Date: Wed, 4 Aug 1999 17:34:48 -0700 (PDT) From: Philip Hallstrom <philip@adhesivemedia.com> To: freebsd-questions@freebsd.org Subject: 3.2 won't recognize Hitachi 7730 drive... Message-ID: <Pine.BSF.4.10.9908041729190.46414-100000@velvet.eilio.com>
next in thread | raw e-mail | index | archive | help
Hi -
I am at a loss. I've searched through the mailing lists and read
about this, but no luck.
Setup:
IDE1: 540MB (master), 850MB (slave)
IDE2: Hitachi 7730 (ATAPI according to the manual, master)
When I boot the Windows98 startup disk with CDROM support it finds the
CDROM and everything is okay.
Booting FreeBSD doesn't yield any results at all:
The relevant portion of dmesg. There are no other references to any wdc*
or wcd* devices. I've included the entire dmesg output at the end if it
helps.
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <ST5660A>
wd0: 520MB (1065456 sectors), 1057 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <WDC AC2850F>
wd1: 814MB (1667232 sectors), 1654 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
The relevant portion of my kernal config (entire config at end of file):
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device acd0 #IDE CD-ROM
Any ideas?
Thanks -philip
----------------------------------------------------------------------------
> dmesg | more
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-19990615-STABLE #2: Wed Aug 4 17:19:11 PDT 1999
root@kemper.i.adhesivemedia.com:/usr/src/sys/compile/DADS
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 99716402 Hz
CPU: Pentium/P54C (99.72-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
avail memory = 46305280 (45220K bytes)
Preloaded elf kernel "kernel" at 0xc029c000.
Probing for devices on PCI bus 0:
chip0: <Intel 82437FX PCI cache memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371FB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX Bus-master IDE controller> rev 0x02 on pci0.7.1
vga0: <S3 Trio graphics accelerator> rev 0x00 int a irq 9 on pci0.16.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <ST5660A>
wd0: 520MB (1065456 sectors), 1057 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <WDC AC2850F>
wd1: 814MB (1667232 sectors), 1654 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: aui/utp[*UTP*] address 00:20:af:06:a8:6e
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
changing root device to wd0s1a
----------------------------------------------------------------------------
----------------------------------------------------------------------------
machine "i386"
cpu "I586_CPU"
ident "DADS"
maxusers 32
options INCLUDE_CONFIG_FILE # Include this file in kernel
options GPL_MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS"
req'ed
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS"
req'ed
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options "CD9660_ROOT" #CD-ROM usable as root. "CD9660"
req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP
THIS!]
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
config kernel root on wd0
controller isa0
controller pnp0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device acd0 #IDE CD-ROM
# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? tty
device npx0 at isa? port IO_NPX irq 13
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
device sio2 at isa? disable port "IO_COM3" tty irq 5
device sio3 at isa? disable port "IO_COM4" tty irq 9
# Parallel port
device ppc0 at isa? port? flags 0x40 net irq 7
controller ppbus0
device lpt0 at ppbus?
device plip0 at ppbus?
device ppi0 at ppbus?
#controller vpo0 at ppbus?
device ep0 at isa? port 0x300 net irq 10
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 32
pseudo-device gzip # Exec gzipped a.out's
pseudo-device bpfilter 4 #Berkeley packet filter
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options KTRACE #kernel tracing
# This provides support for System V shared memory and message queues.
#
options SYSVSHM
options SYSVMSG
options SYSVSEM
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9908041729190.46414-100000>