Date: Tue, 1 Jun 2004 10:27:32 -0700 (PDT) From: Jan Jungnickel <jj@carmunity.de> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/67456: LOR on dual-xeon w/ ht Message-ID: <200406011727.i51HRWhQ022776@www.freebsd.org> Resent-Message-ID: <200406011730.i51HUQvk081256@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 67456 >Category: i386 >Synopsis: LOR on dual-xeon w/ ht >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Jun 01 10:30:26 PDT 2004 >Closed-Date: >Last-Modified: >Originator: Jan Jungnickel >Release: 5.2-CURRENT >Organization: carmunit.com GmbH >Environment: FreeBSD db0-0.carmunity.de 5.2-CURRENT FreeBSD 5.2-CURRENT #3: Fri May 28 09:55:59 CEST 2004 root@db0-0.carmunity.de:/usr/obj/usr/src/sys/DB0-0 i386 >Description: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #3: Fri May 28 09:55:59 CEST 2004 root@db0-0.carmunity.de:/usr/obj/usr/src/sys/DB0-0 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0721000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0721244. ACPI APIC Table: <INTEL S7501HG0> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.30-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2147418112 (2047 MB) avail memory = 2100674560 (2003 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ACPI-0697: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [GPEN] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [GPST] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [GP1N] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [SBID] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [SWCE] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [SMIR] had invalid type (String) for Scope operator, changed to (Scope) ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard lapic0: Forcing LINT1 to edge trigger random: <entropy source, Software, Yarrow> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <INTEL S7501HG0> on motherboard acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P5 - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib1 pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci2 pci4: <ACPI PCI bus> on pcib2 iir0: <Intel Integrated RAID Controller> mem 0xfc8f0000-0xfc8f3fff irq 52 at device 2.0 on pci4 iir0: [GIANT-LOCKED] em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x2040-0x207f mem 0xfeaa0000-0xfeabffff irq 58 at device 5.0 on pci4 em0: [GIANT-LOCKED] em0: Ethernet address: 00:07:e9:2e:25:28 em0: Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x2000-0x203f mem 0xfeac0000-0xfeadffff irq 59 at device 5.1 on pci4 em1: [GIANT-LOCKED] em1: Ethernet address: 00:07:e9:2e:25:29 em1: Speed:N/A Duplex:N/A pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pci0: <unknown> at device 3.1 (no driver attached) pci0: <serial bus, USB> at device 29.0 (no driver attached) pci0: <serial bus, USB> at device 29.1 (no driver attached) pci0: <serial bus, USB> at device 29.2 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib4 pci1: <display, VGA> at device 12.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 31.1 (no driver attached) pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 acpi_ec0: <Embedded Controller: GPE 0x8> port 0xca7,0xca6 on acpi0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A orm0: <Option ROMs> at iomem 0xcf000-0xd07ff,0xcd800-0xcefff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec Waiting 2 seconds for SCSI devices to settle ses0 at iir0 bus 0 target 6 lun 0 ses0: <ESG-SHV SCA HSBP M15 0.10> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device da0 at iir0 bus 2 target 0 lun 0 da0: <Intel Host Drive #00 > Fixed Direct Access SCSI-2 device da0: Tagged Queueing Enabled da0: 70017MB (143396190 512 byte sectors: 255H 63S/T 8926C) SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! lapic6: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! Mounting root from ufs:/dev/da0s1a em0: Link is up 100 Mbps Full Duplex em1: Link is up 1000 Mbps Full Duplex uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x3040-0x305f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x3020-0x303f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x3000-0x301f irq 18 at device 29.2 on pci0 uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x3000-0x301f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered >How-To-Repeat: After a certain amount of time has passed during normal production, the lor will occur. It seems to happen during disk access. >Fix: None at this time. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200406011727.i51HRWhQ022776>