From owner-freebsd-stable@FreeBSD.ORG Sat Jan 27 23:49:16 2007 Return-Path: X-Original-To: stable@freebsd.org Delivered-To: freebsd-stable@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 0939816A4A0 for ; Sat, 27 Jan 2007 23:49:16 +0000 (UTC) (envelope-from clay@milos.co.za) Received: from bart.milos.co.za (bart.milos.co.za [196.38.18.66]) by mx1.freebsd.org (Postfix) with ESMTP id 4DC3313C4DA for ; Sat, 27 Jan 2007 23:49:13 +0000 (UTC) (envelope-from clay@milos.co.za) Received: (qmail 82865 invoked by uid 89); 27 Jan 2007 23:21:41 -0000 Received: from unknown (HELO claylaptop) (clay@milos.za.net@192.168.3.254) by bart.milos.co.za with ESMTPA; 27 Jan 2007 23:21:41 -0000 Message-ID: <058601c7426a$04728890$fe03a8c0@claylaptop> From: "Clayton Milos" To: "Josef Karthauser" References: <20070115112106.GA2304@genius.tao.org.uk><20070115115650.GB2304@genius.tao.org.uk><45AB9BE4.1030606@osoft.us> <20070127224749.GA8203@genius.tao.org.uk> Date: Sun, 28 Jan 2007 01:22:30 +0200 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3028 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3028 Cc: stable@freebsd.org, fs@freebsd.org Subject: Re: mpt problems. (Re: Dell hardware raid 0 (sas5ir) or gmirror?) X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 27 Jan 2007 23:49:16 -0000 On Mon, Jan 15, 2007 at 09:21:08AM -0600, Joe Koberg wrote: > > I just bought two Dell PE-1950's to use as routers. They have LSI Logic > PERC/5i's attached to 80GB SATA drives. I am pretty sure this is the > same card used for SAS. > > One thing is for sure, the mfi(4) card and driver aren't shy! See below > for examples of the kernel messages I get regularly. I am sure drive > failure would be well noted. > > As to rebuilding on-line, I suspect a drive (hot-)swap will initiate the > rebuild. There is a CLI tool (megarc) in ports/sysutils/megarc but I > haven't tried to use it yet. > > All in all I would recommend the PERC/5i. > So I've just picked up a Dell PE-860, with the SAS card. However it doesn't appear to be an mfi(4) card, instead it's an mpt(4) card. And, it doesn't appear to work properly; at least something isn't quite right. I've installed 6.2 on the box, and I'm attempting to create a gmirror with both of the disks attached to the mpt. I've created the filesystem on one of the disks ok (gmirror boot0 on da1s1), and then I attempt to insert the second disk (da0s1). The problem is that the synchronisation appears to progress ok, but when I add some additional load, like cvsuping the ports collection at the same time, after a short period I get loads of errors from the mpt controller and then geom disconnects the drive (da0s1). Wierdly when I reboot the machine the mpt controller refuses to probe da0, and I have to physically power cycle the machine before it sees the drive again. The error messages from mpt are attached in the file called 'messages'. The kernel probe boot time log is attached as dmesg.log. I hope there's a simple fix; I was hoping to commission this machine at the end of this coming week!!!! Joe Hey Joe If you have to power cycle the box for it to work again I'd say the problem is more than likely hardware related and not something FreeBSD unless the driver for the card has the ability to disable the drive on the raid controller which I doubt. -Clay