Date: Wed, 22 Mar 2006 20:37:54 +0000 From: Tofik Suleymanov <tofik@oxygen.az> To: questions@freebsd.org Cc: rauf@kuliyev.com Subject: problem with mpt Message-ID: <4421B5A2.2040500@oxygen.az>
next in thread | raw e-mail | index | archive | help
Hello folks, HP DL 140 box with freebsd 6.1-PRERELEASE installed: FreeBSD xxx.xxx.com 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: Thu Feb 23 09:23:17 EST 2006 root@xxx.xxx.com:/usr/obj/usr/src/sys/GENERIC i386 When i do intensive scp over network, or e.g. issue pretty large SELECT/UPDATE in PostgreSQL i get perfomance degradation.Need to say, that i've tried 6.0-RELEASE also, but no success. I've been suspecting cards to be somehow broken and therefore tried this on other two identical boxes (same harddware, same os) but again, no success. Below are the logs in /var/log/messages: Mar 17 12:33:21 xxx kernel: mpt0: Request 0xc4bbf3d8 Timed out. Mar 17 12:33:21 xxx kernel: mpt0: Request 0xc4bbf4c8 Timed out. Mar 17 12:33:21 xxx kernel: mpt0: Request 0xc4bbf540 Timed out. Mar 17 12:33:21 xxx kernel: mpt0: Request 0xc4bc0008 Timed out. Mar 17 12:33:21 xxx kernel: mpt0: Request 0xc4bbf630 Timed out. Mar 17 12:33:21 xxx kernel: mpt0: Request 0xc4bc0350 Timed out. Mar 17 12:38:37 xxx kernel: mpt0: Request 0xc4bc0530 Timed out. Mar 17 12:38:37 xxx kernel: mpt0: Request 0xc4bc02b0 Timed out. Mar 17 12:38:37 xxx kernel: mpt0: mpt_recover_commands: Abort timed-out.Resetting controller Mar 17 12:38:37 xxx kernel: mpt0: soft reset failed: ack timeout Mar 17 12:38:37 xxx kernel: mpt0: WARNING - Failed hard reset! Trying to initialize anyway. Mar 17 12:38:37 xxx kernel: mpt0: Unhandled Event Notify Frame. Event 0xc086254d. Mar 17 12:38:37 xxx kernel: (da0:mpt0:0:0:0): WRITE(10). CDB: 2a 0 4 37 c7 8f 0 0 20 0 Mar 17 12:38:37 xxx kernel: (da0:mpt0:0:0:0): CAM Status: SCSI Status Error Mar 17 12:38:37 xxx kernel: (da0:mpt0:0:0:0): SCSI Status: Check Condition Mar 17 12:38:37 xxx kernel: (da0:mpt0:0:0:0): UNIT ATTENTION asc:29,2 Mar 17 12:38:37 xxx kernel: (da0:mpt0:0:0:0): Scsi bus reset occurred Mar 17 12:38:37 xxx kernel: (da0:mpt0:0:0:0): Retrying Command (per Sense Data) here is the dmesg: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-PRERELEASE #0: Thu Feb 23 09:23:17 EST 2006 root@radius.gltcall.com:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2822.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE ,SSE2,SS,HTT,TM,PBE> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> AMD Features=0x20100000<NX,LM> Hyperthreading: 2 logical CPUs real memory = 1073152000 (1023 MB) avail memory = 1041223680 (992 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 25 Entries> on motherboard pci0: <PCI bus> on pcib0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <PCIBIOS PCI-PCI bridge> irq 5 at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCIBIOS PCI-PCI bridge> irq 5 at device 4.0 on pci0 pci2: <PCI bus> on pcib2 bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xdd100000-0xdd10ffff irq 5 at device 0.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:15:60:5f:42:0c pcib3: <PCIBIOS PCI-PCI bridge> irq 5 at device 5.0 on pci0 pci3: <PCI bus> on pcib3 bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xdd200000-0xdd20ffff irq 5 at device 0.0 on pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:15:60:5f:42:0d pcib4: <PCIBIOS PCI-PCI bridge> irq 5 at device 6.0 on pci0 pci4: <PCI bus> on pcib4 pcib5: <PCIBIOS PCI-PCI bridge> at device 0.0 on pci4 pci5: <PCI bus> on pcib5 pci4: <base peripheral, interrupt controller> at device 0.1 (no driver attached) pcib6: <PCIBIOS PCI-PCI bridge> at device 0.2 on pci4 pci6: <PCI bus> on pcib6 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0xdd420000-0xdd43ffff,0xdd400000-0xdd41ffff irq 5 at device 3.0 on pci6 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.2.14.0 mpt0: Unhandled Event Notify Frame. Event 0xa. pci4: <base peripheral, interrupt controller> at device 0.3 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 5 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq 3 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xdd001000-0xdd0013ff irq 11 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pcib7: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci7: <PCI bus> on pcib7 pci7: <display, VGA> at device 1.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xcefff,0xdc000-0xdffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) fdc1: No FDOUT register! Timecounter "TSC" frequency 2822509403 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle da0 at mpt0 bus 0 target 0 lun 0 da0: <COMPAQ BF03698578 HPB2> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C) Trying to mount root from ufs:/dev/da0s1a bge0: link state changed to UP Thank you, Tofik Suleymanov
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4421B5A2.2040500>