Date: Tue, 10 Dec 2002 10:54:01 -0800 From: oliver <opml@terraflux.com> To: Andrew Gallatin <gallatin@cs.duke.edu> Cc: <freebsd-alpha@freebsd.org>, "Schroeder, Aaron" <Aaron.Schroeder@qg.com> Subject: Re: AlphaServer1200 (5305), FBSD4.7 and Symbios53C875 Message-ID: <BA1B7849.5B4%opml@terraflux.com> In-Reply-To: <15862.664.705642.80134@grasshopper.cs.duke.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Drew,
Here is the "rman output":
<SNIP>
OK set debug.rman_debug=1
OK boot -v
\|/-\|/Entering /boot/kernel/kernel at 0xfffffc000033a510...
sio1: gdb debugging port
Unrecognized boot flag '0'.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC1 #0: Mon Dec 9 16:05:50 PST 2002
opi@carmen.terraflux.net:/usr/src/sys/alpha/compile/CARMEN
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc000073a000.
AlphaServer 4100
DIGITAL Server 5000 Model 5305 6533A 5/533 4MB, 531MHz
8192 byte page size, 2 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000200020117
real memory = 534757376 (509 MB)
Physical memory chunk(s):
0x0075c000 - 0x0fffffff, 260718592 bytes (31826 pages)
0x20000000 - 0x2fff3fff, 268386304 bytes (32762 pages)
avail memory = 508575744 (485 MB)
smp_start_secondary: starting cpu 1
smp_start_secondary: cpu 1 started
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Initializing GEOMetry subsystem
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
mcbus0: <MCBUS Backplane Bus>
pcib0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
pcib0: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 4, range 32, base 01ffee00, size 8, enabled
map[14]: type 1, range 32, base 07cfef00, size 8, enabled
found-> vendor=0x1000, dev=0x0001, revid=0x02
bus=0, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=4
found-> vendor=0x1011, dev=0x0024, revid=0x02
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
illegal PCI extended capability offset 8266240
map[10]: type 1, range 32, base 07cff000, size 12, enabled
map[14]: type 4, range 32, base 01ffef00, size 6, enabled
map[18]: type 1, range 32, base 07e00000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=16
sym0: <810> port 0x1ffee00-0x1ffeeff mem 0x7cfef00-0x7cfefff irq 4 at device
1.0 on pci0
rman_reserve_resource: <I/O memory> request: [0x7cfef00, 0x7cfefff], length
0x100, flags 2, device sym0
considering [0, 0x100000000]
truncated region: [0x7cfef00, 0x7cff000]; size 0x101 (requested 0x100)
candidate region: [0x7cff000, 0x7cfef00], size 0x101
splitting region in three parts: [0, 0x7cfeeff]; [0x7cfef00, 0x7cfefff];
[0x7cff000, 0x100000000]
rman_reserve_resource: <PCI Mapped Interrupts> request: [0x4, 0x4], length
0x1, flags 6, device sym0
considering [0, 0x10000]
truncated region: [0x4, 0x5]; size 0x2 (requested 0x1)
candidate region: [0x5, 0x4], size 0x2
splitting region in three parts: [0, 0x3]; [0x4, 0x4]; [0x5, 0x10000]
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 266 msec, 33414 KHz
sym0: Delay (GEN=11): 283 msec, 31407 KHz
sym0: Delay (GEN=11): 282 msec, 31518 KHz
sym0: interrupting at IRQ 0x10 intA (vec 0xb40)
pcib2: <PCI-PCI bridge> at device 2.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x82f0f000-0x47fffff
pcib2: memory decode 0x7d00000-0x7dfffff
pcib2: prefetched decode 0x80000000-0x7fffffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 01fffd00, size 8, enabled
map[14]: type 1, range 32, base 07d9dd00, size 8, enabled
map[18]: type 1, range 32, base 07d9e000, size 13, enabled
found-> vendor=0x1000, dev=0x000f, revid=0x04
bus=2, slot=0, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=8
map[10]: type 4, range 32, base 01fffe00, size 8, enabled
map[14]: type 1, range 32, base 07d9de00, size 8, enabled
map[18]: type 1, range 32, base 07d9f000, size 12, enabled
found-> vendor=0x1000, dev=0x000f, revid=0x04
bus=2, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 01ffff00, size 7, enabled
map[14]: type 1, range 32, base 07d9df00, size 7, enabled
found-> vendor=0x1011, dev=0x0009, revid=0x22
bus=2, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=10
sym1: <875> port 0x1fffd00-0x1fffdff mem
0x7d9e000-0x7d9ffff,0x7d9dd00-0x7d9ddff irq 8 at device 0.0 on pci2
pcib2: device sym1 requested decoded memory range 0x7d9dd00-0x7d9ddff
rman_reserve_resource: <I/O memory> request: [0x7d9dd00, 0x7d9ddff], length
0x100, flags 2, device sym1
considering [0x7cff000, 0x100000000]
truncated region: [0x7d9dd00, 0x7d9de00]; size 0x101 (requested 0x100)
candidate region: [0x7d9de00, 0x7d9dd00], size 0x101
splitting region in three parts: [0x7cff000, 0x7d9dcff]; [0x7d9dd00,
0x7d9ddff]; [0x7d9de00, 0x100000000]
rman_reserve_resource: <PCI Mapped Interrupts> request: [0x8, 0x8], length
0x1, flags 6, device sym1
considering [0x5, 0x10000]
truncated region: [0x8, 0x9]; size 0x2 (requested 0x1)
candidate region: [0x9, 0x8], size 0x2
splitting region in three parts: [0x5, 0x7]; [0x8, 0x8]; [0x9, 0x10000]
pcib2: device sym1 requested decoded memory range 0x7d9e000-0x7d9ffff
rman_reserve_resource: <I/O memory> request: [0x7d9e000, 0x7d9ffff], length
0x2000, flags 2, device sym1
considering [0x7d9de00, 0x100000000]
truncated region: [0x7d9e000, 0x7da0000]; size 0x2001 (requested 0x2000)
candidate region: [0x7da0000, 0x7d9e000], size 0x2001
splitting region in three parts: [0x7d9de00, 0x7d9dfff]; [0x7d9e000,
0x7d9ffff]; [0x7da0000, 0x100000000]
sym1: Delay (GEN=11): 242 msec, 36728 KHz
sym1: Delay (GEN=11): 227 msec, 39155 KHz
sym1: Delay (GEN=11): 227 msec, 39155 KHz
sym1: chip clock is 39155KHz
sym1: clock multiplier assumed
sym1: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/80/01/08/24
sym1: Delay (GEN=11): 250 msec, 35553 KHz
sym1: Delay (GEN=11): 282 msec, 31518 KHz
sym1: Delay (GEN=11): 283 msec, 31407 KHz
sym1: interrupting at IRQ 0x0 intA (vec 0xb80)
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
sym2: <875> port 0x1fffe00-0x1fffeff mem
0x7d9f000-0x7d9ffff,0x7d9de00-0x7d9deff irq 9 at device 1.0 on pci2
pcib2: device sym2 requested decoded memory range 0x7d9de00-0x7d9deff
rman_reserve_resource: <I/O memory> request: [0x7d9de00, 0x7d9deff], length
0x100, flags 2, device sym2
considering [0x7d9de00, 0x7d9dfff]
truncated region: [0x7d9de00, 0x7d9df00]; size 0x101 (requested 0x100)
candidate region: [0x7d9df00, 0x7d9de00], size 0x101
allocating from the beginning
rman_reserve_resource: <PCI Mapped Interrupts> request: [0x9, 0x9], length
0x1, flags 6, device sym2
considering [0x9, 0x10000]
truncated region: [0x9, 0xa]; size 0x2 (requested 0x1)
candidate region: [0xa, 0x9], size 0x2
allocating from the beginning
pcib2: device sym2 requested decoded memory range 0x7d9f000-0x7d9ffff
rman_reserve_resource: <I/O memory> request: [0x7d9f000, 0x7d9ffff], length
0x1000, flags 2, device sym2
considering [0x7d9e000, 0x7d9ffff]
region is allocated
considering [0x7da0000, 0x100000000]
s->r_start (0x7da0000) > end (0x7d9ffff)
no unshared regions found
sym2: failed to allocate RAM resources
device_probe_and_attach: sym2 attach returned 6
de0: <Digital 21140A Fast Ethernet> port 0x1ffff00-0x1ffff7f mem
0x7d9df00-0x7d9df7f irq 10 at device 2.0 on pci2
pcib2: device de0 requested decoded memory range 0x7d9df00-0x7d9df7f
rman_reserve_resource: <I/O memory> request: [0x7d9df00, 0x7d9df7f], length
0x80, flags 2, device de0
considering [0x7d9de00, 0x7d9dfff]
truncated region: [0x7d9df00, 0x7d9df80]; size 0x81 (requested 0x80)
candidate region: [0x7d9df80, 0x7d9df00], size 0x81
splitting region in three parts: [0x7d9de00, 0x7d9deff]; [0x7d9df00,
0x7d9df7f]; [0x7d9df80, 0x7d9dfff]
rman_reserve_resource: <PCI Mapped Interrupts> request: [0xa, 0xa], length
0x1, flags 6, device de0
considering [0x9, 0x10000]
truncated region: [0xa, 0xb]; size 0x2 (requested 0x1)
candidate region: [0xb, 0xa], size 0x2
splitting region in three parts: [0x9, 0x9]; [0xa, 0xa]; [0xb, 0x10000]
de0: interrupting at IRQ 0x0 intA (vec 0xb80)
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:06:2b:00:0c:c5
de0: enabling 10baseT port
de0: bpf attached
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1ffef00-0x1ffef3f mem
0x7e00000-0x7efffff,0x7cff000-0x7cfffff irq 16 at device 4.0 on pci0
rman_reserve_resource: <I/O memory> request: [0x7cff000, 0x7cfffff], length
0x1000, flags 2, device fxp0
considering [0x7cff000, 0x7d9dcff]
truncated region: [0x7cff000, 0x7d00000]; size 0x1001 (requested 0x1000)
candidate region: [0x7d00000, 0x7cff000], size 0x1001
allocating from the beginning
fxp0: using memory space register mapping
rman_reserve_resource: <PCI Mapped Interrupts> request: [0x10, 0x10], length
0x1, flags 6, device fxp0
considering [0xb, 0x10000]
truncated region: [0x10, 0x11]; size 0x2 (requested 0x1)
candidate region: [0x11, 0x10], size 0x2
splitting region in three parts: [0xb, 0xf]; [0x10, 0x10]; [0x11, 0x10000]
fxp0: interrupting at IRQ 0x8 intA (vec 0xc00)
fxp0: Ethernet address 00:90:27:8e:5c:13
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
<SNIP>
Cheers,
Oliver
On 12/10/02 7:04, "Andrew Gallatin" <gallatin@cs.duke.edu> wrote:
>
> Looks like some kind of resource manager problem in FreeBSD.
> Can you enable the rman debugging and boot again with -v?
>
> To enable rman debugging, you should set debug.rman_debug in
> the bootloader:
>
> OK set debug.rman_debug=1
> OK boot -v
>
>
> This is going to be VERY verbose. So verbose that I'm asking you to
> please only send the output from the start of the boot to the end
> of the fxp0 attach. (ie, just past the allocation failure).
>
>
> Drew
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BA1B7849.5B4%opml>