Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 01 Jul 2012 15:29:41 +0200
From:      joerg_surmann <joerg_surmann@snafu.de>
To:        freebsd-stable@freebsd.org
Subject:   Re: geli decrypt only one partition
Message-ID:  <4FF050C5.7050909@snafu.de>
In-Reply-To: <20120621122133.2fed5862@fabiankeil.de>
References:  <20120620202807.66fdf248@fabiankeil.de> <70eb69bde16fba598b2701be9654624885f0936c@mein.snafu.de> <20120621122133.2fed5862@fabiankeil.de>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------090205030003050303070005
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Fabian and all,

Sorry, i no had enough time for this geli problem.
I work with a testsystem.
When start booting in verbose mode the system found the keypaths.

Preloaded ada0p4:geli_keyfile0 "/root/keys/ada0p4.key" at 0xc14bf540.
Preloaded ada1p4:geli_keyfile1 "/root/keys/ada1p4.key" at 0xc14bf598.

loader.conf
geom_eli_load="YES"

geli_ada0p4_keyfile0_load="YES"
geli_ada0p4_keyfile0_type="ada0p4:geli_keyfile0"
geli_ada0p4_keyfile0_name="/root/keys/ada0p4.key"

geli_ada1p4_keyfile1_load="YES"
geli_ada1p4_keyfile1_type="ada1p4:geli_keyfile1"
geli_ada1p4_keyfile1_name="/root/keys/ada1p4.key"

zfs_load="YES"
vfs.root.mountfrom="zfs:zroot"

on boottime i can decrypt ada0p4.
for ada1p4 ... wrong key.

i can decrypt ada1p4 later by hand with the keyfile like loader.conf.
same situation.
ada0p4 and ada1p4 are a zfs mirror.

On the attachement the dmesg file direct after login.

Thanks for help.

Suri




Am 21.06.12 12:21, schrieb Fabian Keil:
> joerg_surmann@snafu.de wrote:
> 
>> the keyfile in loader.conf is correct.
> 
> Did you verify that you get the boot message I quoted in the
> previous mail for both keyfiles? This would surprise me.
> 
>> when i decrypt ada1p3 via geli attach -k /priv/keys/ada1p3
>> /dev/ada1p3 ........ ada1p3.eli created
>> 
>> in loader.conf is the same path specified.
>> 
>> geli_ada1p3_keyfile1_load="YES" 
>> geli_ada1p3_keyfile1_type="ada1p3:geli_keyfile1" 
>> geli_ada1p3_keyfile1_name="/priv/keys/ada1p3.key"
>> 
>> only ada0p3 (keyfile0 in loader.conf) will decrypt on boottime. 
>> for ada1p3 comes wrong key.
>> 
>> any suggestions.
> 
> I suspect the problem is that you named the first keyfile for 
> ada1p3 keyfile1 instead of keyfile0. The keyfile numeration 
> restarts for each provider and the kernel will not load keyfile1 if
> keyfile0 doesn't exist.
> 
> Fabian
> 

-----BEGIN PGP SIGNATURE-----
Version: GnuPG/MacGPG2 v2.0.12 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
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=Z/eq
-----END PGP SIGNATURE-----

--------------090205030003050303070005
Content-Type: text/plain; charset=UTF-8;
 name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename="dmesg.txt"

ehci0: Dropped interrupts workaround enabled
usbus3: EHCI version 1.0
usbus3: <VIA VT6202 USB 2.0 controller> on ehci0
usbus3: bpf attached
ehci0: usbpf: Attached
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 51
ata1: <ATA channel 1> on atapci0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 52
pcm0: <VIA VT8235> port 0xdc00-0xdcff irq 22 at device 17.5 on pci0
pci0: set ACPI power state D0 on \\_SB_.PCI0.AC9_
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 53
pcm0: <VIA Technologies VIA1612A AC97 Codec (id = 0x56494161)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Reserved 27
pcm0: Primary codec extended features variable rate PCM, AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 2286000, 1000; 0xc3686000 -> 2286000
pcm0: sndbuf_setmap 2336000, 1000; 0xc3736000 -> 2336000
pcm0: sndbuf_setmap 2334000, 1000; 0xc3734000 -> 2334000
pcm0: sndbuf_setmap 2332000, 1000; 0xc3732000 -> 2332000
pcm0: sndbuf_setmap 2330000, 1000; 0xc3730000 -> 2330000
pcm0: sndbuf_setmap 233f000, 1000; 0xc373f000 -> 233f000
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd800-0xd8ff mem 0xdffffd00-0xdffffdff irq 23 at device 18.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x74
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy0: OUI 0x0002c6, model 0x0032, rev. 8
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:0b:6a:17:53:a0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54
acpi_button1: <Sleep Button> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 55
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56
uart0: fast interrupt
ppc0: using extended I/O port range
ppc0: SPP ECP  ECP+EPP
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 57
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 59
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 60
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xcbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xcc000-0xcc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xcc800-0xccfff) for rid 1 of orm0
pcib0: allocated type 3 (0xcd000-0xcd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xcd800-0xcdfff) for rid 1 of orm0
pcib0: allocated type 3 (0xce000-0xce7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xce800-0xcefff) for rid 1 of orm0
pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xcf800-0xcffff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
            add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
lapic: Divisor 2, Frequency 132996202 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA> at usbus3
uhub3: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3
(aprobe0:ata0:0:0:0): SIGNATURE: 0000
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=10 stat1=00 devices=0x30000
(aprobe1:ata1:0:0:0): SIGNATURE: eb14
(aprobe0:ata0:0:1:0): SIGNATURE: 0000
(aprobe1:ata1:0:1:0): SIGNATURE: eb14
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <SAMSUNG DVD-ROM SD-616T F300> Removable CD-ROM SCSI-0 device 
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: (cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
cd1 at ata1 bus 0 scbus1 target 1 lun 0
cd1: <_NEC CD-RW NR-9100A 1.41> Removable CD-ROM SCSI-0 device 
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present
<SAMSUNG SP0411N TW100-08> ATA-7 device
ada0: Serial Number 0611J1EW818312
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 38204MB (78242976 512 byte sectors: 16H 255S/T 16383C)
ada0: Previously was known as ad0
ada1 at ata0 bus 0 scbus0 target 1 lun 0
ada1: <SAMSUNG SP0411N TW100-08> ATA-7 device
ada1: Serial Number 0611J1FW844879
ada1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada1: 38204MB (78242976 512 byte sectors: 16H 255S/T 16383C)
ada1: Previously was known as ad1
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <SAMSUNG SP0411N TW100-08> ATA-7 device
pass0: Serial Number 0611J1EW818312
pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
pass1 at ata0 bus 0 scbus0 target 1 lun 0
pass1: <SAMSUNG SP0411N TW100-08> ATA-7 device
pass1: Serial Number 0611J1FW844879
pass1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
pass2 at ata1 bus 0 scbus1 target 0 lun 0
pass2: <SAMSUNG DVD-ROM SD-616T F300> Removable CD-ROM SCSI-0 device 
pass2: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
pass3 at ata1 bus 0 scbus1 target 1 lun 0
pass3: <_NEC CD-RW NR-9100A 1.41> Removable CD-ROM SCSI-0 device 
pass3: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
Timecounter "TSC" frequency 1662490831 Hz quality 800
GEOM: new disk cd0
GEOM: new disk cd1
GEOM: new disk ada0
GEOM: new disk ada1
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
Enter passphrase for ada0p4: uhub3: 6 ports with 6 removable, self powered

GEOM_ELI: Device ada0p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software
Enter passphrase for ada1p4: 
GEOM_ELI: Wrong key for ada1p4. Tries left: 2.
Enter passphrase for ada1p4: 
GEOM_ELI: Wrong key for ada1p4. Tries left: 1.
Enter passphrase for ada1p4: 
GEOM_ELI: Wrong key for ada1p4. No tries left.
Enter passphrase for gptid/fb8ada9c-c360-11e1-a04d-00047691818e: 
GEOM_ELI: Wrong key for gptid/fb8ada9c-c360-11e1-a04d-00047691818e. Tries left: 2.
Enter passphrase for gptid/fb8ada9c-c360-11e1-a04d-00047691818e: 
GEOM_ELI: Wrong key for gptid/fb8ada9c-c360-11e1-a04d-00047691818e. Tries left: 1.
Enter passphrase for gptid/fb8ada9c-c360-11e1-a04d-00047691818e: 
GEOM_ELI: Wrong key for gptid/fb8ada9c-c360-11e1-a04d-00047691818e. No tries left.
Trying to mount root from zfs:zroot []...
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
start_init: trying /sbin/init
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 done
All buffers synced.
Swap device zvol/zroot/swap removed.
Uptime: 4m50s
pcib0: wake_prep disabled wake for \\_SB_.PCI0 (S5)
uart0: wake_prep disabled wake for \\_SB_.PCI0.UAR1 (S5)
uhci0: wake_prep disabled wake for \\_SB_.PCI0.USB1 (S5)
uhci1: wake_prep disabled wake for \\_SB_.PCI0.USB2 (S5)
uhci2: wake_prep disabled wake for \\_SB_.PCI0.USB3 (S5)
ehci0: wake_prep disabled wake for \\_SB_.PCI0.EHCI (S5)
unknown: wake_prep disabled wake for \\_SB_.PCI0.SBRG.PS2M (S5)
atkbdc0: wake_prep disabled wake for \\_SB_.PCI0.SBRG.PS2K (S5)
pcm0: wake_prep disabled wake for \\_SB_.PCI0.AC9_ (S5)
unknown: wake_prep disabled wake for \\_SB_.PCI0.MC9_ (S5)
vr0: wake_prep disabled wake for \\_SB_.PCI0.ILAN (S5)
acpi_button1: wake_prep disabled wake for \\_SB_.SLPB (S5)
Rebooting...
Table 'FACP' at 0x1dff0030
Table 'APIC' at 0x1dff00c0
APIC: Found table at 0x1dff00c0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:15:25 UTC 2012
    root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Table 'FACP' at 0x1dff0030
Table 'APIC' at 0x1dff00c0
ACPI: No SRAT table found
Preloaded elf kernel "/boot/kernel/kernel" at 0xc14bf000.
Preloaded elf module "/boot/kernel/zfs.ko" at 0xc14bf188.
Preloaded elf module "/boot/kernel/opensolaris.ko" at 0xc14bf230.
Preloaded elf module "/boot/kernel/geom_eli.ko" at 0xc14bf2e0.
Preloaded elf module "/boot/kernel/crypto.ko" at 0xc14bf390.
Preloaded elf module "/boot/kernel/zlib.ko" at 0xc14bf43c.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xc14bf4e8.
Preloaded ada0p4:geli_keyfile0 "/root/keys/ada0p4.key" at 0xc14bf540.
Preloaded ada1p4:geli_keyfile1 "/root/keys/ada1p4.key" at 0xc14bf598.
Calibrating TSC clock ... TSC clock: 1662491372 Hz
CPU: AMD Athlon(tm) XP 2000+ (1662.49-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Family = 6  Model = 8  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400800<SYSCALL,MMX+,3DNow!+,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 536870912 (512 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001826000 - 0x000000001d729fff, 468729856 bytes (114436 pages)
avail memory = 469028864 (447 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <AMIINT VIA_K7  >
bios32: Found BIOS32 Service Directory header at 0xc00fdab0
bios32: Entry = 0xfdac0 (c00fdac0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdae1
pnpbios: Found PnP BIOS data at 0xc00f7a80
pnpbios: Entry = f0000:691b  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
ULE: setup cpu 0
ACPI: RSDP 0xfa700 00014 (v00 AMI   )
ACPI: RSDT 0x1dff0000 0002C (v01 AMIINT VIA_K7   00000010 MSFT 00000097)
ACPI: FACP 0x1dff0030 00081 (v01 AMIINT VIA_K7   00000011 MSFT 00000097)
ACPI: DSDT 0x1dff0120 0314B (v01    VIA    KM266 00001000 MSFT 0100000D)
ACPI: FACS 0x1dff8000 00040
ACPI: APIC 0x1dff00c0 00054 (v01 AMIINT VIA_K7   00000009 MSFT 00000097)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
crypto: <crypto core>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
CPU0: local APIC error 0x80
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
acpi0: <AMIINT VIA_K7> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc30b7000 pa 0x1000
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=31161106)
pcibios: BIOS version 2.10
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0    5   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   12   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   12   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000-0xdffff
pcib0: Length mismatch for 3 range: dfe00000 vs dec00000
pcib0: decoding 3 range 0x20000000-0xffdfffff
pcib0: decoding 3 range 0xfee01000-0xffdfffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1106, dev=0x3116, revid=0x00
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled
pcib0: allocated type 3 (0xe0000000-0xe7ffffff) for rid 10 of pci0:0:0:0
found->	vendor=0x1106, dev=0xb091, revid=0x00
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D3  current D0
found->	vendor=0x10b7, dev=0x9200, revid=0x74
	domain=0, bus=0, slot=9, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type I/O Port, range 32, base 0xec00, size  7, enabled
pcib0: allocated type 4 (0xec00-0xec7f) for rid 10 of pci0:0:9:0
	map[14]: type Memory, range 32, base 0xdfffff80, size  7, enabled
pcib0: allocated type 3 (0xdfffff80-0xdfffffff) for rid 14 of pci0:0:9:0
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 17
found->	vendor=0x1106, dev=0x3038, revid=0x80
	domain=0, bus=0, slot=16, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type I/O Port, range 32, base 0xe000, size  5, enabled
pcib0: allocated type 4 (0xe000-0xe01f) for rid 20 of pci0:0:16:0
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 21
found->	vendor=0x1106, dev=0x3038, revid=0x80
	domain=0, bus=0, slot=16, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type I/O Port, range 32, base 0xe400, size  5, enabled
pcib0: allocated type 4 (0xe400-0xe41f) for rid 20 of pci0:0:16:1
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found->	vendor=0x1106, dev=0x3038, revid=0x80
	domain=0, bus=0, slot=16, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type I/O Port, range 32, base 0xe800, size  5, enabled
pcib0: allocated type 4 (0xe800-0xe81f) for rid 20 of pci0:0:16:2
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 21
found->	vendor=0x1106, dev=0x3104, revid=0x82
	domain=0, bus=0, slot=16, func=3
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=12
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xdffffe00, size  8, enabled
pcib0: allocated type 3 (0xdffffe00-0xdffffeff) for rid 10 of pci0:0:16:3
pcib0: matched entry for 0.16.INTD
pcib0: slot 16 INTD hardwired to IRQ 21
found->	vendor=0x1106, dev=0x3177, revid=0x00
	domain=0, bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x0571, revid=0x06
	domain=0, bus=0, slot=17, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:17:1
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:17:1
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:17:1
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:17:1
	map[20]: type I/O Port, range 32, base 0xfc00, size  4, enabled
pcib0: allocated type 4 (0xfc00-0xfc0f) for rid 20 of pci0:0:17:1
found->	vendor=0x1106, dev=0x3059, revid=0x50
	domain=0, bus=0, slot=17, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type I/O Port, range 32, base 0xdc00, size  8, enabled
pcib0: allocated type 4 (0xdc00-0xdcff) for rid 10 of pci0:0:17:5
pcib0: matched entry for 0.17.INTC
pcib0: slot 17 INTC hardwired to IRQ 22
found->	vendor=0x1106, dev=0x3065, revid=0x74
	domain=0, bus=0, slot=18, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type I/O Port, range 32, base 0xd800, size  8, enabled
pcib0: allocated type 4 (0xd800-0xd8ff) for rid 10 of pci0:0:18:0
	map[14]: type Memory, range 32, base 0xdffffd00, size  8, enabled
pcib0: allocated type 3 (0xdffffd00-0xdffffdff) for rid 14 of pci0:0:18:0
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
agp0: <VIA XM266 (PM266/KM266) host to PCI bridge> on hostb0
agp0: allocating GATT for aperture of size 128M
agp0: aperture size is 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib0: allocated type 3 (0xdfd00000-0xdfefffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xcfc00000-0xdfbfffff) for rid 24 of pcib1
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   memory decode     0xdfd00000-0xdfefffff
pcib1:   prefetched decode 0xcfc00000-0xdfbfffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x5333, dev=0x8d04, revid=0x00
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xdfe80000, size 19, enabled
pcib1: allocated memory range (0xdfe80000-0xdfefffff) for rid 10 of pci0:1:0:0
	map[14]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, enabled
pcib1: allocated prefetch range (0xd0000000-0xd7ffffff) for rid 14 of pci0:1:0:0
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
vgapci0: <VGA-compatible display> mem 0xdfe80000-0xdfefffff,0xd0000000-0xd7ffffff irq 16 at device 0.0 on pci1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xdfffff80-0xdfffffff irq 17 at device 9.0 on pci0
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <Broadcom 3c905C internal PHY> PHY 24 on miibus0
xlphy0: OUI 0x000818, model 0x0017, rev. 6
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
xl0: bpf attached
xl0: Ethernet address: 00:04:76:91:81:8e
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 49
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.0 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
usbus0: <VIA 83C572 USB controller> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.1 on pci0
usbus1: <VIA 83C572 USB controller> on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
uhci2: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 21 at device 16.2 on pci0
usbus2: <VIA 83C572 USB controller> on uhci2
usbus2: bpf attached
uhci2: usbpf: Attached
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xdffffe00-0xdffffeff irq 21 at device 16.3 on pci0
ehci0: Dropped interrupts workaround enabled
usbus3: EHCI version 1.0
usbus3: <VIA VT6202 USB 2.0 controller> on ehci0
usbus3: bpf attached
ehci0: usbpf: Attached
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 51
ata1: <ATA channel 1> on atapci0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 52
pcm0: <VIA VT8235> port 0xdc00-0xdcff irq 22 at device 17.5 on pci0
pci0: set ACPI power state D0 on \\_SB_.PCI0.AC9_
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 53
pcm0: <VIA Technologies VIA1612A AC97 Codec (id = 0x56494161)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Reserved 27
pcm0: Primary codec extended features variable rate PCM, AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 2286000, 1000; 0xc3686000 -> 2286000
pcm0: sndbuf_setmap 2336000, 1000; 0xc3736000 -> 2336000
pcm0: sndbuf_setmap 2334000, 1000; 0xc3734000 -> 2334000
pcm0: sndbuf_setmap 2332000, 1000; 0xc3732000 -> 2332000
pcm0: sndbuf_setmap 2330000, 1000; 0xc3730000 -> 2330000
pcm0: sndbuf_setmap 233f000, 1000; 0xc373f000 -> 233f000
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd800-0xd8ff mem 0xdffffd00-0xdffffdff irq 23 at device 18.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x74
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy0: OUI 0x0002c6, model 0x0032, rev. 8
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:0b:6a:17:53:a0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54
acpi_button1: <Sleep Button> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 55
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56
uart0: fast interrupt
ppc0: using extended I/O port range
ppc0: SPP ECP  ECP+EPP
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 57
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 59
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 60
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xcbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xcc000-0xcc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xcc800-0xccfff) for rid 1 of orm0
pcib0: allocated type 3 (0xcd000-0xcd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xcd800-0xcdfff) for rid 1 of orm0
pcib0: allocated type 3 (0xce000-0xce7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xce800-0xcefff) for rid 1 of orm0
pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xcf800-0xcffff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
            add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
lapic: Divisor 2, Frequency 132996161 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA> at usbus3
uhub3: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3
(aprobe0:ata0:0:0:0): SIGNATURE: 0000
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=10 stat1=00 devices=0x30000
(aprobe1:ata1:0:0:0): SIGNATURE: eb14
(aprobe0:ata0:0:1:0): SIGNATURE: 0000
(aprobe1:ata1:0:1:0): SIGNATURE: eb14
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <SAMSUNG DVD-ROM SD-616T F300> Removable CD-ROM SCSI-0 device 
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG SP0411N TW100-08> ATA-7 device
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
cd1 at ata1 bus 0 scbus1 target 1 lun 0
cd1: <_NEC CD-RW NR-9100A 1.41> Removable CD-ROM SCSI-0 device 
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present
ada0: Serial Number 0611J1EW818312
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 38204MB (78242976 512 byte sectors: 16H 255S/T 16383C)
ada0: Previously was known as ad0
ada1 at ata0 bus 0 scbus0 target 1 lun 0
ada1: <SAMSUNG SP0411N TW100-08> ATA-7 device
ada1: Serial Number 0611J1FW844879
ada1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada1: 38204MB (78242976 512 byte sectors: 16H 255S/T 16383C)
ada1: Previously was known as ad1
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <SAMSUNG SP0411N TW100-08> ATA-7 device
pass0: Serial Number 0611J1EW818312
pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
pass1 at ata0 bus 0 scbus0 target 1 lun 0
pass1: <SAMSUNG SP0411N TW100-08> ATA-7 device
pass1: Serial Number 0611J1FW844879
pass1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
pass2 at ata1 bus 0 scbus1 target 0 lun 0
pass2: <SAMSUNG DVD-ROM SD-616T F300> Removable CD-ROM SCSI-0 device 
pass2: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
pass3 at ata1 bus 0 scbus1 target 1 lun 0
pass3: <_NEC CD-RW NR-9100A 1.41> Removable CD-ROM SCSI-0 device 
pass3: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
Timecounter "TSC" frequency 1662491372 Hz quality 800
GEOM: new disk cd0
GEOM: new disk cd1
GEOM: new disk ada0
GEOM: new disk ada1
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
Enter passphrase for ada0p4: uhub3: 6 ports with 6 removable, self powered

GEOM_ELI: Device ada0p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software
Enter passphrase for ada1p4: 
GEOM_ELI: Wrong key for ada1p4. Tries left: 2.
Enter passphrase for ada1p4: 
GEOM_ELI: Wrong key for ada1p4. Tries left: 1.
Enter passphrase for ada1p4: 
GEOM_ELI: Wrong key for ada1p4. No tries left.
Enter passphrase for gptid/fb8ada9c-c360-11e1-a04d-00047691818e: 
GEOM_ELI: Wrong key for gptid/fb8ada9c-c360-11e1-a04d-00047691818e. Tries left: 2.
Enter passphrase for gptid/fb8ada9c-c360-11e1-a04d-00047691818e: 
GEOM_ELI: Wrong key for gptid/fb8ada9c-c360-11e1-a04d-00047691818e. Tries left: 1.
Enter passphrase for gptid/fb8ada9c-c360-11e1-a04d-00047691818e: 
GEOM_ELI: Wrong key for gptid/fb8ada9c-c360-11e1-a04d-00047691818e. No tries left.
Trying to mount root from zfs:zroot []...
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd1:ata1:0:1:0): SCSI status error
(cd1:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata1:0:1:0): CAM status: SCSI Status Error
(cd1:ata1:0:1:0): SCSI status: Check Condition
(cd1:ata1:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata1:0:1:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
start_init: trying /sbin/init

--------------090205030003050303070005--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FF050C5.7050909>