From owner-freebsd-hardware Fri Jun 7 12:54:38 1996 Return-Path: owner-hardware Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id MAA16089 for hardware-outgoing; Fri, 7 Jun 1996 12:54:38 -0700 (PDT) Received: from MindBender.HeadCandy.com (root@[199.238.225.168]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id MAA16082; Fri, 7 Jun 1996 12:54:31 -0700 (PDT) Received: from localhost.HeadCandy.com (michaelv@localhost.HeadCandy.com [127.0.0.1]) by MindBender.HeadCandy.com (8.7.5/8.6.9) with SMTP id MAA12779; Fri, 7 Jun 1996 12:50:21 -0700 (PDT) Message-Id: <199606071950.MAA12779@MindBender.HeadCandy.com> X-Authentication-Warning: MindBender.HeadCandy.com: Host michaelv@localhost.HeadCandy.com [127.0.0.1] didn't use HELO protocol To: "Rodney W. Grimes" cc: gpalmer@freebsd.org, dave@persprog.com, questions@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: Which dual Pentium motherboard? Cyrix SMP? In-reply-to: Your message of Fri, 07 Jun 96 12:42:02 -0700. <199606071942.MAA11811@GndRsh.aac.dev.com> Date: Fri, 07 Jun 1996 12:50:10 -0700 From: "Michael L. VanLoon -- HeadCandy.com" Sender: owner-hardware@freebsd.org X-Loop: FreeBSD.org Precedence: bulk >> >David Alderman wrote in message ID >> ><26C84A7DC0@novell.persprog.com>: >> >> Moral of the story: EISA/PCI is fine as long as the floppy controller is >> >> on the motherboard. >> >Umm. You must have had a weird card. The Adaptec 1742 (for example) >> >has onboard floppy, is an EISA card, and works under FreeBSD. As I >> The floppy on my BusLogic BT747s also works great under NetBSD on my >> 486-based EISA system. Are you specifically saying that something >> specific to a PCI/EISA bus breaks EISA-based floppy controllers? >> Because, I haven't seen any problems in a strictly EISA system. >The problem is that if you take a brand new EISA motherboard out of the >box, plug a 1742 or BT747 or any other EISA card with the floppy controller >on it you can not boot from the floppy since the EISA card containing the >controller has not been configured into the EISA conf structures, and thus >by default the board will be disabled until you configure it. Ah, not true! :-) At least in the case of the BusLogic cards... There is a jumper at the top of the card that will enable the card's floppy controller even if it isn't "configured" yet. Normally, you'd leave this jumper off and just configure the thing in the EISA config utility. But if you're in the situation you just described, you can short that jumper and the floppy controller will work, regardless. ----------------------------------------------------------------------------- Michael L. VanLoon michaelv@HeadCandy.com --< Free your mind and your machine -- NetBSD free un*x >-- NetBSD working ports: 386+PC, Mac 68k, Amiga, Atari 68k, HP300, Sun3, Sun4/4c/4m, DEC MIPS, DEC Alpha, PC532, VAX, MVME68k, arm32... NetBSD ports in progress: PICA, others... Roll your own Internet access -- Seattle People's Internet cooperative. If you're in the Seattle area, ask me how. -----------------------------------------------------------------------------