From owner-freebsd-sparc64@FreeBSD.ORG Wed Nov 24 14:43:19 2004 Return-Path: Delivered-To: freebsd-sparc64@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B1BFB16A4CE for ; Wed, 24 Nov 2004 14:43:19 +0000 (GMT) Received: from callahan.capri.pl (callahan.capri.pl [217.149.242.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8BC2343D49 for ; Wed, 24 Nov 2004 14:43:18 +0000 (GMT) (envelope-from mk@capri.pl) Received: from cpr159.neoplus.adsl.tpnet.pl (cpr159.neoplus.adsl.tpnet.pl [83.31.223.159]) (authenticated bits=0) by callahan.capri.pl (8.12.9p2/8.12.9) with ESMTP id iAOEhFfS044246 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO) for ; Wed, 24 Nov 2004 15:43:15 +0100 (CET) (envelope-from mk@capri.pl) Date: Wed, 24 Nov 2004 15:46:22 +0100 (CET) From: mk@capri.pl X-X-Sender: mk@grendel.oldford.pl To: freebsd-sparc64@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Subject: 5.3 on ultra2: scsi disk not detected X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Michal Konieczny List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 24 Nov 2004 14:43:19 -0000 First of all, congratulations for bringing FreeBSD to ultra2 ! Great job. I encountered few problems during installation. Till now my ultra2 ran SunOS 5.8 only, from IBM DRVS09D 9GB disk. I wanted to keep this Solaris install, so for FreeBSD install, I put second trial disk: IBM DORS32160 (2160MB) and started installation. After boot from CDROM selection menu appears with several terminal option selections, but they all are unusable - this problem is already known on this list. Output problems are understandable, but keyboard input is totally unreliable, quite strange for locally attached device. So I disconnect the keyboard and connect the terminal emulator to ttya. Both disks and cdrom are visible - here is probe-scsi output: Sun Ultra 2 UPA/SBus (2 X UltraSPARC 168MHz), No Keyboard OpenBoot 3.25, 512 MB memory installed, Serial #8416406. Ethernet address 8:0:20:80:6c:96, Host ID: 80806c96. {0} ok probe-scsi Target 0 Unit 0 Disk IBM DRVS09D 037013600063QARSPKT037 09RI0002400012209L1492 E32057 Q09L1438B06 E32044 2000 Target 1 Unit 0 Disk IBM DORS32160SUN2.1GWA7A96262Q2011 0933 000116 46H6081 07H1118 Target 6 Unit 0 Removable Read Only device TEAC CD-ROM CD-532S 3.0A Time for booting install CDROM. Unfortunatelly FreeBSD kernel doesn't detect disk with Solaris (target 0), only the second disk (scsi target 1), as device da0: Boot device: /sbus/SUNW,fas@e,8800000/sd@6,0:f File and args: >> FreeBSD/sparc64 boot block Boot path: /sbus@1f,0/SUNW,fas@e,8800000/sd@6,0:f Boot loader: /boot/loader Console: Open Firmware console Boot path set to /sbus@1f,0/SUNW,fas@e,8800000/sd@6,0:a FreeBSD/sparc64 bootstrap loader, Revision 1.0 (root@bobbi.cse.buffalo.edu, Fri Nov 5 02:16:10 UTC 2004) bootpath="/sbus@1f,0/SUNW,fas@e,8800000/sd@6,0:a" Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x3b5f08+0x49e28 syms=[0x8+0x4ef60+0x8+0x43746] | Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... nothing to autoload yet. jumping to kernel entry at 0xc0040000. stray vector interrupt 2033 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Fri Nov 5 19:30:40 UTC 2004 root@bobbi.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC real memory = 536870912 (512 MB) avail memory = 506355712 (482 MB) cpu0: Sun Microsystems UltraSparc-I Processor (168.00 MHz CPU) cpu1: Sun Microsystems UltraSparc-I Processor (168.00 MHz CPU) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs nexus0: sbus0: clock 25.000 MHz sbus dvma: DVMA map: 0xfc000000 to 0xffffffff sbus0: [FAST] sbus0: [FAST] initializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz quality 100 sbus0: on nexus0 sbus0: , type (unknown) (no driver attached) sbus0: , type (unknown) (no driver attached) sbus0: , type (unknown) (no driver attached) sbus0: , type block (no driver attached) eeprom0: mem 0x1200000-0x1201fff on sbus0 eeprom0: model mk48t59 eeprom0: mk48txx_attach: battery low eeprom0: Can't attach mk48t59 tod clockdevice_attach: eeprom0 attach returned 6 zs0: mem 0x1100000-0x1100003 irq 2024 on sbus0 zs0: [FAST] zstty0: on zs0 zstty0: console 9600,8,n,1,- zstty1: on zs0 sbus0: , type serial (no driver attached) sbus0: , type (unknown) (no driver attached) sbus0: , type (unknown) (no driver attached) esp0: mem 0x8810000-0x881003f,0x8800000-0x880000f irq 2016 on sbus0 esp0: [GIANT-LOCKED] esp0: FAS366/HME, 40MHz, SCSI ID 7 hme0: mem 0x8c07000-0x8c0701f,0x8c06000-0x8c07fff,0x8c04000-0x8c05fff,0x8c02000-0x8c03fff,0x8c00000-0x8c00107 irq 2017 on sbus0 miibus0: on hme0 nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: Ethernet address: 08:00:20:80:6c:96 hme0: if_start running deferred for Giant hme0: [GIANT-LOCKED] sbus0: , type (unknown) (no driver attached) sbus0: , type display (no driver attached) Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle md0: Preloaded image 4194304 bytes at 0xc04923e8 esp0: SCSI bus parity error esp0: !TC on DATA XFER [intr 10, stat 86, step 4] prevphase 1, resid 24 esp0: SCSI bus parity error esp0: !TC on DATA XFER [intr 10, stat 86, step 4] prevphase 1, resid 20 (probe0:esp0:0:0:0): AutoSense Failed SMP: AP CPU #1 Launched! cd0 at esp0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: cd present [310886 x 2048 byte records] da0 at esp0 bus 0 target 1 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) Mounting root from ufs:/dev/md0 After settling SCSI devices, SCSI parity errors appear, only second disk is detected as da0, first disk gets unnoticed. On the hardware side, everything seems to be ok, disks are sca, so no problems with scsi cable and termination. Solaris doesn't see any problems, detects both disks: Boot device: /sbus/SUNW,fas@e,8800000/sd@0,0 File and args: -v Size: 338848+89946+75918 Bytes SunOS Release 5.8 Version Generic_108528-11 64-bit Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved. Ethernet address = 8:0:20:80:6c:96 mem = 524288K (0x20000000) avail mem = 510091264 root nexus = Sun Ultra 2 UPA/SBus (2 X UltraSPARC 168MHz) sbus0 at root: UPA 0x1f 0x0 ... sbus0 is /sbus@1f,0 /sbus@1f,0/SUNW,fas@e,8800000 (fas0): rev 2.2 FEPS chip fas0 at sbus0: SBus0 slot 0xe offset 0x8800000 and slot 0xe offset 0x8810000 Onboard device sparc9 ipl 4 fas0 is /sbus@1f,0/SUNW,fas@e,8800000 sd0 at fas0: target 0 lun 0 sd0 is /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0 sd1 at fas0: target 1 lun 0 sd1 is /sbus@1f,0/SUNW,fas@e,8800000/sd@1,0 sd6 at fas0: target 6 lun 0 sd6 is /sbus@1f,0/SUNW,fas@e,8800000/sd@6,0 root on /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0:a fstype ufs zs0 at sbus0: SBus0 slot 0xf offset 0x1100000 Onboard device sparc9 ipl 12 zs0 is /sbus@1f,0/zs@f,1100000 zs1 at sbus0: SBus0 slot 0xf offset 0x1000000 Onboard device sparc9 ipl 12 zs1 is /sbus@1f,0/zs@f,1000000 cpu0: SUNW,UltraSPARC (upaid 0 impl 0x10 ver 0x40 clock 168 MHz) cpu1: SUNW,UltraSPARC (upaid 1 impl 0x10 ver 0x40 clock 168 MHz) SUNW,hme0 : Sbus (Rev Id = 22) Found hme0 at sbus0: SBus0 slot 0xe offset 0x8c00000 and slot 0xe offset 0x8c02000 and slot 0xe offset 0x8c04000 and slot 0xe offset 0x8c06000 and slot 0xe offset 0x8c07000 Onboard device sparc9 ipl 6 hme0 is /sbus@1f,0/SUNW,hme@e,8c00000 configuring IPv4 interfaces: hme0. Hostname: ultra2 dump on /dev/dsk/c0t0d0s1 size 512 MB SUNW,hme0 : Internal Transceiver Selected. SUNW,hme0 : Auto-Negotiated 100 Mbps Full-Duplex Link Up pseudo-device: devinfo0 devinfo0 is /pseudo/devinfo@0 The system is coming up. Please wait. Both sd0 and sd1 get detected with no problems. So now I took out the second disk, leaving target 0 with Solaris - the same results: parity error and no disk detection: [...] Waiting 15 seconds for SCSI devices to settle md0: Preloaded image 4194304 bytes at 0xc04923e8 esp0: SCSI bus parity error esp0: !TC on DATA XFER [intr 10, stat 86, step 4] prevphase 1, resid 24 esp0: SCSI bus parity error esp0: !TC on DATA XFER [intr 10, stat 86, step 4] prevphase 1, resid 20 (probe0:esp0:0:0:0): AutoSense Failed SMP: AP CPU #1 Launched! cd0 at esp0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: cd present [310886 x 2048 byte records] Mounting root from ufs:/dev/md0 Now the second disk as the only disk: [...] Waiting 15 seconds for SCSI devices to settle md0: Preloaded image 4194304 bytes at 0xc04923e8 SMP: AP CPU #1 Launched! cd0 at esp0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: cd present [310886 x 2048 byte records] da0 at esp0 bus 0 target 1 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) Mounting root from ufs:/dev/md0 Much better - no parity errors and disk gets detected. But it got detected also with the first disk installed. I tried all combinations swapping disks between both trays, but results are always the same. I've seen here few problem reports with no disk detection, the hint was to clear starting sectors of the disk to mess the disk label - but I really want to keep this Solaris install, is this the "feature" of FreeBSD to give up with this disk, or is it real hardware problem ? The latter is not so convincing, because Solaris boots with no complaints and sees both disks. Best regards, -- Michal Konieczny mk@capri.pl