Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 13 Aug 2001 22:42:58 +0300 (EEST)
From:      Olexander Kunytsa <kunia@istc.kiev.ua>
To:        <stable@freebsd.org>
Subject:   USB Media reader problem
Message-ID:  <Pine.LNX.4.33.0108132207530.17414-100000@wolf.istc.kiev.ua>

next in thread | raw e-mail | index | archive | help


			Hello!

	I've got the Diva Mp3 Player with USB interface. The player has
function Win2k recognizes
it as 'USB Mass storage device' and sets it as general 'Removable disk'
with FAT filesystem.
	Then I've tried to connect my Mp3 Player from my FreeBSD
4.3-Stable.  There is a dmesg while booting with the player:

_____________________________
FreeBSD 4.4-PRERELEASE #3: Mon Aug 13 21:01:37 EEST 2001
...
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Philips product 0x1801, rev 1.00/1.00, addr 2
umass0: Get Max Lun not supported (STALLED)
....
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <DIVA USB Media Reader 2.06> Removable Direct Access SCSI-0 device
da0: 650KB/s transfers
da0: 62MB (127232 512 byte sectors: 64H 32S/T 62C)
...


	But I failed to do anything with this device!:( I've tried
'mount_msdos /dev/da0', 'mount_msdos /dev/da0s1' and even 'hd /dev/da0',
and have got such error message:
_____________________________
umass0: Phase Error, residue = 0
umass0: BBB reset failed, STALLED
umass0: Phase Error, residue = 0
umass0: BBB reset failed, STALLED
umass0: Phase Error, residue = 0
umass0: BBB reset failed, STALLED
umass0: Phase Error, residue = 0
umass0: BBB reset failed, STALLED
umass0: Phase Error, residue = 0
umass0: BBB reset failed, STALLED
da0: reading primary partition table: error reading fsbn 0



	After disconnecting and reconecting I've got message on console:
__________________________________________________
umass0: at uhub0 port 2 (addr 2) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
uhub0: device problem, disabling port 2
---------------------------------------------------
and no action can be done with it:(

	Can I hope of enabling my player/Flash_card_reader on FreeBSD?

					Olexander


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.33.0108132207530.17414-100000>