Date: Tue, 23 Dec 2003 21:13:25 +0100 From: "Lars =?iso-8859-1?Q?K=F6ller?=" <Lars@koellers.net> To: Doug White <dwhite@gumbysoft.com> Cc: freebsd-questions@freebsd.org Subject: Re: 5.2-rc1 Install and USB mouse problems Message-ID: <200312232013.hBNKDP6I001788@odie.koellers.net> In-Reply-To: Message from "Lars =?iso-8859-1?Q?K=F6ller?=" <Lars@koellers.net> <200312230937.hBN9bDXd009889@odie.koellers.net>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multipart MIME message. --==_Exmh_-21403017220 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Hello! In reply to "Lars =3D?iso-8859-1?Q?K=3DF6ller?=3D" who wrote: >>Not sure here; the USB mouse on my home system (VIA KT400 chipset) work= s >>as expected. perhaps there are two mouseds running? > >No, nothing in that area. At the moment I think it has to do with the = >usb code in the 5.2 kernel. The problem is I don't have an idea how to = >further debug. > >Do you know an USB-coding-expert, who can debug this with me? >Would be nice to have a mouse even when changing to 5.2 ;-) I've further test the extra USB2+FW Combo card, and if I plug my mouse = there it will run in under 4.9 and 5.2. However something in 5.2 has changed, which avoids a working usb mouse = with the onboard VIA usb port. The board is a Gigabyte GA6VXDC2 (SMP). I've detached and reattached the mouse to the onboard usb bus, and see: Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x= 0000), = rev 1.00 port 1 addr 0 should never happen! port 2 powered Attached are the dmesg.boot file for my 4.9 and 5.2 system and the = usbdevs -v output under 5.2 and 4.9. Have a look at the "shadow" device = in usbdev2-49.out after deconnecting the mouse from the PCI card usb = device and reconnect it to the onboard usb slot. Perhaps someone can have a look at it. Again best regards and merry christmas ;-) Lars -- = Lars K=F6ller E-Mail: lars@koellers.net (LKoeller@FreeBSD.ORG) -------- FreeBSD, was sonst? ---- http://www.de.freebsd.org -------- --==_Exmh_-21403017220 Content-Type: text/plain ; name="usbdevs2-49.out"; charset=iso-8859-1 Content-Description: usbdevs2-49.out Content-Disposition: attachment; filename="usbdevs2-49.out" Content-Transfer-Encoding: quoted-printable Controller /dev/usb0: addr 1: self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1= =2E00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1= =2E00 port 1 powered port 2 addr 2: low speed, power 100 mA, config 1, PS2/USB Browser Combo = Mouse(0x0011), Cypress Sem(0x05fe), rev 0.10 Controller /dev/usb2: addr 1: self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1= =2E00 port 1 powered port 2 powered --==_Exmh_-21403017220 Content-Type: text/plain ; name="usbdevs1-49.out"; charset=iso-8859-1 Content-Description: usbdevs1-49.out Content-Disposition: attachment; filename="usbdevs1-49.out" Content-Transfer-Encoding: quoted-printable Controller /dev/usb0: addr 1: self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1= =2E00 port 1 addr 2: low speed, power 100 mA, config 1, PS2/USB Browser Combo = Mouse(0x0011), Cypress Sem(0x05fe), rev 0.10 port 2 powered Controller /dev/usb1: addr 1: self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1= =2E00 port 1 powered port 2 addr 2: low speed, power 100 mA, config 1, product 0x0011(0x0011)= , Chic Technology(0x05fe), rev 0.10 Controller /dev/usb2: addr 1: self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1= =2E00 port 1 powered port 2 powered --==_Exmh_-21403017220 Content-Type: text/plain ; name="dmesg49.boot"; charset=iso-8859-1 Content-Description: dmesg49.boot Content-Disposition: attachment; filename="dmesg49.boot" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #0: Tue Oct 28 23:58:41 CET 2003 root@odie.koellers.net:/opt/temp/obj/usr/src/sys/ODIE Timecounter "i8254" frequency 1193182 Hz CPU: Intel Pentium III (800.03-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10 Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P= GE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 536805376 (524224K bytes) avail memory =3D 518049792 (505908K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0446000. Preloaded elf module "splash_pcx.ko" at 0xc044609c. Preloaded elf module "vesa.ko" at 0xc0446140. Preloaded splash_image_data "/boot/splash.pcx" at 0xc04461dc. Preloaded elf module "procfs.ko" at 0xc044622c. Preloaded elf module "vn.ko" at 0xc04462cc. Preloaded elf module "if_tun.ko" at 0xc0446368. Preloaded elf module "miibus.ko" at 0xc0446408. Preloaded elf module "if_xl.ko" at 0xc04464a8. Preloaded elf module "snd_sb16.ko" at 0xc0446548. Preloaded elf module "snd_sbc.ko" at 0xc04465e8. Preloaded elf module "snd_pcm.ko" at 0xc0446688. Preloaded elf module "usb.ko" at 0xc0446728. Preloaded elf module "ugen.ko" at 0xc04467c4. Preloaded elf module "uhid.ko" at 0xc0446860. Preloaded elf module "ukbd.ko" at 0xc04468fc. Preloaded elf module "ums.ko" at 0xc0446998. Preloaded elf module "umass.ko" at 0xc0446a34. Preloaded elf module "uscanner.ko" at 0xc0446ad4. Preloaded elf module "snp.ko" at 0xc0446b74. Preloaded elf module "firewire.ko" at 0xc0446c10. Preloaded elf module "sbp.ko" at 0xc0446cb0. VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0366282 (1000022) VESA: NVidia Pentium Pro MTRR support enabled acpi0: <AMIINT > on motherboard acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3fff= fff at device 0.0 on pci0 pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 o= n pci0 pci2: <PCI bus> on pcib1 pci2: <NVidia model 0110 graphics accelerator> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 o= n pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 9 at device 7.2= on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered viapropm0: SMBus I/O base at 0x400 viapropm0: <VIA VT82C686A Power Management Unit> port 0x400-0x40f at devi= ce 7.4 on pci0 viapropm0: could not allocate bus space device_probe_and_attach: viapropm0 attach returned 6 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd000-0xd0ff mem 0xdfffe000= -0xdfffefff irq 12 at device 9.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xdffffe80= -0xdffffeff irq 7 at device 10.0 on pci0 xl0: Ethernet address: 00:04:75:af:8e:8e miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bktr0: <BrookTree 848> mem 0xddcff000-0xddcfffff irq 9 at device 11.0 on = pci0 iicbb0: <I2C bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only iicsmb0: <I2C to SMB bridge> on iicbus0 smbus0: <System Management Bus> on iicsmb0 smb0: <SMBus general purpose I/O> on smbus0 iic0: <I2C general purpose I/O> on iicbus0 iicbus1: <Philips I2C bus> on iicbb0 master-only iicsmb1: <I2C to SMB bridge> on iicbus1 smbus1: <System Management Bus> on iicsmb1 smb1: <SMBus general purpose I/O> on smbus1 iic1: <I2C general purpose I/O> on iicbus1 smbus2: <System Management Bus> on bti2c0 smb2: <SMBus general purpose I/O> on smbus2 bktr0: Hauppauge Model 56104 D1 = bktr0: Hauppauge WinCast/TV, Temic PAL tuner. pcib2: <PCI to PCI bridge (vendor=3D3388 device=3D0021)> at device 12.0 o= n pci0 pci1: <PCI bus> on pcib2 ohci0: <NEC uPD 9210 USB controller> mem 0xdddfd000-0xdddfdfff irq 11 at = device 8.0 on pci1 usb1: OHCI version 1.0 usb1: <NEC uPD 9210 USB controller> on ohci0 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.10, addr 2, icl= ass 3/1 ums0: 5 buttons and Z dir. ohci1: <NEC uPD 9210 USB controller> mem 0xdddfe000-0xdddfefff irq 12 at = device 8.1 on pci1 usb2: OHCI version 1.0 usb2: <NEC uPD 9210 USB controller> on ohci1 usb2: USB revision 1.0 uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci1: <USB controller> at 8.2 irq 7 fwohci0: <VIA VT6306> port 0x8c00-0x8c7f mem 0xdddff800-0xdddfffff irq 12= at device 9.0 on pci1 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channel is 8. fwohci0: EUI64 00:01:08:00:37:01:5f:ac fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP2/SCSI over firewire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) sym0: <810a> port 0xd800-0xd8ff mem 0xdfffff00-0xdfffffff irq 12 at devic= e 13.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xccfff,0xcd000-0xd2= fff on isa0 pmtimer0 on isa0 fdc0: cannot reserve I/O port range atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0= sc0: <System console> on isa0 sc0: VGA <12 virtual consoles, flags=3D0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sbc0: <Creative SB16/SB32> at port 0x220-0x22f,0x330-0x331,0x388-0x38b ir= q 5 drq 1,5 on isa0 pcm0: <SB16 DSP 4.13> on sbc0 ata2: <Generic ESDI/IDE/ATA controller> at port 0x168-0x16f,0x36e-0x36f i= rq 10 on isa0 acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert disabled, rule-based forwarding e= nabled, default to accept, logging limited to 100 packets/entry by defaul= t DUMMYNET initialized (011031) SMP: AP CPU #1 Launched! ad0: 117800MB <IC35L120AVV207-1> [239340/16/63] at ata0-master UDMA66 Waiting 8 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: <DEC RZ2DD-LS (C) DEC 0306> Fixed Direct Access SCSI-2 device = da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST19101W 0014> Fixed Direct Access SCSI-2 device = da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da2 at ahc0 bus 0 target 2 lun 0 da2: <SEAGATE ST19101W 0014> Fixed Direct Access SCSI-2 device = da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) --==_Exmh_-21403017220 Content-Type: text/plain ; name="usbdevs2-52.out"; charset=iso-8859-1 Content-Description: usbdevs2-52.out Content-Disposition: attachment; filename="usbdevs2-52.out" Content-Transfer-Encoding: quoted-printable Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x= 0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x= 0000), rev 1.00 port 1 powered port 2 addr 2: low speed, power 100 mA, config 1, PS2/USB Browser Combo = Mouse(0x0011), Cypress Sem(0x05fe), rev 0.10 Controller /dev/usb2: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x= 0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), NEC(0x= 0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered --==_Exmh_-21403017220 Content-Type: text/plain ; name="usbdevs1-52.out"; charset=iso-8859-1 Content-Description: usbdevs1-52.out Content-Disposition: attachment; filename="usbdevs1-52.out" Content-Transfer-Encoding: quoted-printable Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x= 0000), rev 1.00 port 1 addr 0 should never happen! port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x= 0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x= 0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), NEC(0x= 0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered --==_Exmh_-21403017220 Content-Type: text/plain ; name="dmesg52.boot"; charset=iso-8859-1 Content-Description: dmesg52.boot Content-Disposition: attachment; filename="dmesg52.boot" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RC #1: Mon Dec 22 17:26:43 CET 2003 root@odie.koellers.net:/usr/src/sys/i386/compile/ODIE Preloaded elf kernel "/boot/kernel/kernel" at 0xc0834000. Preloaded elf module "/boot/kernel/splash_pcx.ko" at 0xc0834244. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc08342f4. Preloaded elf module "/boot/kernel/procfs.ko" at 0xc08343a0. Preloaded elf module "/boot/kernel/pseudofs.ko" at 0xc083444c. Preloaded elf module "/boot/kernel/if_tun.ko" at 0xc08344fc. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc08345a8. Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc0834654. Preloaded elf module "/boot/kernel/snd_sb16.ko" at 0xc0834700. Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc08347b0. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc083485c. Preloaded elf module "/boot/kernel/usb.ko" at 0xc0834908. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08349b0. Preloaded elf module "/boot/kernel/uhid.ko" at 0xc0834a5c. Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc0834b08. Preloaded elf module "/boot/kernel/ums.ko" at 0xc0834bb4. Preloaded elf module "/boot/kernel/umass.ko" at 0xc0834c5c. Preloaded elf module "/boot/kernel/uscanner.ko" at 0xc0834d08. Preloaded elf module "/boot/kernel/snp.ko" at 0xc0834db8. Preloaded elf module "/boot/kernel/firewire.ko" at 0xc0834e60. Preloaded elf module "/boot/kernel/sbp.ko" at 0xc0834f10. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (800.03-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10 Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P= GE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 536805376 (511 MB) avail memory =3D 511950848 (488 MB) ACPI APIC Table: <AMIINT > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard Pentium Pro MTRR support enabled VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0761c82 (1000022) VESA: NVidia module_register_init: MOD_LOAD (splash_pcx, 0xc075b710, 0) error 2 acpi0: <AMIINT > on motherboard pcibios: BIOS version 2.10 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 7 INTD is routed to irq 9 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3fff= fff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci2: <PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 16 pci2: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686A UDMA66 controller> port 0xffa0-0xffaf at device 7.1= on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 9 at device 7.2= on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.10, addr 2, icl= ass 3/1 ums0: 5 buttons and Z dir. viapropm0: SMBus I/O base at 0x400 viapropm0: <VIA VT82C686A Power Management Unit> port 0x400-0x40f at devi= ce 7.4 on pci0 viapropm0: SMBus revision code 0x0 smbus0: <System Management Bus> on viapropm0 smb0: <SMBus generic I/O> on smbus0 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd000-0xd0ff mem 0xdfffe000= -0xdfffefff irq 17 at device 9.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xdffffe80= -0xdffffeff irq 18 at device 10.0 on pci0 xl0: Ethernet address: 00:04:75:af:8e:8e miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bktr0: <BrookTree 848> mem 0xddcff000-0xddcfffff irq 19 at device 11.0 on= pci0 bktr0: Hauppauge Model 56104 D1 = bktr0: Hauppauge WinCast/TV, Temic PAL tuner. pcib2: <PCI-PCI bridge> at device 12.0 on pci0 pci1: <PCI bus> on pcib2 pcib2: slot 8 INTA is routed to irq 16 pcib2: slot 8 INTB is routed to irq 17 pcib2: slot 8 INTC is routed to irq 18 pcib2: slot 9 INTA is routed to irq 17 ohci0: <NEC uPD 9210 USB controller> mem 0xdddfd000-0xdddfdfff irq 16 at = device 8.0 on pci1 usb1: OHCI version 1.0 usb1: <NEC uPD 9210 USB controller> on ohci0 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci1: <NEC uPD 9210 USB controller> mem 0xdddfe000-0xdddfefff irq 17 at = device 8.1 on pci1 usb2: OHCI version 1.0 usb2: <NEC uPD 9210 USB controller> on ohci1 usb2: USB revision 1.0 uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xdddff700-0xdddff7ff irq = 18 at device 8.2 on pci1 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 0.95 usb3: companion controllers, 2 ports each: usb1 usb2 usb3: <NEC uPD 720100 USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 4 ports with 4 removable, self powered fwohci0: <VIA VT6306> port 0x8c00-0x8c7f mem 0xdddff800-0xdddfffff irq 17= at device 9.0 on pci1 fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channel is 8. fwohci0: EUI64 00:01:08:00:37:01:5f:ac fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) sym0: <810a> port 0xd800-0xd8ff mem 0xdfffff00-0xdfffffff irq 17 at devic= e 13.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,= 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROMs> at iomem 0xcd000-0xd2fff,0xcc800-0xccfff,0xc0000-0xcc= 7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <12 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0= sbc0: <Creative SB16/SB32> at port 0x388-0x38b,0x330-0x331,0x220-0x22f ir= q 5 drq 5,1 on isa0 pcm0: <SB16 DSP 4.13> on sbc0 ata2: <Generic ESDI/IDE/ATA controller> at port 0x36e-0x36f,0x168-0x16f i= rq 10 on isa0 ata2: [MPSAFE] Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding enabled, defaul= t to accept, logging limited to 100 packets/entry by default GEOM: create disk ad0 dp=3D0xc3320860 ad0: 117800MB <IC35L120AVV207-1> [239340/16/63] at ata0-master UDMA66 Waiting 8 seconds for SCSI devices to settle GEOM: create disk da0 dp=3D0xc33f5050 GEOM: create disk da1 dp=3D0xc33e7c50 GEOM: create disk da2 dp=3D0xc331a050 da0 at ahc0 bus 0 target 0 lun 0 da0: <DEC RZ2DD-LS (C) DEC 0306> Fixed Direct Access SCSI-2 device = da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST19101W 0014> Fixed Direct Access SCSI-2 device = da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da2 at ahc0 bus 0 target 2 lun 0 da2: <SEAGATE ST19101W 0014> Fixed Direct Access SCSI-2 device = da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/ad0s2a --==_Exmh_-21403017220--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200312232013.hBNKDP6I001788>