Date: Thu, 29 Jul 2010 09:14:25 +0000 From: "Thomas Mueller" <mueller6727@bellsouth.net> To: freebsd-questions@freebsd.org Cc: perryh@pluto.rain.com Subject: Re: Booting from floppy to install 8.1 Message-ID: <4c514671.eAS89s2T1SDVlo2N%mueller6727@bellsouth.net>
next in thread | raw e-mail | index | archive | help
> Should I be able to do a network install of 8.1 using a 7.3 boot > floppy set? (I'm not planning to set up zfs, at least initially.) > If not, are the 7.3 and 8.1 boot/loader files similar enough that > the boot/loader from a 7.3 boot floppy "should" work when all else > in the floppy set is from 8.1? > Is there a reasonable way to build the proper boot/loader file for > an 8.1 boot floppy using a 6.x or 7.x system? I once net-installed FreeBSD using a boot CD from an earlier version; I think it was a disk one rather than boot-only. You have to specify the version to install as 8.1-RELEASE exactly as the ftp servers do; exactly as you would do with freebsd-update. If you use boot floppies, use only the two (or is it three?) needed to boot the install system. I never used zfs, don't have big enough hard drive or enough RAM to justify zfs. You could look into PLoP (http://www.plop.at/) boot manager: may be able to boot CD or USB even when BIOS does not support booting from CD or USB. My computer BIOS supports booting from CD but not USB; however NetBSD 4.0.1 installed on a USB stick booted from PLoP. There are various ways of running/installing PLoP, including installing on a floppy. You might possibly then be able to boot from CD or ATAPI Iomega Zip-250. If I were in your situation, my first choice would be net install, assuming you have cable or DSL; dialup would be awful slow. I have problems finding errorfree floppies: might be able to find two or three to boot, if I'm lucky, but no way could I find enough good floppies to accommodate all those .aa, .ab, .ac ... files. Tom
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4c514671.eAS89s2T1SDVlo2N%mueller6727>