Date: Tue, 20 Jun 2006 20:02:55 -0500 From: "Travis H." <solinym@gmail.com> To: "Peter A. Giessel" <pgiessel@mac.com> Cc: freebsd-questions@freebsd.org Subject: Re: rc.d script for gvinum? Message-ID: <d4f1333a0606201802t46821fcxc57fd385ae98c3b0@mail.gmail.com> In-Reply-To: <448F32A0.3040709@mac.com> References: <d4f1333a0606130731p555022ccv3d882064d6016710@mail.gmail.com> <d4f1333a0606130759y1884cea3t3f22a834735197f2@mail.gmail.com> <448F1225.4080308@mac.com> <d4f1333a0606131312i771c4afaw3d537a70bed55144@mail.gmail.com> <448F32A0.3040709@mac.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> Prepare the disks:
Done:
# disklabel /dev/ad4s1
# /dev/ad4s1:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 398283401 16 unused 0 0
c: 398283417 0 unused 0 0 # "raw" part,
don't edit
# disklabel /dev/ad4s1
# /dev/ad4s1:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 398283401 16 unused 0 0
c: 398283417 0 unused 0 0 # "raw" part,
don't edit
> make a configfile:
Done
# cat /etc/gvinum.conf
drive a device /dev/ad4s1a state up
drive b device /dev/ad2s1a state up
volume www
plex org concat
sd length 12G drive a
volume ports
plex org concat
sd length 10G drive a
volume video
plex org concat
sd length 180G drive b
volume home
plex org concat
sd length 40M drive a
> use gvinum to make the array:
> # gvinum create configfile
Did that before the latest reboot.
> now when you load gvinum it should work.
How exactly do I "load gvinum"?
If I go into gvinum and "create", it gives me a config file thing -
but slightly different -- and when I exit it prints:
2 drives:
D b State: up /dev/ad2s1a A:
194480/194480 MB (100%)
D a State: up /dev/ad4s1a A:
194474/194474 MB (100%)
5 volumes:
V ports State: up Plexes: 0 Size: 0 B
V www State: up Plexes: 0 Size: 0 B
V video State: up Plexes: 0 Size: 0 B
V subversion State: up Plexes: 0 Size: 0 B
V home State: up Plexes: 0 Size: 0 B
5 plexes:
P ports.p0 C State: up Subdisks: 0 Size: 0 B
P www.p0 C State: up Subdisks: 0 Size: 0 B
P video.p0 C State: up Subdisks: 0 Size: 0 B
P subversion.p0 C State: up Subdisks: 0 Size: 0 B
P home.p0 C State: up Subdisks: 0 Size: 0 B
5 subdisks:
S ports.p0.s0 State: up D: a Size: 10 GB
S www.p0.s0 State: up D: a Size: 12 GB
S video.p0.s0 State: up D: b Size: 189 GB
S subversion.p0.s0 State: up D: a Size: 1024 MB
S home.p0.s0 State: up D: a Size: 40 MB
See how all the plexes and volumes are size 0?
> you can now treat /dev/gvinum/array
# ls -la /dev/gvinum
ls: /dev/gvinum: No such file or directory
It was there last time... what happened?
--
Every once in a while you run out of ideas; just keep going.
Security "guru" for rent or hire - http://www.lightconsulting.com/~travis/ -><-
GPG fingerprint: 9D3F 395A DAC5 5CCC 9066 151D 0A6B 4098 0C55 1484
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d4f1333a0606201802t46821fcxc57fd385ae98c3b0>