Date: Sat, 22 Jul 2006 22:35:47 -0400 From: Anthony Agelastos <iqgrande@gmail.com> To: Anish Mistry <amistry@am-productions.biz>, asa@agava.com Cc: freebsd-ports@freebsd.org Subject: Re: hpijs/hplip, foomatic-rip, and CUPS 1.2.0 Message-ID: <FE6D200F-D0C9-47E5-9E32-DD7C682CBBFA@gmail.com> In-Reply-To: <D5097704-CEE3-40F0-B2A4-2CBE7BBEB674@gmail.com> References: <379F8941-A4E8-4583-810B-BC9F0D8397F9@gmail.com> <44BB01B2.1070303@yahoo.com> <FC6F81E3-15E6-4230-9C04-59C9FCB16986@gmail.com> <200607171950.08595.amistry@am-productions.biz> <D5097704-CEE3-40F0-B2A4-2CBE7BBEB674@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Jul 22, 2006, at 9:32 PM, Anthony Agelastos wrote: > On Jul 17, 2006, at 7:49 PM, Anish Mistry wrote: > >> On Monday 17 July 2006 19:05, Anthony Agelastos wrote: >>> On Jul 16, 2006, at 11:19 PM, John Merryweather Cooper wrote: >>>> Anthony Agelastos wrote: >>>>> On Jul 16, 2006, at 10:08 PM, John Merryweather Cooper wrote: >>>>>> Anthony Agelastos wrote: >>>>>>> On Jul 16, 2006, at 3:19 PM, Doug Barton wrote: >>>>>>>> For future reference, please don't post to both -ports and - >>>>>>>> questions. >>>>>>> >>>>>>> Thank you for this clarification. >>>>>>> >>>>>>>> Anthony Agelastos wrote: >>>>>>>>> Does anyone out there have network printing working with >>>>>>>>> hpijs/ hplip and >>>>>>>>> CUPS 1.2.0? >>>>>>>> >>>>>>>> Yes. You need to follow the instructions at >>>>>>>> file:///usr/local/share/doc/hplip-0.9.11/install/step4/cups/ >>>>>>>> net.html >>>>>>> >>>>>>> I do not think I explained my situation very well. This >>>>>>> printer (hp LaserJet 1160Le) is connected directly to my >>>>>>> FreeBSD server via USB. If I print something logged on the >>>>>>> server (via lp for instance), it prints. I wish to print to >>>>>>> this printer from all of the computers on my LAN. When I try >>>>>>> to print something from one of these computers, that is when >>>>>>> it bombs and displays the foomatic-rip error message >>>>>>> (foomatic-rip failed). >>>>>>> >>>>>>> The directions on that sheet appear to be if I wanted to print >>>>>>> to this network printer that wasn't directly connected to the >>>>>>> FreeBSD server. Am I mistaken about this? Also, there is no >>>>>>> button on the printer that will print such a page, so I would >>>>>>> have to figure out how to find this IP address by other means. >>>>>>> I cannot see how to find it in the CUPS web interface. I >>>>>>> assume CUPS issues it an IP address. >>>>>>> >>>>>>> The error_log that I have posted on previous threads is >>>>>>> attached to this email (the successful print jobs were done >>>>>>> locally while the error occurred when I printed to the printer >>>>>>> from my MacBook Pro). Does anyone have any suggestions? I >>>>>>> should note that prior to the CUPS upgrade to 1.2.0 (and the >>>>>>> recent gnutls update), my setup was working (I was able to >>>>>>> print from the server itself as well as all of the rest of the >>>>>>> computers on my LAN). I have rebuilt all packages several >>>>>>> times (except for the OS). >>>>>>> >>>>>>> >>>>>>> On my MacBook Pro, when I go to the CUPS web interface, I see >>>>>>> the following for the printer: >>>>>>> hp_LaserJet_1160Le@192.168.0.3 HP LaserJet 1160 Foomatic/ >>>>>>> hpijs (recommended) Description: hp LaserJet 1160Le >>>>>>> Location: Den >>>>>>> Printer State: idle, accepting jobs. >>>>>>> >>>>>>> 192.168.0.3 is the IP address of my FreeBSD server on my LAN. >>>>>>> It looks as if Mac OS X 10.4.7 runs CUPS 1.1.23, but I could >>>>>>> be mistaken. It has found the printer through Bonjour >>>>>>> (zeroconf I believe is another name for it), so I didn't have >>>>>>> to do any configuring. Could there be an incompatibility >>>>>>> within these versions of CUPS? I have found the following page >>>>>>> which lists several issues and talks about how CUPS 1.2.0 is >>>>>>> broken in several places. Could one of these be the issue? >>>>>>> >>>>>>> http://www.bsdforums.org/forums/showthread.php?t=42391 >>>>>>> >>>>>>>>> On a sidenote, I was having difficulties installing hpijs >>>>>>>>> when hplip was >>>>>>>>> already installed >>>>>>>> >>>>>>>> I'm working on that. >>>>>>> >>>>>>> Thank you for your assistance on this. >>>>>>> >>>>>>>> Doug >>>>>>>> >>>>>>>> -- This .signature sanitized for your protection >>>>>>> >>>>>>> -------------------------------------------------------------- >>>>>>> ----- ----- >>>>>>> >>>>>>> _______________________________________________ >>>>>>> freebsd-ports@freebsd.org mailing list >>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-ports >>>>>>> To unsubscribe, send any mail to "freebsd-ports- >>>>>>> unsubscribe@freebsd.org" >>>>>> >>>>>> You need to restart CUPS when the printer "attaches" via USB or >>>>>> else CUPS won't know about the USB port and you'll get this >>>>>> error every time. >>>>> >>>>> I just did a /usr/local/etc/rc.d/cupsd restart and then printed >>>>> something from my laptop. Same error. >>>>> dell# lpstat -t >>>>> scheduler is running >>>>> no system default destination >>>>> device for Create_PDF: cups-pdf:/ >>>>> device for hp_LaserJet_1160Le: /dev/ulpt0 >>>>> Create_PDF accepting requests since Sun Jun 25 11:27:52 2006 >>>>> hp_LaserJet_1160Le accepting requests since Sun Jul 16 22:36:15 >>>>> 2006 printer Create_PDF is idle. enabled since Sun Jun 25 >>>>> 11:27:52 2006 printer hp_LaserJet_1160Le is idle. enabled since >>>>> Sun Jul 16 22:36:15 2006 >>>>> /usr/local/libexec/cups/filter/foomatic-rip failed >>>>> hp_LaserJet_1160Le-30 iqgrande 7168 Sun Jul 16 >>>>> 22:36:02 2006 >>>>> >>>>>> jmc >>>> >>>> What are the permissions/ownership on /dev/ulpt0? >>>> >>>> jmc >>> >>> I do not remember if I created the user + group cups & hplip or if >>> the system automatically did so for me. In any event, there are the >>> following entries: >> The hplip port automatically creates the user. If you are using >> hplip >> then you shouldn't have ulpt in your kernel or be loading it as a >> module. eg. You printer MUST attach as a ugen device. Once it is >> attaching as a ugen device you should run hp-setup to correctly >> configure the printer via the HP utilities. >> >> If there is any confusion I'd suggest updating to 1.6.6a from the >> following PR and following all the instructions in the pkg-message >> from the PR as it explains everything you need to do to get hpluip up >> and running correctly. >> http://www.freebsd.org/cgi/query-pr.cgi?pr=100413 >> >> >> -- Anish Mistry >> amistry@am-productions.biz >> AM Productions http://am-productions.biz/ > I was finally able to get it to attach as a ugen device. > > dell# dmesg | grep ugen > ugen0: Hewlett-Packard hp LaserJet 1160 series, rev 1.10/1.00, addr 2 > > So, I entered the CUPS web administration and it knew about the > printer and had a button to add that specific one, so I did. I > chose the appropriate driver, and then it was installed. So, I > printed a test page and it printed appropriately. So, I went to my > laptop and printed something simple. It did not work. At this > point, I took your advice above and ran hp-setup (as root of > course). Below is what happened with that. > > <hp-setup> > dell# hp-setup > > HP Linux Imaging and Printing System (ver. 0.9.11) > Printer/Fax Setup Utility ver. 2.0 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > Using device: hp:/usb/hp_LaserJet_1160_series?serial=00CNG1R02434 > > Setting up device: hp:/usb/hp_LaserJet_1160_series?serial=00CNG1R02434 > > (Note: Defaults for each question are maked with a '*'. Press > <enter> to accept the default.) > > [ERROR]: Unsupported printer model. > </hp-setup> > > So, I restarted the computer and reprinted the simple text file. > Here is my lpstat info > <lpstat -t> > dell# lpstat -t > scheduler is running > no system default destination > device for Create_PDF: cups-pdf:/ > device for hp_usb_hp_LaserJet_1160_series: hp:/usb/ > hp_LaserJet_1160_series?serial=00CNG1R02434 > Create_PDF accepting requests since Sun Jun 25 11:27:52 2006 > hp_usb_hp_LaserJet_1160_series accepting requests since Sat Jul 22 > 21:00:47 2006 > printer Create_PDF is idle. enabled since Sun Jun 25 11:27:52 2006 > printer hp_usb_hp_LaserJet_1160_series is idle. enabled since Sat > Jul 22 21:00:47 2006 > ready to print > hp_usb_hp_LaserJet_1160_series-37 iqgrande 7168 Sat Jul > 22 21:00:39 2006 > </lpstat -t> > > It sits there and does nothing. Any ideas? In the CUPS web > interface, the job itself just says, "stopped at novalue". Thank > you so much for your help; it has meant a lot to me. I have my /var/ > log/messages file and /var/log/cups/error_log files compressed and > attached to this email. > > Thank you again. > > <error_log.gz> > <messages.gz> > I just noticed the following, if this helps: dell# dmesg | grep ugen ugen0: Hewlett-Packard hp LaserJet 1160 series, rev 1.10/1.00, addr 2 All threads purged from ugen0.1 All threads purged from ugen0.2 All threads purged from ugen0.1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FE6D200F-D0C9-47E5-9E32-DD7C682CBBFA>