From owner-freebsd-questions  Sun Sep 21 18:25:31 1997
Return-Path: <owner-freebsd-questions>
Received: (from root@localhost)
          by hub.freebsd.org (8.8.7/8.8.7) id SAA00293
          for questions-outgoing; Sun, 21 Sep 1997 18:25:31 -0700 (PDT)
Received: from www.delanet.com (smtp@www.delanet.com [208.9.136.82])
          by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA00285
          for <freebsd-questions@FreeBSD.ORG>; Sun, 21 Sep 1997 18:25:25 -0700 (PDT)
Received: from rugose (modem75.delanet.com [208.17.58.138])
	by www.delanet.com (8.8.4/8.8.5) with ESMTP id VAA22143
	for <freebsd-questions@FreeBSD.ORG>; Sun, 21 Sep 1997 21:27:39 -0400 (EDT)
Message-Id: <199709220127.VAA22143@www.delanet.com>
From: "Stephen Comoletti" <rugose@www.delanet.com>
To: <freebsd-questions@FreeBSD.ORG>
Subject: Fw: New Install
Date: Sun, 21 Sep 1997 21:21:15 -0400
X-MSMail-Priority: Normal
X-Priority: 3
X-Mailer: Microsoft Internet Mail 4.70.1155
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-questions@FreeBSD.ORG
X-Loop: FreeBSD.org
Precedence: bulk

An update to the below information

Ultra33 IDE (seperate card) - irq 10 at FFF0 - FFF7
motherboard ide primary     - irq 14 at 01F0 - 01F7
motherboard ide secondary - irq 15 at 0170 - 0177

Boot floppy image from the 3.0 snap released on 9/20/97 detected the
Ultra33 on the correct irq, I could not see the i/o range. It still does
not detect the drive. It assumes
the motherboard primary ide as wdc0 (no devices attached to the primary at
all).
Does anyone have any idea what I need to change so that it looks at the
Ultra33 and not the primary motherboard ide?

Steve
----------
> From: Stephen Comoletti <rugose@www.delanet.com>
> To: freebsd-questions@FreeBSD.ORG
> Subject: New Install
> Date: Sunday, September 21, 1997 1:13 PM
> 
> I'm attempting to install a freebsd 2.2.2 from cd onto a new pc. My setup
> is as follows:
> 
> Pentium II/266
> 64 megs edo ram
> 6.4gig quntum fireball udma ide
> Promise Technology Ultra33 udma pci ide controller card
> iomega ditto easy
> iomega zip
> STB nitro 64 4meg pci 3d
> ensonique soundscape
> mitsumi 12/24x
> 
> The quantum is running of the ultra33 controller. The zip and cd are
> running off the secondary motherboard ide. 
> 
> I found that v2.2.2 does not support the ultra33 card, however a new snap
> 3.0 does.
> I still have the 2.2.2 cd. What do I need to do in order to complete an
> install? is the cd now useless to me and I need to complete the install
via
> ftp? Or can I use the new floppy image from the snap dir and install from
> the cd still?
> 
> I also am running win95 on my primary partition..my drive is setup with 2
> partitions, the primary and extended, with the extended split into 2
> logical drives. each drive has 2gigs assigned to it. Will there be any
> obvious problems with me installing this to the first logical drive in
the
> extended partition?
> 
> Thanks in advance,
> 
> Steve