Date: Tue, 23 Oct 2012 21:02:05 -0700 From: Nick Triantos <nick@triantos.com> To: freebsd-scsi@freebsd.org Subject: isp driver crashing on 9.0 Message-ID: <5D848E87-4C36-44D9-A5FA-57DD8B82F806@triantos.com>
next in thread | raw e-mail | index | archive | help
Hi, I've been happily using 8.3 on an old system, with a fiber channel SAN = connected through a Qlogic QLA2200 card. All's been working well, but = when I updated to FreeBSD 9.0, I'm now getting crashes in the isp driver = at boot. I mostly wanted to understand whether this is still a supported = configuration. If not, I'd suggest someone remove the hardware from the = supported hardware list. The errors I see at boot are below. Any advice welcome. thanks! -Nick ... ZFS filesystem version 5 ZFS storage pool version 28 isp0: Internal Firmware Error on bus 0 @ RISC Address 0x16e5 isp0: isp_reinit: cannot reset card isp0: unknown isp_async event 14 isp0: Polled Mailbox Command (0x60) Timeout (30000000us) started = it:1709) isp0: Mailbox Command 'INIT FIRMWARE' failed (TIMEOUT) isp0: isp_fibre_init: isp0: 0x00000000: 01 00 07 a5 00 08 00 01 5a 00 3c 01 21 00 00 00 isp0: 0x00000010: 8b 01 08 d7 7d 00 00 1e 00 00 00 00 00 00 00 00 isp0: 0x00000020: 00 00 00 00 00 04 00 01 00 00 96 d3 00 00 00 00 isp0: 0x00000030: 00 00 97 d3 00 00 00 00 00 00 00 00 b4 00 00 00 isp0: 0x00000040: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 isp0: 0x00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5D848E87-4C36-44D9-A5FA-57DD8B82F806>