Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 9 Apr 2009 14:46:07 +0200
From:      Hans Petter Selasky <hselasky@c2i.net>
To:        freebsd-current@freebsd.org
Cc:        Renato Botelho <rbgarga@gmail.com>
Subject:   Re: new usb: mass storage error, Synchronize cache failed
Message-ID:  <200904091446.08486.hselasky@c2i.net>
In-Reply-To: <747dc8f30904090431nc7c8b4cx5be4a5f4023af2af@mail.gmail.com>
References:  <747dc8f30904071139j32b55e2pf0fcd07a51c260a2@mail.gmail.com> <200904082247.18866.hselasky@c2i.net> <747dc8f30904090431nc7c8b4cx5be4a5f4023af2af@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 09 April 2009, Renato Botelho wrote:
> On Wed, Apr 8, 2009 at 5:47 PM, Hans Petter Selasky <hselasky@c2i.net>=20
wrote:
> > On Wednesday 08 April 2009, Renato Botelho wrote:
> >> umass0: =A0SCSI over Bulk-Only; quirks =3D 0x0000
> >
> > umass0: =A0SCSI over Bulk-Only; quirks =3D 0x0000
> >
> > If the quirks print is still zero, then your patch is not correct, or y=
ou
> > have not recompiled and installed the patched files!
>
> Sorry, my fault, I made a mistake on product ID, but it still doesn't
> work, here is the new dmesg:
>
> ugen1.2: <EZZE-E800GF> at usbus1
> umass0: <EZZE -Storage> on usbus1
> umass0:  SCSI over Bulk-Only; quirks =3D 0x4000
> umass0:0:0:-1: Attached to scbus0
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <GF-500  > Removable Direct Access SCSI-0 device
> da0: 1.000MB/s transfers
> da0: 982MB (2012160 512 byte sectors: 64H 32S/T 982C)
> da1 at umass-sim0 bus 0 target 0 lun 1
> da1: <GF-500  > Removable Direct Access SCSI-0 device
> da1: 1.000MB/s transfers
> da1: 1MB (3668 512 byte sectors: 64H 32S/T 1C)
> GEOM: da0: partition 1 does not start on a track boundary.
> GEOM: da0: partition 1 does not end on a track boundary.
> ugen1.2: <EZZE-E800GF> at usbus1 (disconnected)
> umass0: at uhub1, port 1, addr 2 (disconnected)
> (da1:umass-sim0:0:0:1): Synchronize cache failed, status =3D=3D 0x3f, scsi
> status =3D=3D 0x0
> (da0:umass-sim0:0:0:0): lost device
> (da0:umass-sim0:0:0:0): removing device entry
> (da1:umass-sim0:0:0:1): lost device
> (da1:umass-sim0:0:0:1): removing device entry

Try adding more of the possible quirks.

=2D-HPS



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200904091446.08486.hselasky>