Date: Wed, 19 Apr 2000 16:07:52 +0700 (NOVST) From: Alex Morozov <alex@idisys.iae.nsk.su> To: Warner Losh <imp@village.org> Cc: mobile@freebsd.org Subject: Re: We're reading CIS! Message-ID: <Pine.LNX.4.10.KSI2mu3.10004191606390.9645-100000@idisys.iae.nsk.su> In-Reply-To: <200004190844.CAA99540@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Does this mean that we're getting proper support for memory mapped cards? Finally! On Wed, 19 Apr 2000, Warner Losh wrote: > > OK. Looks like the newcard stuff is reading CIS. Yippie skippie! > attachment code and to convert some drivers to use this and to shake > out that stuff. Also, need to consider the proper way to deal with > the running of scripts on card events currently done by pccardd, as > well as a way to get pccardc dumpcis and other functions into the new > system. > > Here's the edited dmesg from my last test run before the commit, > followed by a pccardc dumpcis to show that things appear to be > working: > > pcic0: intr > pccard0: 00 CD 7f > pccard0: enqueing INSERTION event > pccard0: insertion event > pcic_attach_card h 0xc0aa2844 h->dev 0xc0aa1a80 pccard pcic > pccard0: pccard_card_attach > pccard0: chip_socket_enable > pccard0: pcic_chip_socket_enable cardtype mem 40 > pccard0: read_cis > Calling scan_cis > pcic_chip_mem_map window 0 bus 0+0+400 at card addr 0 > pcic_chip_do_mem_map window 0: 0000 8000 0000 > 0xc0a9aa80 0xc0aa1a80 3 0 0x1 > pcic_chip_do_mem_map window 0: 00d2 80d2 4000 > cis mem map c00d2000 > pccard0: CIS tuple chain: > CISTPL_DEVICE type=null speed=null > 01 03 00 00 ff > CISTPL_FUNCID > 21 02 06 00 > CISTPL_VERS_1 > 15 47 04 01 4d 65 67 61 68 65 72 74 7a 00 43 43 > 31 30 42 54 2f 32 00 50 43 4d 43 49 41 20 31 30 > 42 41 53 45 2d 54 2f 32 20 45 54 48 45 52 4e 45 > 54 20 41 44 41 50 54 45 52 00 30 30 30 30 38 36 > 31 30 32 42 43 30 00 00 ff > CISTPL_CONFIG > 1a 05 01 01 00 03 01 > CISTPL_CFTABLE_ENTRY > 1b 0c c1 01 19 71 55 06 0e 2d 64 30 ff ff > CISTPL_CFTABLE_ENTRY > 1b 05 83 01 08 65 ff > CISTPL_MANFID > 20 04 28 01 03 01 > CISTPL_NO_LINK > 14 00 > CISTPL_END > ff > pccard0: chip_socket_disable > pcic_chip_socket_disable > pccard0: check_cis_quirks > pccard0: functions scanning > > ######## should have attached cards here. :-( > > pcic0: intr > pccard0: 00 CD 37 > pccard0: detaching card > pccard0: enqueing REMOVAL event > pcic0: intr > pccard0: 00 CD 33 > pccard0: removal event > pcic_detach_card: already detached > > Notice that the above compares well to the dumpcis for the card, shown > below: > > Configuration data for card in slot 0 > Tuple #1, code = 0x1 (Common memory descriptor), length = 3 > 000: 00 00 ff > Common memory device information: > Device number 1, type No device, WPS = OFF > Speed = No speed, Memory block size = 512b, 1 units > Tuple #2, code = 0x21 (Functional ID), length = 2 > 000: 06 00 > Network/LAN adapter > Tuple #3, code = 0x15 (Version 1 info), length = 71 > 000: 04 01 4d 65 67 61 68 65 72 74 7a 00 43 43 31 30 > 010: 42 54 2f 32 00 50 43 4d 43 49 41 20 31 30 42 41 > 020: 53 45 2d 54 2f 32 20 45 54 48 45 52 4e 45 54 20 > 030: 41 44 41 50 54 45 52 00 30 30 30 30 38 36 31 30 > 040: 32 42 43 30 00 00 ff > Version = 4.1, Manuf = [Megahertz],card vers = [CC10BT/2] > Addit. info = [PCMCIA 10BASE-T/2 ETHERNET ADAPTER],[000086102BC0],[] > Tuple #4, code = 0x1a (Configuration map), length = 5 > 000: 01 01 00 03 01 > Reg len = 2, config register addr = 0x300, last config = 0x1 > Registers: X------- > Tuple #5, code = 0x1b (Configuration entry), length = 12 > 000: c1 01 19 71 55 06 0e 2d 64 30 ff ff > Config index = 0x1(default) > Interface byte = 0x1 (I/O) > Vcc pwr: > Nominal operating supply voltage: 5 x 1V > Max current average over 1 second: 1 x 100mA > Max current average over 10 ms: 1.2 x 100mA > Power down supply current: 2.5 x 10mA > Card decodes 4 address lines, full 8/16 Bit I/O > IRQ modes: Level, Pulse > IRQ level = 4 > Tuple #6, code = 0x1b (Configuration entry), length = 5 > 000: 83 01 08 65 ff > Config index = 0x3 > Interface byte = 0x1 (I/O) > Card decodes 5 address lines, full 8/16 Bit I/O > Tuple #7, code = 0x20 (Manufacturer ID), length = 4 > 000: 28 01 03 01 > PCMCIA ID = 0x128, OEM ID = 0x103 > Tuple #8, code = 0x14 (No link), length = 0 > Tuple #9, code = 0xff (Terminator), length = 0 > 1 slots found > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.KSI2mu3.10004191606390.9645-100000>