Date: Thu, 05 Feb 1998 00:23:43 -0600 (CST) From: David Vondrasek <dallas.tex@airmail.net> To: questions@FreeBSD.ORG, Bill Knox <bik@watertower.com> (Knox, Bill), little.bill@airmail.net Subject: Networking 2 BSD box's Message-ID: <XFMail.980205003656.dallas.tex@airmail.net>
next in thread | raw e-mail | index | archive | help
HELP !! :P Sory had to let out frustation..
I have 2 Box's, Both with 2.2.5-RELEASE
Both have NE-2000 Cards
PLEASE !! show me were to look to getese thinks to see each other. Or tell me
the main settings I have to have enabled.
Files *I* THINK are correct. Please see below:
10.124.239.12 Has a modem with auto PPP dialup if it matters.
I need access for the internet fron the 10.124.239.11 box though the
10.124.239.12 box (gateway i guess) a WIN95 Box is going online for access to
the Internet also.
/ect/host.conf
-------------------
# $Id: host.conf,v 1.2 1993/11/07 01:02:57 wollman Exp $
# Default is to use the nameserver first
#bind
# If that doesn't work, then try the /etc/hosts file
#hosts
# If you have YP/NIS configured, uncomment the next line
# nis
hosts
bind
/etc/resolv.conf
--------
domain my.domain
nameserver 204.178.72.1
nameserver 204.178.72.30
/etc/ppp/ppp.conf
---------------------
dial-ia
set device /dev/cuaa1
set speed 57600
set parity none
# set log Phase Chat Connect Carrier hdlc LCP IPCP CCP tun
disable lqr
deny lqr
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT+MS=11,0,9600,33600
OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT"
set phone 8650073
set login "TIMEOUT 4 login:-\\r\\d\\c-login:-\\r\\c-login: \\d\\U word: \\P"
deny chap
disable chap
accept pap
set authname XXXXXX
set authkey XXXXXX
set timeout 3000000
set debug chat phase
set ifaddr 127.1.1.1/0 127.2.2.2/0 255.255.255.0
add 0 0 127.2.2.2
/etc/ppp/ppp.linkup
-------------
dial-ia:
delete ALL
add 0 0 HISADDR
MYADDR:
add 0 0 HISADDR
/etc/start_if.tun0
-------------------
ppp -auto -alias dial-ia
/etc/rc.conf
---------------
#!/bin/sh
#
# This is rc.conf - a file full of useful variables that you can set
# to change the default startup behavior of your system.
#
# All arguments must be in double or single quotes.
#
# $Id: rc.conf,v 1.1.2.27 1997/10/18 10:07:26 jkh Exp $
##############################################################
### Important initial Boot-time options #####################
##############################################################
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
apm_enable="NO" # Set to YES if you want APM enabled.
pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
##############################################################
### Network configuration sub-section ######################
##############################################################
### Basic network options: ###
hostname="stumbleinn.dyn.ml.org" # Set this!
nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
firewall_enable="NO" # Set to YES to enable firewall functionality
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
firewall_quiet="NO" # Set to YES to suppress rule display
tcp_extensions="YES" # Allow RFC1323 & RFC1644 extensions (or NO).
network_interfaces="ed0 lo0 tun0 " # List of network interfaces (lo0 is
loopback).
ifconfig_ed0="inet 10.124.239.12 netmask 255.255.255.0"
ifconfig_lo0="inet localhost" # default loopback device configuration.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
ifconfig_tun0=
### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable="YES" # Run syslog daemon (or NO).
syslogd_flags="" # Flags to syslogd (if enabled).
inetd_enable="YES" # Run the network daemon displatcher (or NO).
inetd_flags="" # Optional flags to inetd.
named_enable="NO" # Run named, the DNS server (or NO).
named_flags="-b /etc/namedb/named.boot" # Flags to named (if enabled).
kerberos_server_enable="NO" # Run a kerberos master server (or NO).
rwhod_enable="NO" # Run the rwho daemon (or NO).
amd_enable="NO" # Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
nfs_client_enable="NO" # This host is an NFS client (or NO).
nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
nfs_server_enable="NO" # This host is an NFS server (or NO).
nfs_server_flags="-u -t 4" # Flags to nfsd (if enabled).
mountd_flags="-r" # Flags to mountd (if NFS server enabled).
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES" # Run the portmapper service (or NO).
portmap_flags="" # Flags to portmap (if enabled).
xtend_enable="NO" # Run the X-10 power controller daemon.
xtend_flags="" # Flags to xtend (if enabled).
### Network Time Services options: ###
timed_enable="YES" # Run the time daemon (or NO).
timed_flags="" # Flags to timed (if enabled).
ntpdate_enable="NO" # Run the ntpdate to sync time (or NO).
ntpdate_flags="" # Flags to ntpdate (if enabled).
xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO).
xntpd_flags="" # Flags to xntpd (if enabled).
tickadj_enable="NO" # Run tickadj (or NO).
tickadj_flags="-Aq" # Flags to tickadj (if enabled).
# Network Information Services (NIS) options: ###
nis_client_enable="NO" # We're an NIS client (or NO).
nis_client_flags="" # Flags to ypbind (if enabled).
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
nis_ypset_flags="" # Flags to ypset (if enabled).
nis_server_enable="NO" # We're an NIS server (or NO).
nis_server_flags="" # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
### Network routing options: ###
defaultrouter="YES" # Set to default gateway (or NO).
static_routes="" # Set to static route list (or leave empty).
gateway_enable="YES" # Set to YES if this host will be a gateway.
router_enable="YES" # Set to YES to enable a routing daemon.
router="routed" # Name of routing daemon to use if enabled.
router_flags="-q" # Flags for routing daemon.
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
ipxrouted_flags="" # Flags for IPX routing daemon.
arpproxy_all="" # obsolete kernel option ARP_PROXY_ALL equiv.
##############################################################
### System console options #################################
##############################################################
keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate="fast" # keyboard rate to: slow, normal, fast (or NO).
keybell="NO" # bell to duration.pitch or normal or visual (or NO).
keychange="NO" # function keys default values (or NO).
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime="600" # blank time (in seconds) or "NO" to turn it off.
saver="daemon" # screen saver desired: blank/green/snake/star/NO
moused_type="NO" # See man page for rc.conf(5) for available settings.
moused_port="/dev/cuaa0" # Set to your mouse port (required if mousetype set).
moused_flags="" # Any additional flags to moused.
##############################################################
### Miscellaneous administrative options ###################
##############################################################
cron_enable="YES" # Run the periodic job daemon.
lpd_enable="YES" # Run the line printer daemon.
lpd_flags="" # Flags to lpd (if enabled).
sendmail_enable="YES" # Run the sendmail daemon (or NO).
sendmail_flags="-bd -q30m" # -bd is pretty mandatory.
dumpdev="NO" # Device name to crashdump to (if enabled).
check_quotas="NO" # Check quotas (or NO).
accounting_enable="NO" # Turn on process accounting (or NO).
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
linux_enable="YES" # Linux emulation loaded at startup (or NO).
rand_irqs="NO" # Stir the entropy pool (eg: "5 11" or NO).
##############################################################
### Allow local configuration override at the very end here ##
##############################################################
if [ -f /etc/rc.conf.local ]; then
. /etc/rc.conf.local
fi
---
----------------------------------
David Vondrasek
E-Mail: David Vondrasek <dallas.tex@airmail.net>
Date: 05-Feb-98
Time: 00:23:43
----------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.980205003656.dallas.tex>