Date: Wed, 12 Jun 2002 12:29:17 +1000 From: Michael Ross <satare@optusnet.com.au> To: santos <sansan@myrealbox.com> Cc: gnome@freebsd.org Subject: Re: Error in Gnome install Message-ID: <200206120229.g5C2TH605009@mail015.syd.optusnet.com.au>
next in thread | raw e-mail | index | archive | help
Hi,
I'll hazard a guess for you. It looks like your libxml version is
too small to allow gnome2 to compile. The version required
by the build has to be >2.4.20..
Whereas from your ls /var/db/pkg you only has 2.4.12. I had
a similar problem a few months back when I was trying to install
the ogle port.
In the end I had to download the source for the latest libxml2
and install it. After that everything went fine.
hope this helps,
Michael
> santos <sansan@myrealbox.com> wrote:
>
> Hi, i got this error when installing gnome2, i don't know what's
> wrong.
> Here are the outputs:
>
> *****************************
> make install clean
> ***********************
>
> root@upsilon /usr/ports/x11/gnome2 p0# make install clean
> ===> Installing for gnome2-2.0_1
> ===> gnome2-2.0_1 depends on executable: battstat-applet-2 - not
> found
> ===> Verifying install for battstat-applet-2 in
> /usr/ports/x11/gnomeapplets2
> ===> Extracting for gnomeapplets2-1.103.0
> >> Checksum OK for gnome2/gnome-applets-1.103.0.tar.bz2.
> ===> gnomeapplets2-1.103.0 depends on executable: gmake - found
> ===> gnomeapplets2-1.103.0 depends on executable: libtool - found
> ===> gnomeapplets2-1.103.0 depends on shared library:
> panel-applet-2.0
> - not f
> ound
> ===> Verifying install for panel-applet-2.0 in
> /usr/ports/x11/gnomepanel
> ===> Extracting for gnomepanel-1.5.22
> >> Checksum OK for gnome2/gnome-panel-1.5.22.tar.bz2.
> ===> gnomepanel-1.5.22 depends on executable: gmake - found
> ===> gnomepanel-1.5.22 depends on executable: libtool - found
> ===> gnomepanel-1.5.22 depends on shared library: wnck-1.4 - found
> ===> gnomepanel-1.5.22 depends on shared library: gnome-desktop-2.0
> -
> not foun
> d
> ===> Verifying install for gnome-desktop-2.0 in
> /usr/ports/x11/gnomedesktop
> ===> Extracting for gnomedesktop-1.5.20
> >> Checksum OK for gnome2/gnome-desktop-1.5.20.tar.bz2.
> ===> gnomedesktop-1.5.20 depends on executable: gmake - found
> ===> gnomedesktop-1.5.20 depends on executable: libtool - found
> ===> gnomedesktop-1.5.20 depends on executable: bison - found
> ===> gnomedesktop-1.5.20 depends on shared library: gnomeui-2.0 -
> not
> found
> ===> Verifying install for gnomeui-2.0 in
> /usr/ports/x11-toolkits/libgnomeui
> ===> Extracting for libgnomeui-1.117.1
> >> Checksum OK for gnome2/libgnomeui-1.117.1.tar.bz2.
> ===> libgnomeui-1.117.1 depends on executable: gmake - found
> ===> libgnomeui-1.117.1 depends on executable: libtool - found
> ===> libgnomeui-1.117.1 depends on executable: bison - found
> ===> libgnomeui-1.117.1 depends on shared library: bonoboui-2.0 -
> not
> found
> ===> Verifying install for bonoboui-2.0 in
> /usr/ports/x11-toolkits/libbonobou
> i
> ===> Extracting for libbonoboui-1.117.0
> >> Checksum OK for gnome2/libbonoboui-1.117.0.tar.bz2.
> ===> libbonoboui-1.117.0 depends on executable: gmake - found
> ===> libbonoboui-1.117.0 depends on executable: libtool - found
> ===> libbonoboui-1.117.0 depends on shared library: gnomecanvas-2.0
> -
> found
> ===> libbonoboui-1.117.0 depends on shared library: gnome-2.0 - not
> found
> ===> Verifying install for gnome-2.0 in /usr/ports/x11/libgnome
> ===> Extracting for libgnome-1.117.1
> >> Checksum OK for gnome2/libgnome-1.117.1.tar.bz2.
> ===> libgnome-1.117.1 depends on executable: gmake - found
> ===> libgnome-1.117.1 depends on executable: libtool - found
> ===> libgnome-1.117.1 depends on executable: bison - found
> ===> libgnome-1.117.1 depends on shared library: xslt.1 - found
> ===> libgnome-1.117.1 depends on shared library: gnomevfs-2.0 - not
> found
> ===> Verifying install for gnomevfs-2.0 in
> /usr/ports/devel/gnomevfs2
> ===> Extracting for gnomevfs2-1.9.16
> >> Checksum OK for gnome2/gnome-vfs-1.9.16.tar.bz2.
> ===> gnomevfs2-1.9.16 depends on file:
> /usr/X11R6/libdata/pkgconfig/gnome-mime
>
> -data-2.0.pc - found
> ===> gnomevfs2-1.9.16 depends on executable: gmake - found
> ===> gnomevfs2-1.9.16 depends on executable: libtool - found
> ===> gnomevfs2-1.9.16 depends on shared library: gconf-2.5 - found
> ===> gnomevfs2-1.9.16 depends on shared library: bonobo-2.0 - not
> found
> ===> Verifying install for bonobo-2.0 in
> /usr/ports/devel/libbonobo
> ===> Extracting for libbonobo-1.117.0_1
> >> Checksum OK for gnome2/libbonobo-1.117.0.tar.bz2.
> ===> libbonobo-1.117.0_1 depends on executable: gmake - found
> ===> libbonobo-1.117.0_1 depends on executable: libtool - found
> ===> libbonobo-1.117.0_1 depends on executable: bison - found
> ===> libbonobo-1.117.0_1 depends on shared library:
> bonobo-activation.4 - not found
> ===> Verifying install for bonobo-activation.4 in
> /usr/ports/devel/bonobo-act ivation
> ===> Configuring for bonobo-activation-0.9.9
> checking for a BSD compatible install... /usr/bin/install -c -o root
> -g
> wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... found
> checking for working autoconf... found
> checking for working automake... found
> checking for working autoheader... found
> checking for working makeinfo... found
> checking for perl... /usr/bin/perl
> checking whether to enable maintainer-specific portions of
> Makefiles... no
> checking build system type... i386-unknown-freebsd4.6
> checking host system type... i386-unknown-freebsd4.6
> checking for gcc... cc
> checking for C compiler default output... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for executable suffix...
> checking for object suffix... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking command to parse /usr/bin/nm -B output... ok
> checking how to run the C preprocessor... cc -E
> checking for dlfcn.h... yes
> checking for ranlib... ranlib
> checking for strip... strip
> checking for objdir... .libs
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared
> libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... freebsd4.6 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking whether -lc should be explicitly linked in... yes
> creating libtool
> checking host system type... i386-unknown-freebsdelf4.6
> checking for ranlib... ranlib
> checking whether we are using GNU C... yes
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking whether ln -s works... yes
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared
> libraries... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsdelf4.6 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> checking whether build environment is sane... yes
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for flex... flex
> checking for flex... (cached) flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking for bison... bison -y
> checking for a BSD compatible install... /usr/bin/install -c -o root
> -g
> wheel
> checking whether ln -s works... yes
> checking whether gmake sets ${MAKE}... (cached) yes
> checking for strerror in -lcposix... no
> checking for ranlib... (cached) ranlib
> checking for ANSI C header files... yes
> checking for cc option to accept ANSI C... none needed
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... no
> checking for unistd.h... yes
> checking for off_t... yes
> checking for size_t... yes
> checking for working alloca.h... no
> checking for alloca... yes
> checking for stdlib.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... yes
> checking for working mmap... yes
> checking for argz.h... no
> checking for limits.h... yes
> checking for locale.h... yes
> checking for nl_types.h... yes
> checking for malloc.h... yes
> checking for string.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for sys/param.h... yes
> checking for getcwd... yes
> checking for munmap... yes
> checking for putenv... yes
> checking for setenv... yes
> checking for setlocale... yes
> checking for strchr... yes
> checking for strcasecmp... yes
> checking for strdup... yes
> checking for __argz_count... no
> checking for __argz_stringify... no
> checking for __argz_next... no
> checking for LC_MESSAGES... yes
> checking for libintl.h... yes
> checking for dgettext in libc... no
> checking for bindtextdomain in -lintl... yes
> checking for dgettext in libintl... checking for dgettext in
> -lintl... yes
> yes
> checking for msgfmt... /usr/local/bin/msgfmt
> checking for dcgettext... yes
> checking for gmsgfmt... /usr/local/bin/msgfmt
> checking for xgettext... /usr/local/bin/xgettext
> checking for catalogs to be installed... az bg da de el es fi fr ga
> gl
> hu it ja ko lv ms nl nn no pl pt pt_BR ro ru sk sl sv ta tr uk vi
> zh_CN
> zh_TW
> checking for pkg-config... /usr/local/bin/pkg-config
> checking for gmodule-2.0 >= 2.0.1 ORBit-2.0 >= 2.3.108... yes
> checking BONOBO_ACTIVATION_CFLAGS... -D_REENTRANT
> -D_THREAD_SAFE -DORBIT2=1 -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/orbit-2.0
> -I/usr/local/include/linc-1.0
> checking BONOBO_ACTIVATION_LIBS... -Wl,--export-dynamic
> -pthread -Wl,--export-dynamic -pthread
> -Wl,--export-dynamic
> -L/usr/local/lib -lORBit-2 -lgthread-2.0 -lgobject-2.0 -lgmodule-2.0
> -lglib-2.0 -lintl -liconv -lm -llinc
> checking for gmodule-2.0 >= 2.0.1 ORBit-2.0 >= 2.3.108
> ORBit-CosNaming-2.0 >= 2.3.108 libxml-2.0 >= 2.4.20... Requested
> 'libxml-2.0 >= 2.4.20' but version of libXML is 2.4.12
>
> configure: error: Library requirements ( gmodule-2.0 >= 2.0.1
>
> ORBit-2.0 >= 2.3.108 ORBit-CosNaming-2.0 >= 2.3.108
> libxml-2.0 >= 2.4.20) not met; consider adjusting the PKG_CONFIG_PATH
>
> environment variable if your libraries are in a nonstandard prefix so
>
> pkg-config can find them.
> ===> Script "configure" failed unexpectedly.
> Please report the problem to gnome@FreeBSD.org [maintainer] and
> attach
> the
>
> including the output of the failure of your make command. Also,
> it
> might
> be a good idea to provide an overview of all packages installed
> on
> your
> system (e.g. an `ls /var/db/pkg`).
> *** Error code 1
>
> Stop in /usr/ports/devel/bonobo-activation.
> *** Error code 1
>
> Stop in /usr/ports/devel/libbonobo.
> *** Error code 1
>
> Stop in /usr/ports/devel/gnomevfs2.
> *** Error code 1
>
> Stop in /usr/ports/x11/libgnome.
> *** Error code 1
>
> Stop in /usr/ports/x11-toolkits/libbonoboui.
> *** Error code 1
>
> Stop in /usr/ports/x11-toolkits/libgnomeui.
> *** Error code 1
>
> Stop in /usr/ports/x11/gnomedesktop.
> *** Error code 1
>
> Stop in /usr/ports/x11/gnomepanel.
> *** Error code 1
>
> Stop in /usr/ports/x11/gnomeapplets2.
> *** Error code 1
>
> Stop in /usr/ports/x11/gnome2.
> root@upsilon /usr/ports/x11/gnome2 p0#
>
> **********************************************
> ls /var/db/pkg
> ***************************************
> root@upsilon /usr/ports/x11/gnome2 p0# ls /var/db/pkg
> Mesa-3.4.2_2 libXgFonts-1.0
> ORBit-0.5.13_1 liba52-0.7.3_2
> ORBit-0.5.15 libart_lgpl2-2.3.8
> ORBit2-2.3.110 libast-0.4
> XFree86-4.2.0_1,1 libaudiofile-0.2.2
> XFree86-FontServer-4.2.0 libaudiofile-0.2.3
> XFree86-Server-4.2.0_2 libflash-0.4.10
> XFree86-clients-4.2.0_2 libghttp-1.0.9
> XFree86-documents-4.2.0 libglade2-1.99.12
> XFree86-font100dpi-4.2.0 libgnomecanvas-1.117.0
> XFree86-font75dpi-4.2.0 libgnugetopt-1.1
> XFree86-fontCyrillic-4.2.0 libiconv-1.7_1
> XFree86-fontDefaultBitmaps-4.2.0 libiconv-1.7_4
> XFree86-fontEncodings-4.2.0 libmikmod-3.1.10
> XFree86-fontScalable-4.2.0 libmng-1.0.3
> XFree86-libraries-4.2.0_1 libogg-1.0.r3_1,2
> aalib-1.4.r5_1 librep-0.15.2
> agsatellite-0.520_2 libsigc++-1.0.3
> arts-1.0.0_1 libtool-1.3.4_2
> atk-1.0.2 libungif-4.1.0b1
> autoconf-2.53 libunicode-0.4_2
> autoconf213-2.13.000227_1 libvorbis-1.0.r3_1,2
> automake-1.5,1 libwnck-0.12
> automake14-1.4.5 libwww-5.3.2
> bash-2.05a libxine-0.9.8_3
> bbconf-1.4 libxml-1.8.16
> bbrun-1.2 libxml-1.8.17
> bison-1.35_1 libxml2-2.4.12
> bitmap-fonts-1.0 libxslt-1.0.9
> blackbox-0.62.1 linc-0.1.22
> cftp-0.11.2 linux-jdk-1.3.1.03
> colorize-0.3.0 linux_base-6.1
> cups-base-1.1.12_2 lynx-2.8.4.1b
> cvsup-16.1f m4-1.4_1
> cvsupit-3.0 man2html-3.0.1
> cvsweb-2.0.0 mozilla-1.0.rc2_1,1
> db3-3.2.9_3,1 mozilla-headers-1.0.rc2_1,1
> djbfft-0.76 mplayer-0.60.1_2
> emacs-20.7_1 mplayer-fonts-0.50
> enlightenment-0.16.5_6 nasm-0.98,1
> esound-0.2.23 ncftp-3.0.4
> esound-0.2.24 nspr-4.1.2
> eterm-0.9.1_1 open-motif-devel-2.1.30
> expat-1.95.2 p5-Term-ANSIColor-1.03
> fam-2.6.4 p5-Term-Screen-1.00
> ffmpeg-0.4.5_1 p5-type1inst-0.6.1
> flashplugin-mozilla-0.4.10_1 pango-1.0.2
> fluxbox-0.1.7_1 pcre-3.7
> fluxconf-0.6 personality-1.0
> fnlib-0.5 pilot-link-0.9.5_3
> freefonts-0.10_1 pkg_remove-1.1
> freetype-1.3.1_2 pkg_tarup-1.2_3
> freetype2-2.0.6 pkg_tree-1.1
> freetype2-2.0.9 pkgconfig-0.11.0_1
> gconf2-1.1.10 pkgconfig-0.8.0
> gdbm-1.8.0 pkgdb.db
> gdk-pixbuf-0.17.0 png-1.2.1
> gettext-0.10.35_1 png-1.2.2_4
> gettext-0.10.35_2 popt-1.5.1
> gettext-0.11.1_2 portupgrade-20020122
> ghostscript-gnu-6.52_4 pspell-0.12.2_1
> gle-3.0.3 py22-expat-2.2
> glib-1.2.10_5 py22-numeric-20.3
> glib-2.0.3 python-2.2_1
> gmake-3.79.1 qt-2.3.1_1
> gnomelibs-1.4.1.7 qt-3.0.3_4
> gnomemimedata-1.0.8 ripetools-2.4
> gob-1.0.12 rshell-1.0
> greed-0.81p ruby-1.6.6
> gtar-1.13.25_1 ruby-fnmatch-1.1b_1
> gtk-1.2.10_3 ruby-optparse-0.8.6
> gtk-2.0.3 ruby-uri-0.9,1
> gtk-engines-0.12_2 ruby-usersguide-20010216
> gtkglarea-1.2.2 scrollkeeper-0.2,1
> gtkmm-1.2.8 sdl-1.2.4_1
> guile-1.4 sox-12.17.3
> guile-gtk-0.20_1 svgalib-1.4.2_1
> icepref-1.1 tcl-8.3.4_3
> imake-4.2.0 tcsh-6.11.00
> imake-4.2.0_1 tiff-3.5.7
> imlib-1.9.11 tk-8.3.4_1
> imlib-1.9.13 toolbox-0.4.6
> imlib2-1.0.5 ttmkfdir-0.0
> imwheel-0.9.9 unrar-2.50
> intlfonts-1.2 unzip-5.50
> irssi-0.7.98.4 urwfonts-1.0
> javavmwrapper-1.4 uulib-0.5.13
> jpeg-6b_1 vilearn-1.0
> jwhois-3.0.1 vim-6.1.48
> kdeartwork-3.0 waimea-0.3.2
> kdebase-3.0_1 win32-codecs-011002.0.0.60
> kdelibs-3.0_1 wrapper-1.0_2
> lcms-1.08 xine-0.9.8_2
> lfpfonts-fix-0.82 xpm-3.4k
> lfpfonts-var-0.83 zip-2.3
> libIDL-0.7.4 zsh-4.0.4
>
>
> ****************************************************************
>
> *********************************************************
>
>
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
>
> It was created by configure, which was
> generated by GNU Autoconf 2.52. Invocation command line was
>
> $ ./configure --with-html-dir=/usr/local/share/doc
> --disable-gtk-doc
> --prefix=/usr/local --target=i386-unknown-freebsd4.6
>
> ## ---------- ##
> ## Platform. ##
> ## ---------- ##
>
> hostname = upsilon
> uname -m = i386
> uname -r = 4.6-RC
> uname -s = FreeBSD
> uname -v = FreeBSD 4.6-RC #1: Sun Jun 9 03:50:53 WEST 2002
> root@:/usr/obj/usr/src/sys/UPSILON
>
> /usr/bin/uname -p = i386
> /bin/uname -X = unknown
>
> /bin/arch = unknown
> /usr/bin/arch -k = unknown
> /usr/convex/getsysinfo = unknown
> hostinfo = unknown
> /bin/machine = unknown
> /usr/bin/oslevel = unknown
> /bin/universe = unknown
>
> PATH =
>
> ## ------------ ##
> ## Core tests. ##
> ## ------------ ##
>
> configure:1132: PATH=".;."; conftest.sh
> conftest.sh: not found
> configure:1135: $? = 127
> configure:1187: checking for a BSD compatible install
> configure:1236: result: /usr/bin/install -c -o root -g wheel
> configure:1247: checking whether build environment is sane
> configure:1290: result: yes
> configure:1305: checking whether gmake sets ${MAKE}
> configure:1325: result: yes
> configure:1353: checking for working aclocal
> configure:1360: result: found
> configure:1368: checking for working autoconf
> configure:1375: result: found
> configure:1383: checking for working automake
> configure:1390: result: found
> configure:1398: checking for working autoheader
> configure:1405: result: found
> configure:1413: checking for working makeinfo
> configure:1420: result: found
> configure:1467: checking for perl
> configure:1484: found /usr/bin/perl
> configure:1495: result: /usr/bin/perl
> configure:1529: checking whether to enable maintainer-specific
> portions
> of Makefiles
> configure:1538: result: no
> configure:1622: checking build system type
> configure:1640: result: i386-unknown-freebsd4.6
> configure:1647: checking host system type
> configure:1661: result: i386-unknown-freebsd4.6
> configure:1711: checking for gcc
> configure:1734: result: cc
> configure:1962: checking for C compiler version
> configure:1965: cc --version </dev/null >&5
> 2.95.3
> configure:1968: $? = 0
> configure:1970: cc -v </dev/null >&5
> Using builtin specs.
> gcc version 2.95.3 20010315 (release) [FreeBSD]
> configure:1973: $? = 0
> configure:1975: cc -V </dev/null >&5
> cc: argument to `-V' is missing
> configure:1978: $? = 1
> configure:1998: checking for C compiler default output
> configure:2001: cc -O -pipe -I/usr/local/include -L/usr/local/lib
> -pthread conftest.c >&5
> configure:2004: $? = 0
> configure:2033: result: a.out
> configure:2038: checking whether the C compiler works
> configure:2044: ./a.out
> configure:2047: $? = 0
> configure:2062: result: yes
> configure:2069: checking whether we are cross compiling
> configure:2071: result: no
> configure:2074: checking for executable suffix
> configure:2076: cc -o conftest -O -pipe -I/usr/local/include
> -L/usr/local/lib -pthread conftest.c >&5
> configure:2079: $? = 0
> configure:2101: result:
> configure:2107: checking for object suffix
> configure:2125: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:2128: $? = 0
> configure:2147: result: o
> configure:2151: checking whether we are using the GNU C compiler
> configure:2172: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> configure:2175: $? = 0
> configure:2178: test -s conftest.o
> configure:2181: $? = 0
> configure:2193: result: yes
> configure:2199: checking whether cc accepts -g
> configure:2217: cc -c -g -I/usr/local/include conftest.c >&5
> configure:2220: $? = 0
> configure:2223: test -s conftest.o
> configure:2226: $? = 0
> configure:2236: result: yes
> configure:2263: cc -c -O -pipe -I/usr/local/include conftest.c >&5
> conftest.c:2: syntax error before `me'
> configure:2266: $? = 1
> configure: failed program was:
> #ifndef __cplusplus
> choke me
> #endif
> configure:2385: checking for ld used by GCC
> configure:2448: result: /usr/libexec/elf/ld
> configure:2457: checking if the linker (/usr/libexec/elf/ld) is GNU
> ld
> GNU ld version 2.11.2 20010719 [FreeBSD] (with BFD 2.11.2 20010719
> [FreeBSD])
> configure:2469: result: yes
> configure:2473: checking for /usr/libexec/elf/ld option to reload
> object
> files
> configure:2480: result: -r
>
> Sorry for the BIG file. BTW i did a "# pkg_delete -r
> scrollkeeper-\*"
> before trying to install gnome2. Did i screw up?
> The error recomend to send all this outputs. I think my database is
> damaged. I did a pkgdb -F and the output was:
>
> root@upsilon /usr/ports/x11/gnome2 p0# pkgdb -F
> [Updating the pkgdb in /var/db/pkg ... Inappropriate file type or
> format
> - "/var/db/pkg/pkgdb": Cannot update the pkgdb!]
>
> If you have any idea about this error, please tell me, thanks on
> advance.
>
> Santos
>
> Santos
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-gnome" in the body of the message
> "/usr/ports/devel/bonobo-activation/work/bonobo-activation-0.9.9/conf
> ig.log"
> /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/b
> in:/usr/X11R6/bin:/root/bin
>
______________________________________________________________
_______
> _____________________________________
Michael Ross
satare@optusnet.com.au
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-gnome" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200206120229.g5C2TH605009>