Date: Thu, 03 Mar 2005 13:28:09 +0000 From: Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> To: Artem Kuchin <matrix@itlegion.ru> Cc: FreeBSD Stable <freebsd-stable@freebsd.org> Subject: Re: Need really cheap IDE mirroring PCI controlled for FreebBSD4.10 Message-ID: <1109856489.85219.2.camel@buffy.york.ac.uk> In-Reply-To: <01ab01c51fec$c1b00b50$0c00a8c0@artem> References: <20050302104641.44708.qmail@web54004.mail.yahoo.com> <20050302111457.GB97448@pc5-179.lri.fr> <024601c51f33$eda69e40$0c00a8c0@artem> <57d7100005030221505d8ff1b2@mail.gmail.com> <00b101c51fd1$3fd448f0$0c00a8c0@artem> <1109851802.84539.10.camel@buffy.york.ac.uk> <01ab01c51fec$c1b00b50$0c00a8c0@artem>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 2005-03-03 at 15:30 +0300, Artem Kuchin wrote: > Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> wrote: > > On Thu, 2005-03-03 at 12:13 +0300, Artem Kuchin wrote: > >> pete wright <nomadlogic@gmail.com> wrote: > >>> On Wed, 2 Mar 2005 17:27:07 +0300, Artem Kuchin <matrix@itlegion.ru> > >>> wrote: > >>>> Can anybody recommend cheap IDE mirroring PCI (2.0, not 2.1 or 2.2) > >>>> controller with just 2 IDE ports which works fine with FreeBSD > >>>> 4.10 ? > >>>> > >>>> It is to be installed on a very old motherboard (1998) and two 40GB > >>>> IDE driver (more or less modern ones, at least not used ones for > >>>> sure). > >>> > >>> sorry I don't know of any really cheap one's off hand, altho I do > >>> have experience with 3Ware RAID cards on 4.x. They seemed to work > >>> well, and they are less expensive than proper SCSI cards...altho > >>> slower. If cost really an issue would it be worth mirroring your > >>> disks in software via VINUM? > >> > >> Well, i don't trust software raids. But 3ware is probably one of the > >> most expensive raid 0,1 controllers. There must be something around > >> 40$ which freebsd supports. Does anyone known any model? > > > > I'm currently using an Adaptec 1200A on > > FreeBSD 5.3-STABLE #1: Fri Feb 4 02:43:22 GMT 2005 > > root@zoidberg.xxxxxxx.co.uk:/usr/obj/usr/src/sys/ZOIDBERG > > > > and it works without any problems. I'm using it in RAID1 mode and it > > seems to be nice and fast. It's happy booting and running even with > > one > > of the pair removed, and is happy with rebuilding afterwards. > > Although, > > to be honest once this machine has booted it mainly only uses the > > disks > > for logging, so I'm not putting significant load in the controller. > > > > atapci0: <HighPoint HPT370 UDMA100 controller> port > > HighPoint HPT370 ? So this Adaptec 1200A is actually > HPT370? I see you use it on 5.3-STABLE. Are the drivers built in or > you downloaded them from the vendor's site? I'm just using the ATA driver built-in to 5.3. It seems to work fine for me. Gavin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1109856489.85219.2.camel>