Date: Wed, 14 Dec 2016 09:32:14 +0800 From: Ganbold Tsagaankhuu <ganbold@gmail.com> To: John.Kitz@xs4all.nl Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: When first hooking up a cubieboard2... Message-ID: <CAGtf9xPQq1qGjmHci4n52uXx=E%2ByuHrNkRcuAyDDQvRt8a5rYQ@mail.gmail.com> In-Reply-To: <585066dd.1c7c630a.8fe44.4233SMTPIN_ADDED_BROKEN@mx.google.com> References: <585066dd.1c7c630a.8fe44.4233SMTPIN_ADDED_BROKEN@mx.google.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Dec 14, 2016 at 5:22 AM, John W. Kitz <John.Kitz@xs4all.nl> wrote: > Hi, > > > > When attaching a new cubieboard2 to a FreeBSD system for the first time I > get: > > > > "ugen1.2: <USB Developer> at usbus1 > > umass0: <Mass Storage> on usbus1 > > umass0: SCSI over Bulk-Only; quirks = 0x4000 > > umass0:4:0: Attached to scbus4 > > > > da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 > > da0: <USB 2.0 USB Flash Driver 0100> Removable Direct Access SCSI-2 device > > da0: 40.000MB/s transfers > > da0: Attempt to query device size failed: NOT READY, Medium not present > > da0: quirks=0x2<NO_6_BYTE> > > > > da1 at umass-sim0 bus 0 scbus4 target 0 lun 1 > > da1: <USB 2.0 USB Flash Driver 0100> Removable Direct Access SCSI-2 device > > da1: 40.000MB/s transfers > > da1: Attempt to query device size failed: NOT READY, Medium not present > > da1: quirks=0x2<NO_6_BYTE> > > > > da2 at umass-sim0 bus 0 scbus4 target 0 lun 2 > > da2: <USB 2.0 USB Flash Driver 0100> Removable Direct Access SCSI-2 device > > da2: 40.000MB/s transfers > > da2: Attempt to query device size failed: NOT READY, Medium not present > > da2: quirks=0x2<NO_6_BYTE>" > > > > While looking at the hardware schematic, am I correct in assuming that da0 > represents the SD card slot, and da1 and da2 represent USB port 1 and 2 > respectively? > I don't remember the details, but there are 2 USB host ports exposed on the board, and 1 USB otg port. SD would be mmcsd0. Ganbold > > > > Regards, Jk. > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGtf9xPQq1qGjmHci4n52uXx=E%2ByuHrNkRcuAyDDQvRt8a5rYQ>