Date: Wed, 9 Jul 1997 21:45:41 -0400 (EDT) From: Bernie Doehner <bad@uhf.wireless.net> To: Randall Hopper <rhh@ct.picker.com> Cc: Volker Freiburg <volker@neuroinformatik.ruhr-uni-bochum.de>, multimedia@FreeBSD.ORG Subject: Re: Dual PPro & Bt848 Message-ID: <Pine.BSF.3.95.970709212624.560B-100000@uhf.wdc.net> In-Reply-To: <19970709211636.38582@ct.picker.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> |Actualy mine is EDO based.. But I still have a few problems.. Mostly: > > Oh, so you have the Stealth 3D 2000 Pro? Seems like that's the Virge/DX, > isn't it? Can't check right now, but that sounds familiar (the DX part). > |1. Flicker - (new problem). Now I have pretty bad flicker in X. Don't > |really understand it because I think the refresh rate is 85 Hz. and I am > |not interlaced and not exceeding the monitor specs. > > Hmmm. Is this just in the TV window or is this the whole screen? latter.. Unfortunately. > If the former, > does it happen when you -disableDirectV? > If the latter, > 1) does this happen all the time or just when the TV is on? All the time. > 2) does xvidtune confirm 85Hz? Learn something new every day (ever think about teaching a class in configuring X windows ?). It's actualy 75.94 Hz., Horizontal Sync 62.5 kHz, Pixel Clock: 85 MHz. This is within the monitor's spec. > 3) you said you checked, but might double-check that it's not 42.5Hz > interlaced you're seeing. I guess not.. Although it reminds me of my Amiga's 640x480 interlaced screen. > |2. Wincast will still ocasionaly hangs with IDE timeouts. By far not as > |bad as before, but still happens.. BUT, I discovered something that might > |have been causing me problems. I was IRQ sharing between my ethernet and > |video card. I am trying to get a Digiboard so that I can free up some of > |my IRQ's. > > Nuts, from your previous comments I thought we had that licked on your 486. Yea.. well, only if you run at maximum resolution for very long time.. Like 60 minutes, which I don't routinely do. Also I discovered that in the past (before I shoved the cards around), the PCI network card and S3 Virge card were sharing an interrupt. I am not sure if interrupts are even used in DMA on the PC.. I didn't think so, but I am not a PC programmer. I just know that on my Hitachi boards the DMA controller can generate an end of transfer interrupt. Also, I currently have no video.. Audio only, but I probably screwed something up in the recently reorganization. > Well, at least you can do ximages and the CPU load isn't heavy anymore. Yes, and full screen res is stable (with the exception of the rare hangs). > As > Amancio's mentioned, this sounds like a MB chipset issue. Since the > Windoze S/W works for you, there's evidently something that can be done, > but it might be a difficult find. It's interesting though that all the > Pentium+ MBs don't see this particular problem. > You are talking to/about Volker here. No windows loaded here. Bernie
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95.970709212624.560B-100000>