From owner-freebsd-current  Sat May 27 19:45:36 1995
Return-Path: current-owner
Received: (from majordom@localhost)
          by freefall.cdrom.com (8.6.10/8.6.6) id TAA18925
          for current-outgoing; Sat, 27 May 1995 19:45:36 -0700
Received: from grep.cs.fsu.edu (grep.cs.fsu.edu [128.186.121.152])
          by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id TAA18915
          for <current@FreeBSD.org>; Sat, 27 May 1995 19:45:33 -0700
Received:  by grep.cs.fsu.edu (8.6.9/56)
	id WAA12315; Sat, 27 May 1995 22:45:30 -0400
From: Gang-Ryung Uh <uh@grep.cs.fsu.edu>
Message-Id: <199505280245.WAA12315@grep.cs.fsu.edu>
Subject: SoundBlaster 16
To: current@FreeBSD.org
Date: Sat, 27 May 1995 22:45:30 -0400 (EDT)
X-Mailer: ELM [version 2.4 PL24]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Length: 1044      
Sender: current-owner@FreeBSD.org
Precedence: bulk

Hi, all

I am running the FreeBSD-current(May 25). But I have a problem to
make my SoundBlaster 16 configured correctly by kernel.
        ---------------
The hardware setting for the audio interface is as follows,
base I/O address: 220H
Interrupt: 5
Low DMA channel: 1
High DMA channel: 6


So I change two things:

1) In the kernel configuration 

   # Controls all sound devices
   controller      snd0
   device sb0      at isa? port 0x220 irq 5 drq 1 vector sbintr
                                      ----- 

2) /usr/src/sys/i386/isa/sound/sound_config.h

#ifndef SBC_IRQ
#define SBC_IRQ         5       /* IQR7 is the factory default.  */
#endif                 ---

Then I config and rebuild the kernel. Following is the dmesg for the sb0:

        sb0 at 0x220 irq 5 drq 1 on isa
        sb0: <SoundBlaster Pro 4.13>
              ---------------------
              Is it different from SoundBlaster 16?

But if I do 'cat doh.au > /dev/audio', then there is no sound 
coming out!!!

Thanks for your help.

Regards,
uh

uh@cs.fsu.edu