Date: Wed, 5 Sep 2001 02:40:15 +0800 From: "Roman Y. Bogdanov" <peps37@ktk.ru> To: questions@freebsd.org Subject: Matrox G400 dualhead problem Message-ID: <1372410255.20010905024015@ktk.ru>
next in thread | raw e-mail | index | archive | help
... now playing: workstation, notebook and server coolers
I use vidcontrol for set console to 132xsomething, but vidcontrol
don't do it. 80xsomething - ok, on other i got:
vidcontrol: cannot set videomode: Operation not supported by device
What I can do?
Reply to my e-mail please.
In this time I don't read question&hacker mailing list )-;
p.s. my DMESG
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Thu Jun 14 17:43:28 KRAST 2001
brj@peps37.ktk.ru:/usr/src/sys/compile/pepsland
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268369920 (262080K bytes)
avail memory = 257531904 (251496K bytes)
Preloaded elf kernel "kernel" at 0xc0392000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc039209c.
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc00c6974 (c0006974)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 5
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f at device 7.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xd9000000-0xd90fffff,0xd9104000-0xd9104fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:90:27:91:fb:ce
bktr0: <BrookTree 878> mem 0xd9100000-0xd9100fff irq 9 at device 13.0 on pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
smb1: <SMBus general purpose I/O> on smbus1
iic0: <I2C general purpose I/O> on iicbus0
smbus2: <System Management Bus> on bti2c0
smb2: <SMBus general purpose I/O> on smbus2
bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 9
sym0: <875> port 0xd800-0xd8ff mem 0xd9103000-0xd9103fff,0xd9102000-0xd91020ff irq 11 at device 15.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
pcm0: <Creative EMU10K1> port 0xdc00-0xdc1f irq 5 at device 17.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 10 packets/entry by default
DUMMYNET initialized (010124)
ad0: 14659MB <FUJITSU MPF3153AT> [29785/16/63] at ata0-master UDMA33
ad2: 3079MB <QUANTUM FIREBALL SE3.2A> [6256/16/63] at ata1-master UDMA33
Waiting 3 seconds for SCSI devices to settle
(probe5:sym0:0:5:0): phase change 6-7 6@0f899f8c resid=4.
Mounting root from ufs:/dev/ad2s1a
cd0 at sym0 bus 0 target 3 lun 0
cd0: <YAMAHA CRW8824S 1.00> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0 at sym0 bus 0 target 5 lun 0
da0: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device
da0: 3.300MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at sym0 bus 0 target 4 lun 0
cd1: <PLEXTOR CD-ROM PX-40TS 1.11> Removable CD-ROM SCSI-2 device
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
--
Roman Y. Bogdanov
Email: peps37#ktk.ru, ICQ 5535950, http://peps37.ktk.ru/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1372410255.20010905024015>