Date: Sun, 9 Mar 2008 18:31:33 +0200 From: "Anatoli Marinov" <linman800@gmail.com> To: freebsd-questions@freebsd.org Subject: ifconfig ral0 Message-ID: <73505da00803090931w4bd01fc3r408b17d9c2549fbb@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
How I can turn on fast frame and turbo modes for ralink wireless card:
ral0@pci0:2:11:0: class=0x028000 card=0x25611814 chip=0x03011814
rev=0x00 hdr=0x00
vendor = 'Ralink Technology, Corp'
device = 'RT2561/RT61 802.11g PCI'
class = network
The card supports these features under windows but here (freebsd 7.0 stable)
I could not switch the on.
ifconfig -v ral0
ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:0e:2e:ec:e1:3d
inet 172.16.4.1 netmask 0xffffff00 broadcast 172.16.4.255
media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g <hostap>
status: associated
ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:0e:2e:ec:e1:3d
authmode WPA privacy MIXED deftxkey 3
TKIP 2:128-bit
TKIP 3:128-bit powersavemode OFF powersavesleep 100 txpower 50
txpowmax 50.0 rtsthreshold 2346 fragthreshold 2346 bmiss 7
scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11a 7
roam:rate11a 12 roam:rssi11b 7 roam:rate11b 1 roam:rssi11g 7
roam:rate11g 5 -pureg protmode CTS -ht -htcompat -ampdu ampdulimit
8k
ampdudensity - -amsdu -shortgi htprotmode RTSCTS -puren -wme -burst
-ff -dturbo -hidessid apbridge dtimperiod 1 doth inact bintval 100
I tried to execute
ifconfig ral0 ff
ifconfig ral0 dturbo
ifconfig ral0 burst
But all lines filed..
Maybe the BSD driver does not support them.
What do you think?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?73505da00803090931w4bd01fc3r408b17d9c2549fbb>