From owner-freebsd-hardware@FreeBSD.ORG Mon Jan 18 15:01:47 2010 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 72E151065679 for ; Mon, 18 Jan 2010 15:01:47 +0000 (UTC) (envelope-from cowens@greatbaysoftware.com) Received: from portcityhosting.com (bayringfw.portcityweb.com [64.140.243.92]) by mx1.freebsd.org (Postfix) with ESMTP id 14ED98FC21 for ; Mon, 18 Jan 2010 15:01:46 +0000 (UTC) Received: from [127.0.0.1] ([173.14.128.81]) by portcityhosting.com with MailEnable ESMTP; Mon, 18 Jan 2010 10:01:47 -0500 X-WatchGuard-Mail-Exception: Allow Message-ID: <4B5478D1.4000900@greatbaysoftware.com> Date: Mon, 18 Jan 2010 10:05:53 -0500 From: Charles Owens MIME-Version: 1.0 To: freebsd-hardware@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-WatchGuard-AntiVirus: part scanned. clean action=allow X-ME-Bayesian: 0.000000 Subject: Minute+ delay between kernel load and initialization X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 18 Jan 2010 15:01:47 -0000 Hello, We have a new system based on the Intel S5520 motherboard that seems to work fine except during _every_ boot it pauses for about one minute 15 seconds just before any kernel initialization messages appear. We see the loader appearing to complete its work (the kernel is loaded) and then... it sits. Once it starts up again (with usual kernel-boot messages) it appears to boot normally (no error messages). This has been seen with both FreeBSD 8.0 and 7.1, using GENERIC kernels. I'd appreciate any and all assistance in figuring this out. Boot output follows (happens to be from a PAE-enabled kernel) Thank you, Charles # again... we see this output immediately _after_ the delay ends: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RELEASE-p5 #2: Fri Dec 18 15:03:26 UTC 2009 cowens@n_newcastle.greatbaysoftware.com:/usr/obj/usr/src/sys/BEACON Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (1995.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5 Features=0xbfebfbff Features2=0x9ce3bd AMD Features=0x28100000 AMD Features2=0x1 Cores per package: 8 Logical CPUs per core: 2 real memory = 8321499136 (7936 MB) avail memory = 6206566400 (5919 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard lapic0: Forcing LINT1 to edge trigger registered firmware set registered firmware set registered firmware set registered firmware set registered firmware set registered firmware set registered firmware set registered firmware set registered firmware set registered firmware set registered firmware set kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 28 at device 1.0 on pci0 pci1: on pcib1 igb0: port 0x3020-0x303f mem 0xb1b20000-0xb1b3ffff,0xb1b44000-0xb1b47fff irq 40 at device 0.0 on pci1 igb0: Using MSIX interrupts with 6 vectors igb0: [ITHREAD] igb0: [ITHREAD] igb0: [ITHREAD] igb0: [ITHREAD] igb0: [ITHREAD] igb0: [ITHREAD] igb0: Ethernet address: 00:15:17:ac:52:2d igb1: port 0x3000-0x301f mem 0xb1b00000-0xb1b1ffff,0xb1b40000-0xb1b43fff irq 28 at device 0.1 on pci1 igb1: Using MSIX interrupts with 6 vectors igb1: [ITHREAD] igb1: [ITHREAD] igb1: [ITHREAD] igb1: [ITHREAD] igb1: [ITHREAD] igb1: [ITHREAD] igb1: Ethernet address: 00:15:17:ac:52:2c pcib2: irq 24 at device 3.0 on pci0 pci2: on pcib2 pcib3: at device 0.0 on pci2 pci3: on pcib3 pcib4: at device 2.0 on pci3 pci4: on pcib4 em0: port 0x2020-0x203f mem 0xb1a60000-0xb1a7ffff,0xb1a40000-0xb1a5ffff irq 36 at device 0.0 on pci4 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:15:17:c6:79:60 em1: port 0x2000-0x201f mem 0xb1a20000-0xb1a3ffff,0xb1a00000-0xb1a1ffff irq 35 at device 0.1 on pci4 em1: Using MSI interrupt em1: [FILTER] em1: Ethernet address: 00:15:17:c6:79:61 pcib5: at device 4.0 on pci3 pci5: on pcib5 em2: port 0x1020-0x103f mem 0xb1960000-0xb197ffff,0xb1940000-0xb195ffff irq 34 at device 0.0 on pci5 em2: Using MSI interrupt em2: [FILTER] em2: Ethernet address: 00:15:17:c6:79:62 em3: port 0x1000-0x101f mem 0xb1920000-0xb193ffff,0xb1900000-0xb191ffff irq 24 at device 0.1 on pci5 em3: Using MSI interrupt em3: [FILTER] em3: Ethernet address: 00:15:17:c6:79:63 pcib6: irq 32 at device 9.0 on pci0 pci6: on pcib6 pcib7: irq 33 at device 10.0 on pci0 pci7: on pcib7 pci0: at device 16.0 (no driver attached) pci0: at device 16.1 (no driver attached) pci0: at device 17.0 (no driver attached) pci0: at device 17.1 (no driver attached) pci0: at device 20.0 (no driver attached) pci0: at device 20.1 (no driver attached) pci0: at device 20.2 (no driver attached) pci0: at device 20.3 (no driver attached) pci0: at device 22.0 (no driver attached) pci0: at device 22.1 (no driver attached) pci0: at device 22.2 (no driver attached) pci0: at device 22.3 (no driver attached) pci0: at device 22.4 (no driver attached) pci0: at device 22.5 (no driver attached) pci0: at device 22.6 (no driver attached) pci0: at device 22.7 (no driver attached) uhci0: port 0x40e0-0x40ff irq 19 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x40c0-0x40df irq 19 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x40a0-0x40bf irq 19 at device 26.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xb1c22000-0xb1c223ff irq 19 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: on usb3 uhub3: 6 ports with 6 removable, self powered pcib8: irq 16 at device 28.0 on pci0 pci8: on pcib8 pcib9: irq 16 at device 28.4 on pci0 pci9: on pcib9 vgapci0: mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci9 pcib10: irq 17 at device 28.5 on pci0 pci10: on pcib10 uhci3: port 0x4080-0x409f irq 16 at device 29.0 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0x4060-0x407f irq 16 at device 29.1 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: port 0x4040-0x405f irq 16 at device 29.2 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: on uhci5 usb6: USB revision 1.0 uhub6: on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: mem 0xb1c21000-0xb1c213ff irq 16 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: on ehci1 usb7: USB revision 2.0 uhub7: on usb7 uhub7: 6 ports with 6 removable, self powered pcib11: at device 30.0 on pci0 pci11: on pcib11 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x4108-0x410f,0x4114-0x4117,0x4100-0x4107,0x4110-0x4113,0x4020-0x403f mem 0xb1c20000-0xb1c207ff irq 18 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.20 controller with 6 ports detected ata2: on atapci0 ata2: [ITHREAD] ata3: on atapci0 ata3: port not implemented ata3: [ITHREAD] ata4: on atapci0 ata4: port not implemented ata4: [ITHREAD] ata5: on atapci0 ata5: [ITHREAD] ata6: on atapci0 ata6: port not implemented ata6: [ITHREAD] ata7: on atapci0 ata7: port not implemented ata7: [ITHREAD] pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio1: type 16550A, console sio1: [FILTER] ipmi0: port 0xca2,0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi cpu0: on acpi0 est0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 device_attach: acpi_perf1 attach returned 6 device_attach: acpi_perf1 attach returned 6 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr f device_attach: est1 attach returned 6 p4tcc1: on cpu1 cpu2: on acpi0 est2: on cpu2 p4tcc2: on cpu2 cpu3: on acpi0 device_attach: acpi_perf3 attach returned 6 device_attach: acpi_perf3 attach returned 6 est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr f device_attach: est3 attach returned 6 p4tcc3: on cpu3 ipmi1: on isa0 device_attach: ipmi1 attach returned 16 pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcc7ff pnpid ORM0000 on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] ppc0: parallel port not found. sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: on uhub2 kbd0 at ukbd0 ums0: on uhub2 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 uhub8: on uhub5 uhub8: 4 ports with 4 removable, self powered ukbd1: on uhub8 kbd2 at ukbd1 uhid0: on uhub8 ums0: on uhub8 ums0: 5 buttons and Z dir. ums1: on uhub8 ums1: X report 0x0002 not supported device_attach: ums1 attach returned 6 Timecounters tick every 1.000 msec ad4: 238475MB at ata2-master SATA300 acd0: DVDROM at ata5-master SATA150 ipmi0: GEOM_JOURNAL: Journal 173943913: ad4s1a contains data. GEOM_JOURNAL: Journal 173943913: ad4s1a contains journal.IPMI device rev. 1, firmware rev. 0.2, version 2.0 GEOM_JOURNAL: Journal ad4s1a clean. ipmi0: Number of channels 2 ipmi0: Attached watchdog lapic4: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! lapic6: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic2: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! GEOM_JOURNAL: Journal 3858085586: ad4s1d contains data. GEOM_JOURNAL: Journal 3858085586: ad4s1d contains journal. GEOM_JOURNAL: Journal ad4s1d clean. WARNING: Expected rawoffset 0, found 63 Trying to mount root from ufs:/dev/ad4s1a.journal -- Charles Owens Great Bay Software, Inc.