From owner-freebsd-current@FreeBSD.ORG Thu Aug 28 04:38:15 2003 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8422316A4BF for ; Thu, 28 Aug 2003 04:38:15 -0700 (PDT) Received: from mail.gmx.net (mail.gmx.de [213.165.64.20]) by mx1.FreeBSD.org (Postfix) with SMTP id 5149C43FA3 for ; Thu, 28 Aug 2003 04:38:12 -0700 (PDT) (envelope-from pilkis@gmx.net) Received: (qmail 17463 invoked by uid 65534); 28 Aug 2003 11:38:08 -0000 Received: from unknown (EHLO pilkisnotexp) (62.68.42.70) by mail.gmx.net (mp013) with SMTP; 28 Aug 2003 13:38:08 +0200 Message-ID: <136801c36d58$d9f186a0$0464a8c0@spotripoli.local> From: "Putinas" To: Date: Thu, 28 Aug 2003 13:38:03 +0200 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_1361_01C36D69.9B140500" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.3790.0 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0 X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: Sil3112 dma errors X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 28 Aug 2003 11:38:15 -0000 This is a multi-part message in MIME format. ------=_NextPart_000_1361_01C36D69.9B140500 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Hi all, recently I upgraded my kernel to the last version ( Aug 28 now, before was runing Aug 5 version ), and I startet to get error like this: Aug 27 17:03:23 pilkishome kernel: ad4: WARNING - WRITE_DMA recovered from missing interrupt Aug 27 17:03:23 pilkishome kernel: ad4: WARNING - WRITE_DMA soft error (ECC corrected)ad4: FAILURE - WRITE_DMA status=ff error=0... ad4: WARNING - WRITE_DMA recovery from missing interupt ad4: timeout sending command=ca ad4: error issuing DMA command after where is coming dma timeout, but in the syslog already nothing, system becomes unresponsible here is my uname and dmesg FreeBSD pilkishome.spo-tripoli.local 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Thu Aug 28 14:37:53 EEST 2003 root@:/usr/obj/usr/src/sys/GENERIC i386 upport enabled npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=255d8086) pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00f2320 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 6 1 0 A 0x60 3 4 5 7 9 10 11 12 slot 6 1 0 B 0x61 3 4 5 7 9 10 11 12 embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 slot 1 2 0 A 0x69 3 4 5 7 9 10 11 12 slot 1 2 0 B 0x6a 3 4 5 7 9 10 11 12 slot 1 2 0 C 0x6b 3 4 5 7 9 10 11 12 slot 1 2 0 D 0x68 3 4 5 7 9 10 11 12 slot 2 2 1 A 0x6a 3 4 5 7 9 10 11 12 slot 2 2 1 B 0x6b 3 4 5 7 9 10 11 12 slot 2 2 1 C 0x68 3 4 5 7 9 10 11 12 slot 2 2 1 D 0x69 3 4 5 7 9 10 11 12 slot 3 2 2 A 0x6b 3 4 5 7 9 10 11 12 slot 3 2 2 B 0x68 3 4 5 7 9 10 11 12 slot 3 2 2 C 0x69 3 4 5 7 9 10 11 12 slot 3 2 2 D 0x6a 3 4 5 7 9 10 11 12 slot 4 2 6 A 0x68 3 4 5 7 9 10 11 12 slot 4 2 6 B 0x69 3 4 5 7 9 10 11 12 slot 4 2 6 C 0x6a 3 4 5 7 9 10 11 12 slot 4 2 6 D 0x6b 3 4 5 7 9 10 11 12 slot 5 2 7 A 0x62 3 4 5 7 9 10 11 12 slot 5 2 7 B 0x63 3 4 5 7 9 10 11 12 slot 5 2 7 C 0x60 3 4 5 7 9 10 11 12 slot 5 2 7 D 0x61 3 4 5 7 9 10 11 12 embedded 2 5 A 0x62 3 4 5 7 9 10 11 12 embedded 2 3 A 0x61 3 4 5 7 9 10 11 12 embedded 2 4 A 0x69 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks BAD min = 3, max = 1060, width = 1057 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks BAD min = 3, max = 1055, width = 1052 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks BAD min = 3, max = 1055, width = 1052 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks BAD min = 3, max = 1055, width = 1052 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks BAD min = 3, max = 1052, width = 1049 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: on acpi0 acpi_cpu1: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.1 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.1 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x255d, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0046, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2551, revid=0x03 bus=0, slot=0, func=1 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f4000000, size 26, enabled found-> vendor=0x8086, dev=0x2552, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d800, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x24c2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000d400, size 5, enabled pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD) pcib0: slot 29 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x24c4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type 4, range 32, base 0000d000, size 5, enabled pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC) pcib0: slot 29 INTC is routed to irq 5 found-> vendor=0x8086, dev=0x24c7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[10]: type 1, range 32, base ed800000, size 10, enabled pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH) pcib0: slot 29 INTD is routed to irq 9 found-> vendor=0x8086, dev=0x24cd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0x82 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns) found-> vendor=0x8086, dev=0x24c0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00000000, size 3, enabled map[14]: type 4, range 32, base 00000000, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 0000f000, size 4, enabled pcib0: matched entry for 0.31.INTA (source \\_SB_.LNKC) pcib0: slot 31 INTA is routed to irq 5 found-> vendor=0x8086, dev=0x24cb, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 agp0: mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pci0: at device 0.1 (no driver attached) pcib1: mem 0xf4000000-0xf7ffffff at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xee000000-0xefdfffff pcib1: prefetched decode 0xeff00000-0xf3ffffff ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.1 pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base ee000000, size 24, enabled map[14]: type 3, range 32, base f0000000, size 26, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x10de, dev=0x0281, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) uhci0: port 0xd800-0xd81f irq 11 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.21, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. ukbd0: SILITEK USB Keyboard and Mouse, rev 1.00/1.20, addr 3, iclass 3/1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 ums1: SILITEK USB Keyboard and Mouse, rev 1.00/1.20, addr 3, iclass 3/0 ums1: 3 buttons and Z dir. uhci1: port 0xd400-0xd41f irq 9 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd000-0xd01f irq 5 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib2: at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x9000-0xbfff pcib2: memory decode 0xeb800000-0xed7fffff pcib2: prefetched decode 0xefe00000-0xefefffff ---- initial configuration ------------------------ \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.0 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.3 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.0 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.1 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.2 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.3 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.0 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.1 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.2 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.1 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.5.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.3.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.4.0 ---- before setting priority for links ------------ \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1440 1440 840 1440 1440 2040 840 740 1440 10440 10440 references: 4 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1440 1440 840 1440 1440 2040 840 740 1440 10440 10440 references: 4 priority: 11832 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.0 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.3 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.0 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.1 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.2 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.3 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.0 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.1 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.2 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.1 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.5.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.3.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.4.0 pci2: on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000b800, size 5, enabled pcib2: matched entry for 2.2.INTA (source \\_SB_.LNKH) pcib2: slot 2 INTA is routed to irq 9 found-> vendor=0x1102, dev=0x0002, revid=0x07 bus=2, slot=2, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=9 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000b400, size 3, enabled found-> vendor=0x1102, dev=0x7002, revid=0x07 bus=2, slot=2, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ed000000, size 11, enabled map[14]: type 1, range 32, base ec800000, size 14, enabled pcib2: matched entry for 2.3.INTA (source \\_SB_.LNKB) pcib2: slot 3 INTA is routed to irq 10 found-> vendor=0x104c, dev=0x8023, revid=0x00 bus=2, slot=3, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000b000, size 3, enabled map[14]: type 4, range 32, base 0000a800, size 2, enabled map[18]: type 4, range 32, base 0000a400, size 3, enabled map[1c]: type 4, range 32, base 0000a000, size 2, enabled map[20]: type 4, range 32, base 00009800, size 4, enabled map[24]: type 1, range 32, base ec000000, size 9, enabled pcib2: matched entry for 2.4.INTA (source \\_SB_.LNKF) pcib2: slot 4 INTA is routed to irq 9 found-> vendor=0x1095, dev=0x3112, revid=0x02 bus=2, slot=4, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 64, base eb800000, size 16, enabled pcib2: matched entry for 2.5.INTA (source \\_SB_.LNKC) pcib2: slot 5 INTA is routed to irq 5 found-> vendor=0x14e4, dev=0x16a6, revid=0x02 bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00009400, size 7, enabled pcib2: matched entry for 2.6.INTA (source \\_SB_.LNKE) pcib2: slot 6 INTA is routed to irq 9 found-> vendor=0x1022, dev=0x2020, revid=0x10 bus=2, slot=6, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0085, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=9 pci2: at device 2.0 (no driver attached) pci2: