Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 12 Apr 1999 15:19:42 +0100 (BST)
From:      Richard Tobin <richard@cogsci.ed.ac.uk>
To:        freebsd-stable@FreeBSD.ORG
Subject:   lnc adaptor doesn't work in 3.1-19990407-STABLE
Message-ID:  <199904121419.PAA17394@stevenson.cogsci.ed.ac.uk>

next in thread | raw e-mail | index | archive | help
My "PCNet/PCI Ethernet adapter" has stopped working between 3.1-RELEASE
and 3.1-19990407-STABLE.  It now reports

  lnc1: Device timeout -- Resetting
  lnc1: Missed packet -- no receive buffer

with the second message repeated ad infinitum.  The only difference in the
boot messages is that it now reports 

  lnc1: Memory allocated above 16Mb limit

It fails with the GENERIC kernel (and I can't do a network install) as
well as with my configured kernel.  If I boot /kernel.prev (the
3.1-RELEASE kernel), it all works.

The boot messages follow.

-- Richard

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-19990407-STABLE #0: Fri Apr  9 17:34:33 BST 1999
richard@trubetzkoy.cogsci.ed.ac.uk:/usr/src/sys/compile/TRUBETZKOY
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 166193966 Hz
CPU: Pentium/P54C (166.19-MHz 586-class CPU)
Origin = "GenuineIntel"  Id = 0x52c  Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 67108864 (65536K bytes)
avail memory = 62386176 (60924K bytes)
Preloaded elf kernel "kernel" at 0xf02be000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xf02be09c.
Probing for devices on PCI bus 0:
chip0: <Intel 82437VX PCI cache memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 9 on pci0.17.0
lnc1: <PCNet/PCI Ethernet adapter> rev 0x16 int a irq 10 on pci0.18.0
lnc1: Memory allocated above 16Mb limit
lnc1: PCnet-PCI II address 00:c0:6c:75:81:89
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.19.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for PnP devices:
CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x0c8dfb5a Comp ID: PNPb02f [0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP> sn 0x0c8dfb5a) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pcm0 not probed due to drq conflict with pcm1 at 1
pca0 on motherboard
pca0: PC speaker audio driver
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL ST3.2A>, DMA, 32-bit, multi-block-16
wd0: 3079MB (6306048 sectors), 6256 cyls, 16 heads, 63 S/T, 512 B/S
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
lnc0 not found at 0x280
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
Waiting 2 seconds for SCSI devices to settle
changing root device to wd0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DORS-32160W WA6A> Fixed Direct Access SCSI-2 device 
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
lnc1: Device timeout -- Resetting
lnc1: Missed packet -- no receive buffer



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199904121419.PAA17394>