From owner-freebsd-current@FreeBSD.ORG  Fri Oct  3 12:09:33 2003
Return-Path: <owner-freebsd-current@FreeBSD.ORG>
Delivered-To: freebsd-current@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id D3B2416A4B3
	for <freebsd-current@freebsd.org>;
	Fri,  3 Oct 2003 12:09:33 -0700 (PDT)
Received: from brmea-mail-2.sun.com (brmea-mail-2.Sun.COM [192.18.98.43])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 358F043FE9
	for <freebsd-current@freebsd.org>;
	Fri,  3 Oct 2003 12:09:27 -0700 (PDT)
	(envelope-from tomppa@finland.sun.com)
Received: from sunfin.Finland.Sun.COM ([129.159.101.10])
	by brmea-mail-2.sun.com (8.12.10/8.12.9) with ESMTP id h93J9LaV007948;
	Fri, 3 Oct 2003 13:09:22 -0600 (MDT)
Received: from ultrahot.Finland.Sun.COM (ultrahot [129.159.101.87])
	ESMTP id h93J9JcP024792;	Fri, 3 Oct 2003 22:09:19 +0300 (EEST)
Received: from ultrahot.Finland.Sun.COM (localhost [127.0.0.1])
	h93J9JLx022784;	Fri, 3 Oct 2003 22:09:19 +0300 (EEST)
Received: (from tomppa@localhost)h93J9Ix5022781;
	Fri, 3 Oct 2003 22:09:18 +0300 (EEST)
From: Tomi Vainio - Sun Finland <Tomi.Vainio@Sun.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <16253.51542.78986.21384@ultrahot.finland.sun.com>
Date: Fri, 3 Oct 2003 22:09:10 +0300
To: freebsd-current@freebsd.org
In-Reply-To: <16249.10554.799238.754225@ultrahot.finland.sun.com>
References: <16247.52338.785563.48087@ultrahot.finland.sun.com>
	<20030929091727.Y52567@carver.gumbysoft.com>
	<16249.10554.799238.754225@ultrahot.finland.sun.com>
X-Mailer: VM 7.17 under 21.4 (patch 9) "Informed Management" XEmacs Lucid
cc: Dag-Erling =?iso-8859-1?q?Sm=F8rgrav?= <des@des.no>
cc: Poul-Henning Kamp <phk@phk.freebsd.dk>
cc: Lucas James <Lucas.James@LDJcs.Com.Au>
Subject: problematic ata story continues
X-BeenThere: freebsd-current@freebsd.org
X-Mailman-Version: 2.1.1
Precedence: list
Reply-To: Tomi.Vainio@Sun.COM
List-Id: Discussions about the use of FreeBSD-current
	<freebsd-current.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-current>,
	<mailto:freebsd-current-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-current>
List-Post: <mailto:freebsd-current@freebsd.org>
List-Help: <mailto:freebsd-current-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-current>,
	<mailto:freebsd-current-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Fri, 03 Oct 2003 19:09:34 -0000

Hi,

Story goes on and once again we replaced mobo with new one and supped
latest source.  At last we could build vinum volume but then we booted
system with new kernel after make world.  Now we have lost both slave
disks on secondary ata controller.  With old kernel we can still see
these disks.  What's broken this time?

  Tomppa

1.txt:ad0: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata0-master
1.txt:ad1: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata0-slave
1.txt:ad2: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata1-master
1.txt:ad3: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata1-slave
1.txt:ad4: <ST3120023A/3.31> ATA-6 disk at ata2-master
1.txt:ad6: <ST3120023A/3.31> ATA-6 disk at ata3-master

2.txt:ad0: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata0-master
2.txt:ad1: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata0-slave
2.txt:ad2: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata1-master
2.txt:ad3: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata1-slave
2.txt:ad4: <ST3120023A/3.31> ATA-6 disk at ata2-master
2.txt:ad5: <ST3120023A/3.31> ATA-6 disk at ata2-slave
2.txt:ad6: <ST3120023A/3.31> ATA-6 disk at ata3-master
2.txt:ad7: <ST3120023A/3.31> ATA-6 disk at ata3-slave


*** 1.txt ***
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel] in 8 seconds... Booting [/boot/kernel/kernel]...               
|/-\|/-\|/-\|/-\|/-\|/-\|/boot/kernel/acpi.ko text=0x3b504 /-\|/-\|/-\|/-\data=0x16cc+0xee0 |syms=[0x4+0x5c10/+0x4+0x7a31-\]
|/-\|/-SMAP type=01 base=0000000000000000 len=000000000009e800
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=02 base=000000000009e800 len=0000000000001800
SMAP type=01 base=0000000000100000 len=000000001fef0000
SMAP type=03 base=000000001fff3000 len=000000000000d000
SMAP type=04 base=000000001fff0000 len=0000000000003000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Thu Oct  2 18:38:43 EEST 2003
    @iki.fi:/u/FreeBSD/src/sys/i386/compile/TIIKELI
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0838000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08381f4.
Calibrating clock(s) ... i8254 clock: 1193203 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2004553448 Hz
CPU: Intel(R) Celeron(R) CPU 2.00GHz (2004.55-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000001f6c9fff, 514473984 bytes (125604 pages)
avail memory = 511868928 (488 MB)
bios32: Found BIOS32 Service Directory header at 0xc00facf0
bios32: Entry = 0xfb170 (c00fb170)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb1a0
pnpbios: Found PnP BIOS data at 0xc00fbbe0
pnpbios: Entry = f0000:bc10  Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AOpen  AWRDACPI> on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25708086)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdea0
PCI-Only Interrupts: 9 10 11 12
Location  Bus Device Pin  Link  IRQs
slot 1      2    8    A   0x68  3 4 5 7 9 10 11 12 14 15
slot 1      2    8    B   0x69  3 4 5 7 9 10 11 12 14 15
slot 1      2    8    C   0x6a  3 4 5 7 9 10 11 12 14 15
slot 1      2    8    D   0x6b  3 4 5 7 9 10 11 12 14 15
slot 2      2    4    A   0x62  3 4 5 7 9 10 11 12 14 15
slot 2      2    4    B   0x63  3 4 5 7 9 10 11 12 14 15
slot 2      2    4    C   0x68  3 4 5 7 9 10 11 12 14 15
slot 2      2    4    D   0x69  3 4 5 7 9 10 11 12 14 15
slot 3      2    5    A   0x63  3 4 5 7 9 10 11 12 14 15
slot 3      2    5    B   0x68  3 4 5 7 9 10 11 12 14 15
slot 3      2    5    C   0x69  3 4 5 7 9 10 11 12 14 15
slot 3      2    5    D   0x6a  3 4 5 7 9 10 11 12 14 15
slot 4      2    9    A   0x68  3 4 5 7 9 10 11 12 14 15
slot 4      2    9    B   0x69  3 4 5 7 9 10 11 12 14 15
slot 4      2    9    C   0x6a  3 4 5 7 9 10 11 12 14 15
slot 4      2    9    D   0x6b  3 4 5 7 9 10 11 12 14 15
slot 5      2   10    A   0x69  3 4 5 7 9 10 11 12 14 15
slot 5      2   10    B   0x6a  3 4 5 7 9 10 11 12 14 15
slot 5      2   10    C   0x6b  3 4 5 7 9 10 11 12 14 15
slot 5      2   10    D   0x60  3 4 5 7 9 10 11 12 14 15
slot 6      2   11    A   0x6a  3 4 5 7 9 10 11 12 14 15
slot 6      2   11    B   0x6b  3 4 5 7 9 10 11 12 14 15
slot 6      2   11    C   0x60  3 4 5 7 9 10 11 12 14 15
slot 6      2   11    D   0x61  3 4 5 7 9 10 11 12 14 15
slot 7      2   12    A   0x6b  3 4 5 7 9 10 11 12 14 15
slot 7      2   12    B   0x60  3 4 5 7 9 10 11 12 14 15
slot 7      2   12    C   0x61  3 4 5 7 9 10 11 12 14 15
slot 7      2   12    D   0x62  3 4 5 7 9 10 11 12 14 15
slot 8      2    7    A   0x6a  3 4 5 7 9 10 11 12 14 15
slot 8      2    7    B   0x6b  3 4 5 7 9 10 11 12 14 15
slot 8      2    7    C   0x60  3 4 5 7 9 10 11 12 14 15
slot 8      2    7    D   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0   30    A   0x60  3 4 5 7 9 10 11 12 14 15
embedded    0   30    B   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0   30    C   0x62  3 4 5 7 9 10 11 12 14 15
embedded    0   30    D   0x63  3 4 5 7 9 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 7 9 10 11 12 14 15
embedded    0   31    B   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0   31    C   0x60  3 4 5 7 9 10 11 12 14 15
embedded    0   31    D   0x63  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x62  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x63  3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.3
1.2
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.3
1.0
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.3
1.1
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.2
9.0
\_SB_.PCI0.LNKD irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.2
9.1
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.2
9.2
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.2
9.3
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.1
.0
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.1
.1
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.1
.2
\_SB_.PCI0.LNKD irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.1
.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.3
1.2
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.3
1.0
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.3
1.1
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.2
9.0
\_SB_.PCI0.LNKD irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.2
9.1
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.2
9.2
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.2
9.3
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.1
.0
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.1
.1
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.1
.2
\_SB_.PCI0.LNKD irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 0.1
.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e8000000, size 27, enabled
found->	vendor=0x8086, dev=0x2570, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2571, revid=0x02
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x244e, revid=0xc2
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24d0, revid=0x02
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00000000, size  3, enabled
	map[14]: type 4, range 32, base 00000000, size  2, enabled
	map[18]: type 4, range 32, base 00000000, size  3, enabled
	map[1c]: type 4, range 32, base 00000000, size  2, enabled
	map[20]: type 4, range 32, base 0000f000, size  4, enabled
found->	vendor=0x8086, dev=0x24db, revid=0x02
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00005000, size  5, enabled
pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LNKB)
pcib0: slot 31 INTB is routed to irq 10
found->	vendor=0x8086, dev=0x24d3, revid=0x02
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
agp0: <Intel 82865 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 o
n pci0
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xfff00000-0xfffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xa000-0xbfff
pcib2:   memory decode     0xf0000000-0xfbffffff
pcib2:   prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\_SB_.PCI0.LNKE irq   0: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.8
.0
\_SB_.PCI0.LNKF irq   0: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.8
.1
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.8
.2
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.8
.3
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.4
.0
\_SB_.PCI0.LNKD irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.4
.1
\_SB_.PCI0.LNKE irq   0: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.4
.2
\_SB_.PCI0.LNKF irq   0: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.4
.3
\_SB_.PCI0.LNKD irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.5
.0
\_SB_.PCI0.LNKE irq   0: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.5
.1
\_SB_.PCI0.LNKF irq   0: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.5
.2
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.5
.3
\_SB_.PCI0.LNKE irq   0: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.9
.0
\_SB_.PCI0.LNKF irq   0: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.9
.1
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.9
.2
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.9
.3
\_SB_.PCI0.LNKF irq   0: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
0.0
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
0.1
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
0.2
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
0.3
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
1.0
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
1.1
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
1.2
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
1.3
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
2.0
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
2.1
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
2.2
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
2.3
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.7
.0
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.7
.1
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.7
.2
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.7
.3
---- before setting priority for links ------------
\_SB_.PCI0.LNKE:
	interrupts:	     3     4     5     7     9    10    11    12    14  
  15
	penalty:	  1990  1990   990  1990  1690  1890  2190  2590 10990 1
0990
	references:	4
	priority:	0
\_SB_.PCI0.LNKF:
	interrupts:	     3     4     5     7     9    10    11    12    14  
  15
	penalty:	  1990  1990   990  1990  1690  1890  2190  2590 10990 1
0990
	references:	5
	priority:	0
---- before fixup boot-disabled links -------------
\_SB_.PCI0.LNKF:
	interrupts:	     3     4     5     7     9    10    11    12    14  
  15
	penalty:	  1990  1990   990  1990  1690  1890  2190  2590 10990 1
0990
	references:	5
	priority:	18650
\_SB_.PCI0.LNKE:
	interrupts:	     3     4     5     7     9    10    11    12    14  
  15
	penalty:	  1990  1990   990  1990  1690  1890  2190  2590 10990 1
0990
	references:	4
	priority:	14920
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.PCI0.LNKE irq   5: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.8
.0
\_SB_.PCI0.LNKF irq   5: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.8
.1
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.8
.2
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.8
.3
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.4
.0
\_SB_.PCI0.LNKD irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.4
.1
\_SB_.PCI0.LNKE irq   5: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.4
.2
\_SB_.PCI0.LNKF irq   5: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.4
.3
\_SB_.PCI0.LNKD irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.5
.0
\_SB_.PCI0.LNKE irq   5: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.5
.1
\_SB_.PCI0.LNKF irq   5: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.5
.2
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.5
.3
\_SB_.PCI0.LNKE irq   5: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.9
.0
\_SB_.PCI0.LNKF irq   5: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.9
.1
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.9
.2
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.9
.3
\_SB_.PCI0.LNKF irq   5: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
0.0
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
0.1
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
0.2
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
0.3
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
1.0
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
1.1
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
1.2
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
1.3
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
2.0
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
2.1
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
2.2
\_SB_.PCI0.LNKC irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.1
2.3
\_SB_.PCI0.LNK0 irq  12: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.7
.0
\_SB_.PCI0.LNK1 irq   9: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.7
.1
\_SB_.PCI0.LNKA irq  11: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.7
.2
\_SB_.PCI0.LNKB irq  10: [  3  4  5  7  9 10 11 12 14 15] low,level,sharable 2.7
.3
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
	map[10]: type 4, range 32, base 0000a000, size  8, enabled
	map[14]: type 1, range 32, base f8020000, size 12, enabled
pcib2: matched entry for 2.4.INTA (source \_SB_.PCI0.LNKC)
pcib2: slot 4 INTA is routed to irq 11
found->	vendor=0x9004, dev=0x8178, revid=0x00
	bus=2, slot=4, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=11
	map[10]: type 4, range 32, base 0000a400, size  3, enabled
	map[14]: type 4, range 32, base 0000a800, size  2, enabled
	map[18]: type 4, range 32, base 0000ac00, size  3, enabled
	map[1c]: type 4, range 32, base 0000b000, size  2, enabled
	map[20]: type 4, range 32, base 0000b400, size  6, enabled
	map[24]: type 1, range 32, base f8000000, size 17, enabled
pcib2: matched entry for 2.5.INTA (source \_SB_.PCI0.LNKD)
pcib2: slot 5 INTA is routed to irq 10
found->	vendor=0x105a, dev=0x4d30, revid=0x02
	bus=2, slot=5, func=0
	class=01-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 1  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000b800, size  6, enabled
pcib2: matched entry for 2.11.INTA (source \_SB_.PCI0.LNK0)
pcib2: slot 11 INTA is routed to irq 12
found->	vendor=0x10b7, dev=0x9050, revid=0x00
	bus=2, slot=11, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=12
	map[10]: type 1, range 32, base f0000000, size 25, enabled
pcib2: matched entry for 2.12.INTA (source \_SB_.PCI0.LNK1)
pcib2: slot 12 INTA is routed to irq 9
found->	vendor=0x5333, dev=0x88f0, revid=0x00
	bus=2, slot=12, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0083, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=9
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xa000-0xa0ff mem 0xf8020000-0xf802
0fff irq 11 at device 4.0 on pci2
ahc0: Defaulting to MEMIO off
pcib2: device ahc0 requested decoded I/O range 0xa000-0xa0ff
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable is present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 448 instructions downloaded
ahc0: Features 0x5, Bugs 0x25, Flags 0x20481540
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
atapci0: <Promise PDC20267 UDMA100 controller> port 0xb400-0xb43f,0xb000-0xb003,
0xac00-0xac07,0xa800-0xa803,0xa400-0xa407 mem 0xf8000000-0xf801ffff irq 10 at de
vice 5.0 on pci2
pcib2: device atapci0 requested decoded I/O range 0xb400-0xb43f
atapci0: [MPSAFE]
pcib2: device atapci0 requested decoded I/O range 0xa400-0xa407
pcib2: device atapci0 requested decoded I/O range 0xa800-0xa803
pcib2: device atapci0 requested decoded I/O range 0xa802-0xa802
ata2: reset tp1 mask=03 ostat0=50 ostat1=50
ata2-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata2-slave:  stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata2-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata2-slave:  stat=0x10 err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER>
ata2: at 0xa400 on atapci0
ata2: [MPSAFE]
pcib2: device atapci0 requested decoded I/O range 0xac00-0xac07
pcib2: device atapci0 requested decoded I/O range 0xb000-0xb003
pcib2: device atapci0 requested decoded I/O range 0xb002-0xb002
ata3: reset tp1 mask=03 ostat0=50 ostat1=50
ata3-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata3-slave:  stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata3-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata3-slave:  stat=0x10 err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER>
ata3: at 0xac00 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xb800-0xb83f irq 12 at device 11.0 
on pci2
pcib2: device xl0 requested decoded I/O range 0xb800-0xb83f
xl0: using port I/O
xl0: Ethernet address: 00:60:08:0a:d4:1d
xl0: media options word: e040
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
pci2: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-
0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
vt: vt0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcf000-0xd0fff,0xc8000-0xcefff,0xc0000-0xc7fff on 
isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2004553448 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata1: spurious interrupt - status=0x50 error=0x01
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA100 on Intel ICH5 chip
GEOM: create disk ad0 dp=0xc48f9e70
ad0: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata0-master
ad0: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 160039240704 end 160039272959
ad1: setting UDMA100 on Intel ICH5 chip
GEOM: create disk ad1 dp=0xc48f9a70
ad1: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata0-slave
ad1: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
GEOM: Configure ad0s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad0s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad0s1d, start 0 length 160039240704 end 160039240703
GEOM: new disk ad1
ata1-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 160039240704 end 160039272959
ad2: setting UDMA100 on Intel ICH5 chip
GEOM: create disk ad2 dp=0xc48f9270
ad2: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata1-master
ad2: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
GEOM: Configure ad1s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad1s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad1s1d, start 0 length 160039240704 end 160039240703
GEOM: new disk ad2
ar: FreeBSD check1 failed
ad3: setting UDMA100 on Intel ICH5 chip
GEOM: create disk ad3 dp=0xc48fe070
ad3: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata1-slave
ad3: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad3: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 160039240704 end 160039272959
ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
GEOM: new disk ad3
GEOM: Configure ad2s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad2s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad2s1d, start 0 length 160039240704 end 160039240703
ad4: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad4 dp=0xc48fa770
ad4: <ST3120023A/3.31> ATA-6 disk at ata2-master
ad4: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad3s1, start 32256 length 160039240704 end 160039272959
ar: Promise check1 failed
GEOM: new disk ad4
ata3-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
GEOM: Configure ad3s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad3s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad3s1d, start 0 length 160039240704 end 160039240703
ad6: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad6 dp=0xc48fe170
ad6: <ST3120023A/3.31> ATA-6 disk at ata3-master
ad6: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 120031478784 end 120031511039
ar: Promise check1 failed
Waiting 8 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
GEOM: new disk ad6
GEOM: Configure ad4s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad4s1d, start 0 length 120031478784 end 120031478783
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad6s1, start 32256 length 120031478784 end 120031511039
GEOM: Configure ad6s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad6s1d, start 0 length 120031478784 end 120031478783
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period c, offset 8
(ahc0:A:0:0): Received SDTR period c, offset 8
	Filtered to period c, offset 8
ahc0: target 0 synchronous at 20.0MHz, offset = 0x8
GEOM: create disk da0 dp=0xc4913050
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device 
pass0: Serial Number LA691693
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enable
d
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device 
da0: Serial Number LA691693
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
GEOM: new disk da0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679
GEOM: Configure da0s1a, start 524288000 length 1073741824 end 1598029823
GEOM: Configure da0s1b, start 0 length 524288000 end 524287999
GEOM: Configure da0s1c, start 0 length 9097127424 end 9097127423
GEOM: Configure da0s1d, start 1598029824 length 7499097600 end 9097127423
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point.
kernel dumps on /dev/da0s1b
vinum: loaded
vinum: reading configuration from /dev/ad0s1d
vinum: updating configuration from /dev/ad1s1d
vinum: updating configuration from /dev/ad2s1d
vinum: updating configuration from /dev/ad3s1d
vinum: updating configuration from /dev/ad4s1d
vinum: updating configuration from /dev/ad6s1d
swapon: adding /dev/da0s1b as swap device
Starting file system checks:
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 262489 free (15337 frags, 30894 blocks, 3.0% fragmentation)
/dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1d: clean, 1765912 free (24888 frags, 217628 blocks, 0.7% fragmentation
)
Setting hostname: iki.fi.
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	options=8<VLAN_MTU>
	inet 193.64.243.175 netmask 0xffffffe0 broadcast 193.64.243.191
	inet6 fe80::260:8ff:fe0a:d41d%xl0 prefixlen 64 tentative scopeid 0x1 
	ether 00:60:08:0a:d4:1d
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
	inet 127.0.0.1 netmask 0xff000000 
add net default: gateway 193.64.243.190
Additional routing options:.
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
net.inet6.ip6.forwarding: 0 -> 0
ifconfig: prefixlen:260:8ff:fe0a:d41d: bad value
ifconfig: 64:260:8ff:fe0a:d41d: bad value
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	options=8<VLAN_MTU>
	inet6 fe80::260:8ff:fe0a:d41d%xl0 prefixlen 64 tentative scopeid 0x1 
	inet6 2001:670:a0:11:: prefixlen 64 tentative 
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
add net fe80::: gateway ::1
add net ff02::: gateway ::1
IPv4 mapped IPv6 address support=NO
hw.bus.devctl_disable: 0 -> 1
Mounting NFS file systems:.
Starting syslogd.
Oct  3 21:50:39 tiikeli syslogd: kernel boot file is /boot/kernel/kernel
Checking for core dump...
savecore: no dumps found
Starting ntpdate.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting usbd.
No USB host controllers found
Starting local daemons:.
Updating motd.
Starting ntpd.
Configuring syscons: blanktime.
Starting sshd.
Initial i386 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization: proftpd Samba (skipping setiathome.sh, not executa
ble).
Additional TCP options:.
Starting background file system checks in 60 seconds.

Fri Oct  3 21:50:56 EEST 2003
Console: serial port

*** 2.txt ***
OK unload
OK load /boot/kernel.old/kernel
/boot/kernel.old/kernel text=0x2e50e4 data=0x2e854+0x51be8 syms=[0x4+0x39f60+0x4
+0x46e72]
OK boot
/boot/kernel/acpi.ko text=0x3b504 data=0x16cc+0xee0 syms=[0x4+0x5c10+0x4+0x7a3]-
SMAP type=01 base=0000000000000000 len=000000000009e800
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=02 base=000000000009e800 len=0000000000001800
SMAP type=01 base=0000000000100000 len=000000001fef0000
SMAP type=03 base=000000001fff3000 len=000000000000d000
SMAP type=04 base=000000001fff0000 len=0000000000003000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Sat Sep 13 01:27:45 EEST 2003
    @iki.fi:/u/FreeBSD/src/sys/i386/compile/TIIKELI
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc0536000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05361f8.
link_elf: symbol bus_config_intr_desc undefined
KLD file acpi.ko - could not finalize loading
Calibrating clock(s) ... i8254 clock: 1193201 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2004558312 Hz
CPU: Intel(R) Celeron(R) CPU 2.00GHz (2004.56-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x000000000055d000 - 0x000000001f6c9fff, 521588736 bytes (127341 pages)
avail memory = 515796992 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00facf0
bios32: Entry = 0xfb170 (c00fb170)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb1a0
pnpbios: Found PnP BIOS data at 0xc00fbbe0
pnpbios: Entry = f0000:bc10  Rev = 1.0
Other BIOS signatures found:
random: <entropy source>
netsmb_dev: loaded
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=25708086)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdea0
PCI-Only Interrupts: 9 10 11 12
Location  Bus Device Pin  Link  IRQs
slot 1      2    8    A   0x68  3 4 5 7 9 10 11 12 14 15
slot 1      2    8    B   0x69  3 4 5 7 9 10 11 12 14 15
slot 1      2    8    C   0x6a  3 4 5 7 9 10 11 12 14 15
slot 1      2    8    D   0x6b  3 4 5 7 9 10 11 12 14 15
slot 2      2    4    A   0x62  3 4 5 7 9 10 11 12 14 15
slot 2      2    4    B   0x63  3 4 5 7 9 10 11 12 14 15
slot 2      2    4    C   0x68  3 4 5 7 9 10 11 12 14 15
slot 2      2    4    D   0x69  3 4 5 7 9 10 11 12 14 15
slot 3      2    5    A   0x63  3 4 5 7 9 10 11 12 14 15
slot 3      2    5    B   0x68  3 4 5 7 9 10 11 12 14 15
slot 3      2    5    C   0x69  3 4 5 7 9 10 11 12 14 15
slot 3      2    5    D   0x6a  3 4 5 7 9 10 11 12 14 15
slot 4      2    9    A   0x68  3 4 5 7 9 10 11 12 14 15
slot 4      2    9    B   0x69  3 4 5 7 9 10 11 12 14 15
slot 4      2    9    C   0x6a  3 4 5 7 9 10 11 12 14 15
slot 4      2    9    D   0x6b  3 4 5 7 9 10 11 12 14 15
slot 5      2   10    A   0x69  3 4 5 7 9 10 11 12 14 15
slot 5      2   10    B   0x6a  3 4 5 7 9 10 11 12 14 15
slot 5      2   10    C   0x6b  3 4 5 7 9 10 11 12 14 15
slot 5      2   10    D   0x60  3 4 5 7 9 10 11 12 14 15
slot 6      2   11    A   0x6a  3 4 5 7 9 10 11 12 14 15
slot 6      2   11    B   0x6b  3 4 5 7 9 10 11 12 14 15
slot 6      2   11    C   0x60  3 4 5 7 9 10 11 12 14 15
slot 6      2   11    D   0x61  3 4 5 7 9 10 11 12 14 15
slot 7      2   12    A   0x6b  3 4 5 7 9 10 11 12 14 15
slot 7      2   12    B   0x60  3 4 5 7 9 10 11 12 14 15
slot 7      2   12    C   0x61  3 4 5 7 9 10 11 12 14 15
slot 7      2   12    D   0x62  3 4 5 7 9 10 11 12 14 15
slot 8      2    7    A   0x6a  3 4 5 7 9 10 11 12 14 15
slot 8      2    7    B   0x6b  3 4 5 7 9 10 11 12 14 15
slot 8      2    7    C   0x60  3 4 5 7 9 10 11 12 14 15
slot 8      2    7    D   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0   30    A   0x60  3 4 5 7 9 10 11 12 14 15
embedded    0   30    B   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0   30    C   0x62  3 4 5 7 9 10 11 12 14 15
embedded    0   30    D   0x63  3 4 5 7 9 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 7 9 10 11 12 14 15
embedded    0   31    B   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0   31    C   0x60  3 4 5 7 9 10 11 12 14 15
embedded    0   31    D   0x63  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x62  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x63  3 4 5 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
        map[10]: type 3, range 32, base e8000000, size 27, enabled
found-> vendor=0x8086, dev=0x2570, revid=0x02
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2571, revid=0x02
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x244e, revid=0xc2
        bus=0, slot=30, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
        bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type 4, range 32, base 00000000, size  3, enabled
        map[14]: type 4, range 32, base 00000000, size  2, enabled
        map[18]: type 4, range 32, base 00000000, size  3, enabled
        map[1c]: type 4, range 32, base 00000000, size  2, enabled
        map[20]: type 4, range 32, base 0000f000, size  4, enabled
found-> vendor=0x8086, dev=0x24db, revid=0x02
        bus=0, slot=31, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        map[20]: type 4, range 32, base 00005000, size  5, enabled
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 0:31 INTB BIOS irq 10
found-> vendor=0x8086, dev=0x24d3, revid=0x02
        bus=0, slot=31, func=3
        class=0c-05-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
agp0: <Intel 82865 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 o
n pci0
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xfff00000-0xfffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xa000-0xbfff
pcib2:   memory decode     0xf0000000-0xfbffffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
        map[10]: type 4, range 32, base 0000a000, size  8, enabled
        map[14]: type 1, range 32, base f8020000, size 12, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 2:4 INTA BIOS irq 11
found-> vendor=0x9004, dev=0x8178, revid=0x00
        bus=2, slot=4, func=0
        class=01-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
        intpin=a, irq=11
        map[10]: type 4, range 32, base 0000a400, size  3, enabled
        map[14]: type 4, range 32, base 0000a800, size  2, enabled
        map[18]: type 4, range 32, base 0000ac00, size  3, enabled
        map[1c]: type 4, range 32, base 0000b000, size  2, enabled
        map[20]: type 4, range 32, base 0000b400, size  6, enabled
        map[24]: type 1, range 32, base f8000000, size 17, enabled
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 2:5 INTA BIOS irq 10
found-> vendor=0x105a, dev=0x4d30, revid=0x02
        bus=2, slot=5, func=0
        class=01-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 1  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000b800, size  6, enabled
pci_cfgintr_valid: BIOS irq 12 is valid
pci_cfgintr: 2:11 INTA BIOS irq 12
found-> vendor=0x10b7, dev=0x9050, revid=0x00
        bus=2, slot=11, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
        intpin=a, irq=12
        map[10]: type 1, range 32, base f0000000, size 25, enabled
pci_cfgintr_valid: BIOS irq 9 is valid
pci_cfgintr: 2:12 INTA BIOS irq 9
found-> vendor=0x5333, dev=0x88f0, revid=0x00
        bus=2, slot=12, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0083, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=9
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xa000-0xa0ff mem 0xf8020000-0xf802
0fff irq 11 at device 4.0 on pci2
ahc0: Defaulting to MEMIO off
pcib2: device ahc0 requested decoded I/O range 0xa000-0xa0ff
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable is present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 448 instructions downloaded
ahc0: Features 0x5, Bugs 0x25, Flags 0x20481540
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
atapci0: <Promise PDC20267 UDMA100 controller> port 0xb400-0xb43f,0xb000-0xb003,
0xac00-0xac07,0xa800-0xa803,0xa400-0xa407 mem 0xf8000000-0xf801ffff irq 10 at de
vice 5.0 on pci2
pcib2: device atapci0 requested decoded I/O range 0xb400-0xb43f
atapci0: [MPSAFE]
pcib2: device atapci0 requested decoded I/O range 0xa400-0xa407
pcib2: device atapci0 requested decoded I/O range 0xa800-0xa803
pcib2: device atapci0 requested decoded I/O range 0xa802-0xa802
ata2: reset tp1 mask=03 ostat0=50 ostat1=50
ata2-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata2-slave: stat=0x80 err=0x90 lsb=0x90 msb=0x90
ata2-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata2-slave: stat=0x90 err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER>
ata2-slave: ATA err=0x01 lsb=0xa5
ata2: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata2: at 0xa400 on atapci0
ata2: [MPSAFE]
pcib2: device atapci0 requested decoded I/O range 0xac00-0xac07
pcib2: device atapci0 requested decoded I/O range 0xb000-0xb003
pcib2: device atapci0 requested decoded I/O range 0xb002-0xb002
ata3: reset tp1 mask=03 ostat0=50 ostat1=50
ata3-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata3-slave: stat=0x80 err=0x90 lsb=0x90 msb=0x90
ata3-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata3-slave: stat=0x90 err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER>
ata3-slave: ATA err=0x01 lsb=0xa5
ata3: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata3: at 0xac00 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xb800-0xb83f irq 12 at device 11.0
on pci2
pcib2: device xl0 requested decoded I/O range 0xb800-0xb83f
xl0: using port I/O
xl0: Ethernet address: 00:60:08:0a:d4:1d
xl0: media options word: e040
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
pci2: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-
0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-slave: stat=0x80 err=0x01 lsb=0x00 msb=0x00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-slave: stat=0x80 err=0x01 lsb=0x00 msb=0x00
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 17 devices, largest 92 bytes
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
pnpbios: handle 7 device ID INT0800 (0008d425)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=0xf00000
pnpbios: handle 8 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c02: adding fixed memory32 range 0xd1000-0xd3fff, size=0x3000
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x4000-0x40bf, size=0xc0, align=0
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: adding io range 0x778-0x77b, size=0x4, align=0
pnpbios: handle 14 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0501 (0105d041)
PNPb006: adding irq mask 0x20
PNPb006: adding io range 0x330-0x331, size=0x2, align=0
pnpbios: handle 17 device ID PNPb006 (06b0d041)
PNPb02f: adding io range 0x201-0x207, size=0x7, align=0
PNPb02f: adding io range 0x200-0x200, size=0x1, align=0
pnpbios: handle 18 device ID PNPb02f (2fb0d041)
vt: vt0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcf000-0xd0fff,0xc8000-0xcefff,0xc0000-0xc7fff on
isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f
0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNPb006> failed to probe at port 0x330-0x331 irq 5 on isa0
unknown: <PNPb02f> failed to probe at port 0x200,0x201-0x207 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2004558312 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata1: spurious interrupt - status=0x50 error=0x01 reason=0x01
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA100 on Intel ICH5 chip
GEOM: create disk ad0 dp=0xc4110070
ad0: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata0-master
ad0: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 160039240704 end 160039272959
ad1: setting UDMA100 on Intel ICH5 chip
GEOM: create disk ad1 dp=0xc404bc70
ad1: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata0-slave
ad1: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
GEOM: Configure ad0s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad0s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad0s1d, start 0 length 160039240704 end 160039240703
GEOM: new disk ad1
ata1-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 160039240704 end 160039272959
ad2: setting UDMA100 on Intel ICH5 chip
GEOM: create disk ad2 dp=0xc4133e70
ad2: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata1-master
ad2: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
GEOM: Configure ad1s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad1s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad1s1d, start 0 length 160039240704 end 160039240703
GEOM: new disk ad2
ar: FreeBSD check1 failed
ad3: setting UDMA100 on Intel ICH5 chip
GEOM: create disk ad3 dp=0xc4133770
ad3: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata1-slave
ad3: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad3: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 160039240704 end 160039272959
ata2-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
GEOM: new disk ad3
ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
GEOM: Configure ad2s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad2s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad2s1d, start 0 length 160039240704 end 160039240703
ad4: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad4 dp=0xc4133470
ad4: <ST3120023A/3.31> ATA-6 disk at ata2-master
ad4: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad3s1, start 32256 length 160039240704 end 160039272959
ar: Promise check1 failed
ad5: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad5 dp=0xc4133d70
ad5: <ST3120023A/3.31> ATA-6 disk at ata2-slave
ad5: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad5: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad4
ar: Promise check1 failed
GEOM: Configure ad3s1a, start 8192 length 160039232512 end 160039240703
GEOM: Configure ad3s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure ad3s1d, start 0 length 160039240704 end 160039240703
GEOM: new disk ad5
ata3-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata3-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 120031478784 end 120031511039
ad6: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad6 dp=0xc414cb70
ad6: <ST3120023A/3.31> ATA-6 disk at ata3-master
ad6: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad5s1, start 32256 length 120031478784 end 120031511039
ar: Promise check1 failed
ad7: setting UDMA100 on Promise PDC20267 chip
GEOM: create disk ad7 dp=0xc414c070
ad7: <ST3120023A/3.31> ATA-6 disk at ata3-slave
ad7: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad7: 16 secs/int, 1 depth queue, UDMA100
GEOM: Configure ad4s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad4s1d, start 0 length 120031478784 end 120031478783
GEOM: new disk ad6
ar: Promise check1 failed
Waiting 8 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
GEOM: Configure ad5s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad5s1d, start 0 length 120031478784 end 120031478783
GEOM: new disk ad7
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad6s1, start 32256 length 120031478784 end 120031511039
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad7s1, start 32256 length 120031478784 end 120031511039
GEOM: Configure ad6s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad6s1d, start 0 length 120031478784 end 120031478783
GEOM: Configure ad7s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad7s1d, start 0 length 120031478784 end 120031478783
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period c, offset 8
(ahc0:A:0:0): Received SDTR period c, offset 8
        Filtered to period c, offset 8
ahc0: target 0 synchronous at 20.0MHz, offset = 0x8
GEOM: create disk da0 dp=0xc414e850
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device
pass0: Serial Number LA691693
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enable
d
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device
da0: Serial Number LA691693
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
GEOM: new disk da0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679
GEOM: Configure da0s1a, start 524288000 length 1073741824 end 1598029823
GEOM: Configure da0s1b, start 0 length 524288000 end 524287999
GEOM: Configure da0s1c, start 0 length 9097127424 end 9097127423
GEOM: Configure da0s1d, start 1598029824 length 7499097600 end 9097127423
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point.
ps: kvm_getprocs: Invalid argument
ps: kvm_getprocs: Invalid argument
kernel dumps on /dev/da0s1b
swapon: adding /dev/da0s1b as swap device
Starting file system checks:
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 262532 free (15348 frags, 30898 blocks, 3.0% fragmentation)
/dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1d: clean, 1765915 free (24851 frags, 217633 blocks, 0.7% fragmentation
)
Setting hostname: iki.fi.
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 193.64.243.175 netmask 0xffffffe0 broadcast 193.64.243.191
        inet6 fe80::260:8ff:fe0a:d41d%xl0 prefixlen 64 tentative scopeid 0x1
        ether 00:60:08:0a:d4:1d
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
        inet 127.0.0.1 netmask 0xff000000
add net default: gateway 193.64.243.190
Additional routing options:.
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
net.inet6.ip6.forwarding: 0 -> 0
ifconfig: prefixlen:260:8ff:fe0a:d41d: bad value
ifconfig: 64:260:8ff:fe0a:d41d: bad value
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet6 fe80::260:8ff:fe0a:d41d%xl0 prefixlen 64 tentative scopeid 0x1
        inet6 2001:670:a0:11:: prefixlen 64 tentative
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
add net fe80::: gateway ::1
add net ff02::: gateway ::1
IPv4 mapped IPv6 address support=NO
hw.bus.devctl_disable: 0 -> 1
Mounting NFS file systems:.
Starting syslogd.
Checking for core dump...
savecore: no dumps found
Starting ntpdate.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting usbd.
No USB host controllers found
Starting local daemons:.
Updating motd.
Starting ntpd.
Configuring syscons: blanktime.
Starting sshd.
Initial i386 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization: proftpd Samba (skipping setiathome.sh, not executa
ble).
Additional TCP options:.