Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 5 Sep 2001 00:48:37 +0200
From:      Bernd Walter <ticso@mail.cicely.de>
To:        Wilko Bulte <wkb@freebie.xs4all.nl>
Cc:        Diego Montalvo <dmontal2@yahoo.com>, freebsd-alpha@FreeBSD.ORG
Subject:   Re: Installed FreeBSD but cpu error?
Message-ID:  <20010905004837.C13647@cicely20.cicely.de>
In-Reply-To: <20010904192407.C5781@freebie.xs4all.nl>; from wkb@freebie.xs4all.nl on Tue, Sep 04, 2001 at 07:24:07PM %2B0200
References:  <20010904023646.46809.qmail@web13407.mail.yahoo.com> <20010904192407.C5781@freebie.xs4all.nl>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Sep 04, 2001 at 07:24:07PM +0200, Wilko Bulte wrote:
> On Mon, Sep 03, 2001 at 07:36:46PM -0700, Diego Montalvo wrote:
> > Hello,
> > 
> > I am using kern.flp 5.0-20010721 and mfsroot.flp
> > 5.0-20010721 to boot and pre-install FreeBSD.  5.0x is
> > the only boot disk that has been successful with my
> > AS5305.  
> > 
> > I am using FreeBSD 4.3-20010822 STABLE as install
> > CD-ROM,  all works well during install.  I have gone
> > into the "emergency holographic shell" before reboot
> > in order to add the 5.0 Kernel from floppy. (Andrew
> > Gallatin's instructions)  
> > 
> > During reboot  (10..9..8..7) countdown I hit space bar
> > and load "kernel.x from 5.0-20010721"  
> > 
> > It now goes further than before, but still: PANICS...
> > 
> > 
> > panic: cpu_initclocks: no clock attached
> 
> Sounds like a bug in the support for this particular machine type to me.
> Drew is not online this week, he can probably tell you

I'm also seeing reboot problems with an axppci33 system and a recent
-current.
But I did not report, because I have some other problems too and wasn't
able to isolate.
A cold boot or after init works fine.
It wait forever at the Boot: until I type enter.
I have no clue what filename it wants there and it does not ask after
an init.

# reboot
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 1 1 
done
Uptime: 7h30m39s
Rebooting...

halted CPU 0

halt code = 5
HALT instruction executed
PC = fffffc0000562e20
*** no timer interrupts on CPU 0 ***

CPU 0 booting

*** keyboard not plugged in...
(boot dka0.0.0.6.0 -flags 0)
block 0 of dka0.0.0.6.0 is a valid boot block
reading 15 blocks from dka0.0.0.6.0
bootstrap code read in
base = 110000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 102000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Boot: 
Loading 
*** keyboard not plugged in...
Can't open file 

halted CPU 0

halt code = 5
HALT instruction executed
PC = 20000038        
boot failure
>>>iu
iu: No such command
>>>init
*** keyboard not plugged in...
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 1c0c0
memory low limit = 100000
heap = 1c0c0, 17fc0
initializing driver structures
initializing idle process PID
XDELTA not enabled.
initializing file system
initializing 8259s
initializing timer data structures
lowering IPL
CPU 0 speed is 5.98 ns (167MHz)

Powerup process has started
CPU ID = 0
Initialize configuration locks etc.
Configure the memory
Initialising ISA/PCI interrupts.
Configure the PCI Bus
Start tt class, port (graphics, keyboard, then serial) drivers
entering idle loop
change stdin/out/err channels from nl to tt
Memory size = 32Mbytes
testing memory from 800000 to 1e16000 ...
Start driver phase 4
access NVRAM
Build this processor's slot in the hwrpb
Backup Cache size = 0Kb
Init SCSI class driver
Start driver phase 5
AXPpci33 Common Console X4.7-1860, built on Nov  1 1996 at 06:00:01

CPU 0 booting

(boot dka0.0.0.6.0 -flags 0)
block 0 of dka0.0.0.6.0 is a valid boot block
reading 15 blocks from dka0.0.0.6.0
bootstrap code read in
base = 110000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 102000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Loading /boot/loader
*** no timer interrupts on CPU 0 ***
*** keyboard not plugged in...
Console: SRM firmware console
VMS PAL rev: 0x1000400010538
OSF PAL rev: 0x100090002012d
Switch to OSF PAL code succeeded.

FreeBSD/alpha SRM disk boot, Revision 1.1
(ticso@cicely9.cicely.de, Tue Aug 21 15:40:53 CEST 2001)
Memory: 32768 k
[...]

-- 
B.Walter              COSMO-Project         http://www.cosmo-project.de
ticso@cicely.de         Usergroup           info@cosmo-project.de


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010905004837.C13647>