Date: Wed, 08 Feb 2006 15:51:44 -0500 From: "Bill Schmitt (SW)" <software@schmittnet.com> To: mark.jacobs@custserv.com Cc: questions@freebsd.org Subject: Re: showdown transfering files with scp Message-ID: <43EA59E0.3050002@schmittnet.com> In-Reply-To: <7867115D33789747BE4994F8700BB5862AB0F6@tmpmailmb02.enterprise.corpad.timeinc.com> References: <7867115D33789747BE4994F8700BB5862AB0F6@tmpmailmb02.enterprise.corpad.timeinc.com>
next in thread | previous in thread | raw e-mail | index | archive | help
mark.jacobs@custserv.com wrote: >I was using scp to copy several large (300-800mb) each files between two >Freebsd machines. Both are on the same hub, 100MB Ethernet connection. >The source box is FreeBSD 5.4 stable at a late October build date. The >target is running 6.0 stable at a current build date. > > > >The first three files showed a transfer rate of about 3mb/sec and >transfer took about a 5-7 minutes for each file. After the third one >however the transfer rate dropped to 100-200 KB/sec. There was nothing >else going on in the internal network at the time. > > > >Any ideas on what happened? > > > >Mark Jacobs > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > > > I can't be sure if it's the issue, but at one point some individuals on the network where I worked installed hubs of their own (the non-intelligent variety of connection) and it didn't just slow them down, it dragged down the entire network segment. Since hubs are not intelligent, there are an awful lot of collisions and putting a hub downstream from the routers means that all bets are off on performance. Hope that helps.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43EA59E0.3050002>