Date: Wed, 7 May 2003 10:19:23 +0200 From: "Eddy Ramos" <e.ramos@deepground.com> To: <freebsd-questions@freebsd.org> Subject: 2 Major problems after fresh installation Message-ID: <002d01c31471$5e101c80$e20064c0@LAPTOP6>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_002E_01C31482.2198EC80 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hi there, I have used some Linux (Redhat, Suse) and UNIX (SCO) before, but I am relatively new to FreeBSD. I have 2 major problems after installing FreeBSD 4.8 on a PIII 866Mhz system (256 MB RAM). These are my problems, starting with the most important: 1) Can't get the network cards to work properly. I see something like 'couldn't map ports/memory' during startup. The machine is meant to be used as a router, so it has two network cards: 1. 3Com 3C905B-TX (uses IRQ 9 in Windows). I know this card is supported by FreeBSD (xl driver according to hardware list) 2. Realtek RTL8139 (uses IRX 10 in Windows). I know this card is supported by FreeBSD (rl driver according to hardware list) When I use /stand/sysinstall -> Configure -> Networking -> Interfaces I only see the parallel port (lp0) and the COM1 and COM2 devices. Furthermore I see 'faith0 <unknown network interface type>' that's it. Please have a look at the messages and the ifconfig output in order to see what is going wrong. 2) Xwindows (and KDE window manager) won't run. I have an Iiyama Vision Master monitor and an NVIDIA GeForce2 MX card (nv driver according to hardware list) 1. Yes, I have installed the X wrapper (installed as a dependency by default); 2. Yes, I have a raised security level (Raising kernel security level: kern.securelevel: -1 -> 2); 3. Yes, I have tried to 'startx' both as a user and as root; 4. Yes, I have tried both the 'xf86config' and the 'xf86cfg -textmode' tool to create the config file. Please have a look at the log files in order to see what is going wrong. Could anyone help me sorting this out? Thanks anyway, Eddy. ------=_NextPart_000_002E_01C31482.2198EC80 Content-Type: application/octet-stream; name="ifconfig.output" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="ifconfig.output" lp0: flags=3D8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500=0A= faith0: flags=3D8002<BROADCAST,MULTICAST> mtu 1500=0A= lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384=0A= inet6 ::1 prefixlen 128 =0A= inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 =0A= inet 127.0.0.1 netmask 0xff000000 =0A= ppp0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1500=0A= sl0: flags=3Dc010<POINTOPOINT,LINK2,MULTICAST> mtu 552=0A= ------=_NextPart_000_002E_01C31482.2198EC80 Content-Type: application/octet-stream; name="XFree86.8.log" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="XFree86.8.log" =0A= XFree86 Version 4.3.0=0A= Release Date: 27 February 2003=0A= X Protocol Version 11, Revision 0, Release 6.6=0A= Build Operating System: FreeBSD 4.8 i386 [ELF] =0A= Build Date: 23 March 2003=0A= Before reporting problems, check http://www.XFree86.Org/=0A= to make sure that you have the latest version.=0A= Module Loader present=0A= Markers: (--) probed, (**) from config file, (=3D=3D) default setting,=0A= (++) from command line, (!!) notice, (II) informational,=0A= (WW) warning, (EE) error, (NI) not implemented, (??) unknown.=0A= (=3D=3D) Log file: "/var/log/XFree86.8.log", Time: Fri May 2 16:31:09 = 2003=0A= (--) Using syscons driver with X support (version 2.0)=0A= (--) using VT number 9=0A= =0A= =0A= Fatal server error:=0A= xf86EnableIO: Failed to open /dev/io for extended I/O=0A= =0A= =0A= When reporting a problem related to a server crash, please send=0A= the full server output, not just the last messages.=0A= This can be found in the log file "/var/log/XFree86.8.log".=0A= Please report problems to xfree86@xfree86.org.=0A= =0A= ------=_NextPart_000_002E_01C31482.2198EC80 Content-Type: application/octet-stream; name="messages" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="messages" May 2 16:09:11 /kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A= May 2 16:09:11 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, = 1989, 1991, 1992, 1993, 1994=0A= May 2 16:09:11 /kernel: The Regents of the University of California. = All rights reserved.=0A= May 2 16:09:11 /kernel: FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 = GMT 2003=0A= May 2 16:09:11 /kernel: = root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC=0A= May 2 16:09:11 /kernel: Timecounter "i8254" frequency 1193182 Hz=0A= May 2 16:09:11 /kernel: CPU: Intel Pentium III (866.43-MHz 686-class = CPU)=0A= May 2 16:09:11 /kernel: Origin =3D "GenuineIntel" Id =3D 0x686 = Stepping =3D 6=0A= May 2 16:09:11 /kernel: = Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE>=0A= May 2 16:09:11 /kernel: real memory =3D 268353536 (262064K bytes)=0A= May 2 16:09:11 /kernel: config> di bt0=0A= May 2 16:09:11 /kernel: config> di aic0=0A= May 2 16:09:11 /kernel: config> di aha0=0A= May 2 16:09:11 /kernel: config> di adv0=0A= May 2 16:09:11 /kernel: config> q=0A= May 2 16:09:11 /kernel: avail memory =3D 255881216 (249884K bytes)=0A= May 2 16:09:11 /kernel: Preloaded elf kernel "kernel" at 0xc051d000.=0A= May 2 16:09:11 /kernel: Preloaded userconfig_script = "/boot/kernel.conf" at 0xc051d09c.=0A= May 2 16:09:11 /kernel: Pentium Pro MTRR support enabled=0A= May 2 16:09:11 /kernel: md0: Malloc disk=0A= May 2 16:09:11 /kernel: Using $PIR table, 9 entries at 0xc00f1260=0A= May 2 16:09:11 /kernel: npx0: <math processor> on motherboard=0A= May 2 16:09:11 /kernel: npx0: INT 16 interface=0A= May 2 16:09:11 /kernel: pcib0: <Host to PCI bridge> on motherboard=0A= May 2 16:09:11 /kernel: pci0: <PCI bus> on pcib0=0A= May 2 16:09:11 /kernel: agp0: <VIA 82C691 (Apollo Pro) host to PCI = bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0=0A= May 2 16:09:11 /kernel: pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI = (AGP) bridge> at device 1.0 on pci0=0A= May 2 16:09:11 /kernel: pci1: <PCI bus> on pcib2=0A= May 2 16:09:11 /kernel: pci1: <NVidia model 0110 graphics accelerator> = at 0.0 irq 11=0A= May 2 16:09:11 /kernel: isab0: <VIA 82C686 PCI-ISA bridge> at device = 4.0 on pci0=0A= May 2 16:09:11 /kernel: isa0: <ISA bus> on isab0=0A= May 2 16:09:11 /kernel: atapci0: <VIA 82C686 ATA100 controller> port = 0xd800-0xd80f at device 4.1 on pci0=0A= May 2 16:09:11 /kernel: ata0: at 0x1f0 irq 14 on atapci0=0A= May 2 16:09:11 /kernel: ata1: at 0x170 irq 15 on atapci0=0A= May 2 16:09:11 /kernel: uhci0: <VIA 83C572 USB controller> port = 0xd400-0xd41f irq 10 at device 4.2 on pci0=0A= May 2 16:09:11 /kernel: usb0: <VIA 83C572 USB controller> on uhci0=0A= May 2 16:09:11 /kernel: usb0: USB revision 1.0=0A= May 2 16:09:11 /kernel: uhub0: VIA UHCI root hub, class 9/0, rev = 1.00/1.00, addr 1=0A= May 2 16:09:11 /kernel: uhub0: 2 ports with 2 removable, self powered=0A= May 2 16:09:11 /kernel: uhci1: <VIA 83C572 USB controller> port = 0xd000-0xd01f irq 10 at device 4.3 on pci0=0A= May 2 16:09:11 /kernel: usb1: <VIA 83C572 USB controller> on uhci1=0A= May 2 16:09:11 /kernel: usb1: USB revision 1.0=0A= May 2 16:09:11 /kernel: uhub1: VIA UHCI root hub, class 9/0, rev = 1.00/1.00, addr 1=0A= May 2 16:09:11 /kernel: uhub1: 2 ports with 2 removable, self powered=0A= May 2 16:09:11 /kernel: pci0: <unknown card> (vendor=3D0x1106, = dev=3D0x3057) at 4.4=0A= May 2 16:09:11 /kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> at = device 9.0 on pci0=0A= May 2 16:09:11 /kernel: xl0: couldn't map ports/memory=0A= May 2 16:09:11 /kernel: device_probe_and_attach: xl0 attach returned 6=0A= May 2 16:09:11 /kernel: rl0: <RealTek 8139 10/100BaseTX> at device = 10.0 on pci0=0A= May 2 16:09:11 /kernel: rl0: couldn't map ports/memory=0A= May 2 16:09:11 /kernel: device_probe_and_attach: rl0 attach returned 6=0A= May 2 16:09:11 /kernel: pcib1: <Host to PCI bridge> on motherboard=0A= May 2 16:09:11 /kernel: pci2: <PCI bus> on pcib1=0A= May 2 16:09:11 /kernel: fdc0: <NEC 72065B or clone> at port = 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A= May 2 16:09:11 /kernel: fdc0: FIFO enabled, 8 bytes threshold=0A= May 2 16:09:11 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A= May 2 16:09:11 /kernel: atkbdc0: <Keyboard controller (i8042)> at port = 0x60,0x64 on isa0=0A= May 2 16:09:11 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on = atkbdc0=0A= May 2 16:09:11 /kernel: kbd0 at atkbd0=0A= May 2 16:09:11 /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A= May 2 16:09:11 /kernel: psm0: model IntelliMouse Explorer, device ID 4=0A= May 2 16:09:11 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df = iomem 0xa0000-0xbffff on isa0=0A= May 2 16:09:11 /kernel: sc0: <System console> at flags 0x100 on isa0=0A= May 2 16:09:11 /kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A= May 2 16:09:11 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on = isa0=0A= May 2 16:09:11 /kernel: sio0: type 16550A=0A= May 2 16:09:11 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A= May 2 16:09:11 /kernel: sio1: type 16550A=0A= May 2 16:09:11 /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq = 7 on isa0=0A= May 2 16:09:11 /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in = COMPATIBLE mode=0A= May 2 16:09:11 /kernel: ppc0: FIFO with 16/16/8 bytes threshold=0A= May 2 16:09:11 /kernel: plip0: <PLIP network interface> on ppbus0=0A= May 2 16:09:11 /kernel: lpt0: <Printer> on ppbus0=0A= May 2 16:09:11 /kernel: lpt0: Interrupt-driven port=0A= May 2 16:09:11 /kernel: ppi0: <Parallel I/O> on ppbus0=0A= May 2 16:09:11 /kernel: ad0: 28629MB <WDC WD300BB-00AUA1> = [58168/16/63] at ata0-master UDMA100=0A= May 2 16:09:11 /kernel: acd0: DVD-ROM <DVD-ROM DDU1621> at ata1-master = PIO4=0A= May 2 16:09:11 /kernel: acd1: CDROM <CD-ROM 52X/AKH> at ata1-slave PIO4=0A= May 2 16:09:11 /kernel: Mounting root from ufs:/dev/ad0s1a=0A= May 2 16:12:39 login: ROOT LOGIN (root) ON ttyv0=0A= May 2 16:21:39 login: ROOT LOGIN (root) ON ttyv1=0A= May 2 16:33:00 shutdown: halt by root: =0A= May 2 16:33:02 syslogd: exiting on signal 15=0A= May 6 15:48:05 /kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A= May 6 15:48:05 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, = 1989, 1991, 1992, 1993, 1994=0A= May 6 15:48:05 /kernel: The Regents of the University of California. = All rights reserved.=0A= May 6 15:48:05 /kernel: FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 = GMT 2003=0A= May 6 15:48:05 /kernel: = root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC=0A= May 6 15:48:05 /kernel: Timecounter "i8254" frequency 1193182 Hz=0A= May 6 15:48:05 /kernel: CPU: Intel Pentium III (866.43-MHz 686-class = CPU)=0A= May 6 15:48:05 /kernel: Origin =3D "GenuineIntel" Id =3D 0x686 = Stepping =3D 6=0A= May 6 15:48:05 /kernel: = Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE>=0A= May 6 15:48:05 /kernel: real memory =3D 268353536 (262064K bytes)=0A= May 6 15:48:05 /kernel: config> di bt0=0A= May 6 15:48:05 /kernel: config> di aic0=0A= May 6 15:48:05 /kernel: config> di aha0=0A= May 6 15:48:05 /kernel: config> di adv0=0A= May 6 15:48:05 /kernel: config> q=0A= May 6 15:48:05 /kernel: avail memory =3D 255881216 (249884K bytes)=0A= May 6 15:48:05 /kernel: Preloaded elf kernel "kernel" at 0xc051d000.=0A= May 6 15:48:05 /kernel: Preloaded userconfig_script = "/boot/kernel.conf" at 0xc051d09c.=0A= May 6 15:48:05 /kernel: Pentium Pro MTRR support enabled=0A= May 6 15:48:05 /kernel: md0: Malloc disk=0A= May 6 15:48:05 /kernel: Using $PIR table, 9 entries at 0xc00f1260=0A= May 6 15:48:05 /kernel: npx0: <math processor> on motherboard=0A= May 6 15:48:05 /kernel: npx0: INT 16 interface=0A= May 6 15:48:05 /kernel: pcib0: <Host to PCI bridge> on motherboard=0A= May 6 15:48:05 /kernel: pci0: <PCI bus> on pcib0=0A= May 6 15:48:05 /kernel: agp0: <VIA 82C691 (Apollo Pro) host to PCI = bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0=0A= May 6 15:48:05 /kernel: pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI = (AGP) bridge> at device 1.0 on pci0=0A= May 6 15:48:05 /kernel: pci1: <PCI bus> on pcib2=0A= May 6 15:48:05 /kernel: pci1: <NVidia model 0110 graphics accelerator> = at 0.0 irq 11=0A= May 6 15:48:05 /kernel: isab0: <VIA 82C686 PCI-ISA bridge> at device = 4.0 on pci0=0A= May 6 15:48:05 /kernel: isa0: <ISA bus> on isab0=0A= May 6 15:48:05 /kernel: atapci0: <VIA 82C686 ATA100 controller> port = 0xd800-0xd80f at device 4.1 on pci0=0A= May 6 15:48:05 /kernel: ata0: at 0x1f0 irq 14 on atapci0=0A= May 6 15:48:05 /kernel: ata1: at 0x170 irq 15 on atapci0=0A= May 6 15:48:05 /kernel: uhci0: <VIA 83C572 USB controller> port = 0xd400-0xd41f irq 10 at device 4.2 on pci0=0A= May 6 15:48:05 /kernel: usb0: <VIA 83C572 USB controller> on uhci0=0A= May 6 15:48:05 /kernel: usb0: USB revision 1.0=0A= May 6 15:48:05 /kernel: uhub0: VIA UHCI root hub, class 9/0, rev = 1.00/1.00, addr 1=0A= May 6 15:48:05 /kernel: uhub0: 2 ports with 2 removable, self powered=0A= May 6 15:48:05 /kernel: uhci1: <VIA 83C572 USB controller> port = 0xd000-0xd01f irq 10 at device 4.3 on pci0=0A= May 6 15:48:05 /kernel: usb1: <VIA 83C572 USB controller> on uhci1=0A= May 6 15:48:05 /kernel: usb1: USB revision 1.0=0A= May 6 15:48:05 /kernel: uhub1: VIA UHCI root hub, class 9/0, rev = 1.00/1.00, addr 1=0A= May 6 15:48:05 /kernel: uhub1: 2 ports with 2 removable, self powered=0A= May 6 15:48:05 /kernel: pci0: <unknown card> (vendor=3D0x1106, = dev=3D0x3057) at 4.4=0A= May 6 15:48:05 /kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> at = device 9.0 on pci0=0A= May 6 15:48:05 /kernel: xl0: couldn't map ports/memory=0A= May 6 15:48:05 /kernel: device_probe_and_attach: xl0 attach returned 6=0A= May 6 15:48:05 /kernel: rl0: <RealTek 8139 10/100BaseTX> at device = 10.0 on pci0=0A= May 6 15:48:05 /kernel: rl0: couldn't map ports/memory=0A= May 6 15:48:05 /kernel: device_probe_and_attach: rl0 attach returned 6=0A= May 6 15:48:05 /kernel: pcib1: <Host to PCI bridge> on motherboard=0A= May 6 15:48:05 /kernel: pci2: <PCI bus> on pcib1=0A= May 6 15:48:05 /kernel: fdc0: <NEC 72065B or clone> at port = 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A= May 6 15:48:05 /kernel: fdc0: FIFO enabled, 8 bytes threshold=0A= May 6 15:48:05 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A= May 6 15:48:05 /kernel: atkbdc0: <Keyboard controller (i8042)> at port = 0x60,0x64 on isa0=0A= May 6 15:48:05 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on = atkbdc0=0A= May 6 15:48:05 /kernel: kbd0 at atkbd0=0A= May 6 15:48:05 /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A= May 6 15:48:05 /kernel: psm0: model IntelliMouse Explorer, device ID 4=0A= May 6 15:48:05 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df = iomem 0xa0000-0xbffff on isa0=0A= May 6 15:48:05 /kernel: sc0: <System console> at flags 0x100 on isa0=0A= May 6 15:48:05 /kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A= May 6 15:48:05 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on = isa0=0A= May 6 15:48:05 /kernel: sio0: type 16550A=0A= May 6 15:48:05 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A= May 6 15:48:05 /kernel: sio1: type 16550A=0A= May 6 15:48:05 /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq = 7 on isa0=0A= May 6 15:48:05 /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in = COMPATIBLE mode=0A= May 6 15:48:05 /kernel: ppc0: FIFO with 16/16/8 bytes threshold=0A= May 6 15:48:05 /kernel: plip0: <PLIP network interface> on ppbus0=0A= May 6 15:48:05 /kernel: lpt0: <Printer> on ppbus0=0A= May 6 15:48:05 /kernel: lpt0: Interrupt-driven port=0A= May 6 15:48:05 /kernel: ppi0: <Parallel I/O> on ppbus0=0A= May 6 15:48:05 /kernel: ad0: 28629MB <WDC WD300BB-00AUA1> = [58168/16/63] at ata0-master UDMA100=0A= May 6 15:48:05 /kernel: acd0: DVD-ROM <DVD-ROM DDU1621> at ata1-master = PIO4=0A= May 6 15:48:05 /kernel: acd1: CDROM <CD-ROM 52X/AKH> at ata1-slave PIO4=0A= May 6 15:48:05 /kernel: Mounting root from ufs:/dev/ad0s1a=0A= May 6 15:48:48 login: ROOT LOGIN (root) ON ttyv0=0A= May 6 16:36:39 kdm[418]: Server for display :0 terminated unexpectedly=0A= May 6 16:36:39 kdm[418]: Server for display :0 terminated unexpectedly=0A= May 6 16:36:39 kdm[424]: IO Error in XOpenDisplay=0A= May 6 16:36:39 kdm[418]: Server for display :0 terminated unexpectedly=0A= May 6 16:36:39 kdm[418]: Server for display :0 terminated unexpectedly=0A= May 6 16:36:39 kdm[418]: Display :0 is being disabled (restarting too = fast)=0A= May 6 16:37:00 reboot: rebooted by root=0A= May 6 16:37:00 syslogd: exiting on signal 15=0A= May 6 16:37:50 /kernel: Copyright (c) 1992-2003 The FreeBSD Project.=0A= May 6 16:37:50 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, = 1989, 1991, 1992, 1993, 1994=0A= May 6 16:37:50 /kernel: The Regents of the University of California. = All rights reserved.=0A= May 6 16:37:50 /kernel: FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 = GMT 2003=0A= May 6 16:37:50 /kernel: = root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC=0A= May 6 16:37:50 /kernel: Timecounter "i8254" frequency 1193182 Hz=0A= May 6 16:37:50 /kernel: CPU: Intel Pentium III (866.43-MHz 686-class = CPU)=0A= May 6 16:37:50 /kernel: Origin =3D "GenuineIntel" Id =3D 0x686 = Stepping =3D 6=0A= May 6 16:37:50 /kernel: = Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE>=0A= May 6 16:37:50 /kernel: real memory =3D 268353536 (262064K bytes)=0A= May 6 16:37:50 /kernel: config> di bt0=0A= May 6 16:37:50 /kernel: config> di aic0=0A= May 6 16:37:50 /kernel: config> di aha0=0A= May 6 16:37:50 /kernel: config> di adv0=0A= May 6 16:37:50 /kernel: config> q=0A= May 6 16:37:50 /kernel: avail memory =3D 255881216 (249884K bytes)=0A= May 6 16:37:50 /kernel: Preloaded elf kernel "kernel" at 0xc051d000.=0A= May 6 16:37:50 /kernel: Preloaded userconfig_script = "/boot/kernel.conf" at 0xc051d09c.=0A= May 6 16:37:50 /kernel: Pentium Pro MTRR support enabled=0A= May 6 16:37:50 /kernel: md0: Malloc disk=0A= May 6 16:37:50 /kernel: Using $PIR table, 9 entries at 0xc00f1260=0A= May 6 16:37:50 /kernel: npx0: <math processor> on motherboard=0A= May 6 16:37:50 /kernel: npx0: INT 16 interface=0A= May 6 16:37:50 /kernel: pcib0: <Host to PCI bridge> on motherboard=0A= May 6 16:37:50 /kernel: pci0: <PCI bus> on pcib0=0A= May 6 16:37:50 /kernel: agp0: <VIA 82C691 (Apollo Pro) host to PCI = bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0=0A= May 6 16:37:50 /kernel: pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI = (AGP) bridge> at device 1.0 on pci0=0A= May 6 16:37:50 /kernel: pci1: <PCI bus> on pcib2=0A= May 6 16:37:50 /kernel: pci1: <NVidia model 0110 graphics accelerator> = at 0.0 irq 11=0A= May 6 16:37:50 /kernel: isab0: <VIA 82C686 PCI-ISA bridge> at device = 4.0 on pci0=0A= May 6 16:37:50 /kernel: isa0: <ISA bus> on isab0=0A= May 6 16:37:50 /kernel: atapci0: <VIA 82C686 ATA100 controller> port = 0xd800-0xd80f at device 4.1 on pci0=0A= May 6 16:37:50 /kernel: ata0: at 0x1f0 irq 14 on atapci0=0A= May 6 16:37:50 /kernel: ata1: at 0x170 irq 15 on atapci0=0A= May 6 16:37:50 /kernel: uhci0: <VIA 83C572 USB controller> port = 0xd400-0xd41f irq 10 at device 4.2 on pci0=0A= May 6 16:37:50 /kernel: usb0: <VIA 83C572 USB controller> on uhci0=0A= May 6 16:37:50 /kernel: usb0: USB revision 1.0=0A= May 6 16:37:50 /kernel: uhub0: VIA UHCI root hub, class 9/0, rev = 1.00/1.00, addr 1=0A= May 6 16:37:50 /kernel: uhub0: 2 ports with 2 removable, self powered=0A= May 6 16:37:50 /kernel: uhci1: <VIA 83C572 USB controller> port = 0xd000-0xd01f irq 10 at device 4.3 on pci0=0A= May 6 16:37:50 /kernel: usb1: <VIA 83C572 USB controller> on uhci1=0A= May 6 16:37:50 /kernel: usb1: USB revision 1.0=0A= May 6 16:37:50 /kernel: uhub1: VIA UHCI root hub, class 9/0, rev = 1.00/1.00, addr 1=0A= May 6 16:37:50 /kernel: uhub1: 2 ports with 2 removable, self powered=0A= May 6 16:37:50 /kernel: pci0: <unknown card> (vendor=3D0x1106, = dev=3D0x3057) at 4.4=0A= May 6 16:37:50 /kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> at = device 9.0 on pci0=0A= May 6 16:37:50 /kernel: xl0: couldn't map ports/memory=0A= May 6 16:37:50 /kernel: device_probe_and_attach: xl0 attach returned 6=0A= May 6 16:37:50 /kernel: rl0: <RealTek 8139 10/100BaseTX> at device = 10.0 on pci0=0A= May 6 16:37:50 /kernel: rl0: couldn't map ports/memory=0A= May 6 16:37:50 /kernel: device_probe_and_attach: rl0 attach returned 6=0A= May 6 16:37:50 /kernel: pcib1: <Host to PCI bridge> on motherboard=0A= May 6 16:37:50 /kernel: pci2: <PCI bus> on pcib1=0A= May 6 16:37:50 /kernel: fdc0: <NEC 72065B or clone> at port = 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A= May 6 16:37:50 /kernel: fdc0: FIFO enabled, 8 bytes threshold=0A= May 6 16:37:50 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A= May 6 16:37:50 /kernel: atkbdc0: <Keyboard controller (i8042)> at port = 0x60,0x64 on isa0=0A= May 6 16:37:50 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on = atkbdc0=0A= May 6 16:37:50 /kernel: kbd0 at atkbd0=0A= May 6 16:37:50 /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A= May 6 16:37:50 /kernel: psm0: model IntelliMouse Explorer, device ID 4=0A= May 6 16:37:50 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df = iomem 0xa0000-0xbffff on isa0=0A= May 6 16:37:50 /kernel: sc0: <System console> at flags 0x100 on isa0=0A= May 6 16:37:50 /kernel: sc0: VGA <16 virtual consoles, flags=3D0x300>=0A= May 6 16:37:50 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on = isa0=0A= May 6 16:37:50 /kernel: sio0: type 16550A=0A= May 6 16:37:50 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A= May 6 16:37:50 /kernel: sio1: type 16550A=0A= May 6 16:37:50 /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq = 7 on isa0=0A= May 6 16:37:50 /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in = COMPATIBLE mode=0A= May 6 16:37:50 /kernel: ppc0: FIFO with 16/16/8 bytes threshold=0A= May 6 16:37:50 /kernel: plip0: <PLIP network interface> on ppbus0=0A= May 6 16:37:50 /kernel: lpt0: <Printer> on ppbus0=0A= May 6 16:37:50 /kernel: lpt0: Interrupt-driven port=0A= May 6 16:37:50 /kernel: ppi0: <Parallel I/O> on ppbus0=0A= May 6 16:37:50 /kernel: ad0: 28629MB <WDC WD300BB-00AUA1> = [58168/16/63] at ata0-master UDMA100=0A= May 6 16:37:50 /kernel: acd0: DVD-ROM <DVD-ROM DDU1621> at ata1-master = PIO4=0A= May 6 16:37:50 /kernel: acd1: CDROM <CD-ROM 52X/AKH> at ata1-slave PIO4=0A= May 6 16:37:50 /kernel: Mounting root from ufs:/dev/ad0s1a=0A= May 6 16:38:14 login: ROOT LOGIN (root) ON ttyv0=0A= May 6 16:38:18 kdm[143]: IO Error in XOpenDisplay=0A= May 6 16:38:18 kdm[141]: Server for display :0 terminated unexpectedly=0A= May 6 16:38:18 kdm[145]: IO Error in XOpenDisplay=0A= May 6 16:38:18 kdm[141]: Server for display :0 terminated unexpectedly=0A= May 6 16:38:18 kdm[147]: IO Error in XOpenDisplay=0A= May 6 16:38:18 kdm[141]: Server for display :0 terminated unexpectedly=0A= May 6 16:38:18 kdm[141]: Server for display :0 terminated unexpectedly=0A= May 6 16:38:18 kdm[141]: Display :0 is being disabled (restarting too = fast)=0A= ------=_NextPart_000_002E_01C31482.2198EC80 Content-Type: application/octet-stream; name="XFree86.0.log" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="XFree86.0.log" =0A= XFree86 Version 4.3.0=0A= Release Date: 27 February 2003=0A= X Protocol Version 11, Revision 0, Release 6.6=0A= Build Operating System: FreeBSD 4.8 i386 [ELF] =0A= Build Date: 23 March 2003=0A= Before reporting problems, check http://www.XFree86.Org/=0A= to make sure that you have the latest version.=0A= Module Loader present=0A= Markers: (--) probed, (**) from config file, (=3D=3D) default setting,=0A= (++) from command line, (!!) notice, (II) informational,=0A= (WW) warning, (EE) error, (NI) not implemented, (??) unknown.=0A= (=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Wed May 7 09:22:29 = 2003=0A= (=3D=3D) Using config file: "/etc/XF86Config"=0A= (=3D=3D) ServerLayout "Simple Layout"=0A= (**) |-->Screen "Screen 1" (0)=0A= (**) | |-->Monitor "IIyama"=0A= (**) | |-->Device "NVIDIA GeForce2 MX"=0A= (**) |-->Input Device "Mouse1"=0A= (**) |-->Input Device "Keyboard1"=0A= (**) Option "AutoRepeat" "500 30"=0A= (**) Option "XkbRules" "xfree86"=0A= (**) XKB: rules: "xfree86"=0A= (**) Option "XkbModel" "pc101"=0A= (**) XKB: model: "pc101"=0A= (**) Option "XkbLayout" "us"=0A= (**) XKB: layout: "us"=0A= (**) Option "XkbVariant" "us"=0A= (**) XKB: variant: "us"=0A= (=3D=3D) Keyboard: CustomKeycode disabled=0A= (WW) `fonts.dir' not found (or not valid) in = "/usr/X11R6/lib/X11/fonts/local/".=0A= Entry deleted from font path.=0A= (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").=0A= (**) FontPath set to = "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,= /usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo= /,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X1= 1R6/lib/X11/fonts/100dpi/"=0A= (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"=0A= (=3D=3D) ModulePath set to "/usr/X11R6/lib/modules"=0A= (WW) checkDevMem: failed to open /dev/mem (Operation not permitted)=0A= (--) Using syscons driver with X support (version 2.0)=0A= (--) using VT number 9=0A= =0A= =0A= Fatal server error:=0A= xf86EnableIO: Failed to open /dev/io for extended I/O=0A= =0A= =0A= When reporting a problem related to a server crash, please send=0A= the full server output, not just the last messages.=0A= This can be found in the log file "/var/log/XFree86.0.log".=0A= Please report problems to xfree86@xfree86.org.=0A= =0A= ------=_NextPart_000_002E_01C31482.2198EC80 Content-Type: application/octet-stream; name="XFree86.0.log.old" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="XFree86.0.log.old" =0A= XFree86 Version 4.3.0=0A= Release Date: 27 February 2003=0A= X Protocol Version 11, Revision 0, Release 6.6=0A= Build Operating System: FreeBSD 4.8 i386 [ELF] =0A= Build Date: 23 March 2003=0A= Before reporting problems, check http://www.XFree86.Org/=0A= to make sure that you have the latest version.=0A= Module Loader present=0A= Markers: (--) probed, (**) from config file, (=3D=3D) default setting,=0A= (++) from command line, (!!) notice, (II) informational,=0A= (WW) warning, (EE) error, (NI) not implemented, (??) unknown.=0A= (=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Wed May 7 09:19:09 = 2003=0A= (=3D=3D) Using config file: "/etc/XF86Config"=0A= (=3D=3D) ServerLayout "Simple Layout"=0A= (**) |-->Screen "Screen 1" (0)=0A= (**) | |-->Monitor "IIyama"=0A= (**) | |-->Device "NVIDIA GeForce2 MX"=0A= (**) |-->Input Device "Mouse1"=0A= (**) |-->Input Device "Keyboard1"=0A= (**) Option "AutoRepeat" "500 30"=0A= (**) Option "XkbRules" "xfree86"=0A= (**) XKB: rules: "xfree86"=0A= (**) Option "XkbModel" "pc101"=0A= (**) XKB: model: "pc101"=0A= (**) Option "XkbLayout" "us"=0A= (**) XKB: layout: "us"=0A= (**) Option "XkbVariant" "us"=0A= (**) XKB: variant: "us"=0A= (=3D=3D) Keyboard: CustomKeycode disabled=0A= (WW) `fonts.dir' not found (or not valid) in = "/usr/X11R6/lib/X11/fonts/local/".=0A= Entry deleted from font path.=0A= (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").=0A= (**) FontPath set to = "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,= /usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo= /,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X1= 1R6/lib/X11/fonts/100dpi/"=0A= (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"=0A= (=3D=3D) ModulePath set to "/usr/X11R6/lib/modules"=0A= (WW) checkDevMem: failed to open /dev/mem (Operation not permitted)=0A= (--) Using syscons driver with X support (version 2.0)=0A= (--) using VT number 9=0A= =0A= =0A= Fatal server error:=0A= xf86EnableIO: Failed to open /dev/io for extended I/O=0A= =0A= =0A= When reporting a problem related to a server crash, please send=0A= the full server output, not just the last messages.=0A= This can be found in the log file "/var/log/XFree86.0.log".=0A= Please report problems to xfree86@xfree86.org.=0A= =0A= ------=_NextPart_000_002E_01C31482.2198EC80--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002d01c31471$5e101c80$e20064c0>