Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 6 Oct 1999 11:35:36 +0100 (MET)
From:      Luigi Rizzo <luigi@labinfo.iet.unipi.it>
To:        sarikaya@u-aizu.ac.jp (Behcet Sarikaya)
Cc:        luigi@iet.unipi.it, freebsd-questions@FreeBSD.org
Subject:   Re: Sound Card pcm driver config problem
Message-ID:  <199910061035.LAA12703@labinfo.iet.unipi.it>
In-Reply-To: <37FB0E76.8F45ADDD@u-aizu.ac.jp> from "Behcet Sarikaya" at Oct 6, 99 05:55:00 pm

next in thread | previous in thread | raw e-mail | index | archive | help
"sounds" as a dma problem. I would check your system to make sure that
other peripherals (e.g. the parallel port) are not using DRQ1, and also
the bios setting to make sure that DRQ1 and 3 are assigned to the PnP
card(s).

	cheers
	luigi

interrupt line, and also 
"> 
> I am using the pcm driver to configure my Crystal CS4237 card. I can not
> play CD.
> I did
> /dev/MAKEDEV snd2
> When I do
> cat monkey.au >/dev/audio
> I got it played two times and then sometimes it stops with this message:
> 
> timeout flushing dbuf_out, chan 1 cnt 0xffeb8e48 flags 0x000002c1
>   Applications like rat recognize CS4237 but no sound.
> Thanks for your help in advance,
> 
> / Behcet Sarikaya
> 
> Kernel configuration file:
> 
> controller pnp0
> 
> device     pcm1 at isa ? port? tty irq 5 drq 1 flags 0x13 vector pcmintr
> 
> dmesg output:
> 
> FreeBSD 3.2-RELEASE #19: Wed Oct  6 16:23:21 JST 1999
>     sarikaya@dellcom5.u-aizu.ac.jp:/usr/project/V6/sys/compile/DELLCOM5
> 
> FreeBSD Kernel Configuration Utility - Version 1.2
>  Type "help" for help or "visual" to go to the visual
>  configuration interface (requires MGA/VGA display or
>  serial terminal capable of displaying ANSI graphics).
> config> pnp 1 0 os enable port0 0x534 port2 0x220 irq0 5 drq0 1 drq1 3
> config> quit
> Probing for PnP devices:
> CSN 1 Vendor ID: CSCd937 [0x37d9630e] Serial 0xffffffff Comp ID: @@@0000 [0x0000
> 0000]
> mss_attach <CS4237>2 at 0x530 irq 5 dma 1:3 flags 0x13
> pcm2 (CS423x/Yamaha/AD1816 <CS4237> sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 fl
> ags 0x13 on isa
> 
> pnpinfo command output:Checking for Plug-n-Play devices...
> 
> Card assigned CSN #1
> Vendor ID CSCd937 (0x37d9630e), Serial Number 0xffffffff
> PnP Version 1.0, Vendor Version 1
> Device Description: AW35/Pro (Resource R2.2-D7)
> 
> Logical Device ID: CSC0000 0x0000630e #0
> Device Description: WSS/SB
> TAG Start DF
> Good Configuration
>     DMA: channel(s) 1
>         8-bit, not a bus master, count by byte, , Type A
>     DMA: channel(s) 0 3
>         8-bit, not a bus master, count by byte, , Type A
>     IRQ: 5  - only one type (true/edge)
>     I/O Range 0x534 .. 0x534, alignment 0x4, len 0x4
>         [16-bit addr]
>     I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8
>         [16-bit addr]
>     I/O Range 0x220 .. 0x220, alignment 0x20, len 0x10
>         [16-bit addr]
> Acceptable Configuration
>     DMA: channel(s) 1 3
>         8-bit, not a bus master, count by byte, , Type A
>     DMA: channel(s) 0 1 3
>         8-bit, not a bus master, count by byte, , Type A
>     IRQ: 5 7 9 11 12 15  - only one type (true/edge)
>     I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
>         [16-bit addr]
>     I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8
>         [16-bit addr]
>     I/O Range 0x220 .. 0x260, alignment 0x20, len 0x10
>         [16-bit addr]
> TAG Start DF
> Sub-optimal Configuration
>     DMA: channel(s) 0 1 3
>         8-bit, not a bus master, count by byte, , Type A
>     IRQ: 5 7 9 11 12 15  - only one type (true/edge)
>     I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
>         [16-bit addr]
>     I/O Range 0x388 .. 0x3f8, alignment 0x8, len 0x8
>         [16-bit addr]
>     I/O Range 0x220 .. 0x300, alignment 0x20, len 0x10
>         [16-bit addr]
> TAG End DF
> 
> Logical Device ID: CSC0001 0x0100630e #1
> Device Description: GAME
> TAG Start DF
> Good Configuration
>     I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8
>         [16-bit addr]
> TAG Start DF
> Acceptable Configuration
>     I/O Range 0x208 .. 0x208, alignment 0x8, len 0x8
>         [16-bit addr]
> TAG End DF
> 
> Logical Device ID: CSC0010 0x1000630e #2
> Device Description: CTRL
>     I/O Range 0x120 .. 0xff8, alignment 0x8, len 0x8
>         [16-bit addr]
> 
> Logical Device ID: CSC0003 0x0300630e #3
> Device Description: MPU
> TAG Start DF
> Good Configuration    IRQ: 9  - only one type (true/edge)
>     I/O Range 0x330 .. 0x330, alignment 0x8, len 0x2
>         [16-bit addr]
> TAG Start DF
> Acceptable Configuration
>     IRQ: 9 11 12 15  - only one type (true/edge)
>     I/O Range 0x330 .. 0x360, alignment 0x8, len 0x2
>         [16-bit addr]
> TAG Start DF
> Sub-optimal Configuration
>     I/O Range 0x330 .. 0x3e0, alignment 0x8, len 0x2
>         [16-bit addr]
> TAG End DF
> End Tag
> 
> Successfully got 46 resources, 4 logical fdevs
> -- card select # 0x0001
> 
> CSN CSCd937 (0x37d9630e), Serial Number 0xffffffff
> 
> Logical device #0
> IO:  0x0534 0x0000 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 5 0
> DMA 1 3
> IO range check 0x00 activate 0x01
> 
> Logical device #1
> IO:  0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 0 0
> DMA 4 4
> IO range check 0x00 activate 0x00
> 
> Logical device #2
> IO:  0x0120 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 0 0
> DMA 4 4
> IO range check 0x00 activate 0x01
> 
> Logical device #3
> IO:  0x0338 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 11 0
> DMA 4 4
> IO range check 0x00 activate 0x01
> 
> 
> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199910061035.LAA12703>