Date: Wed, 07 Mar 2012 15:14:21 +0100 From: "Davide D'Amico" <davide.damico@contactlab.com> To: freebsd-fs@freebsd.org Subject: FreeBSD 9 and gmirror /geom raid Message-ID: <op.was0h7dqdwq0iw@davepro.local>
next in thread | raw e-mail | index | archive | help
Hi, I have a server DELL R210 with two sata drives: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SAMSUNG HE253GJ 1AJ30001> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <SAMSUNG HE253GJ 1AJ30001> ATA-8 SATA 2.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 Previously (8.x) - when I didn't use a hw raid - I used to install freebsd in a drive (i.e. ad4), boot from it and then: # sysctl kern.geom.debugflags=16 # gmirror label -v -b round-robin data ad4 # gmirror insert data ad6 // Modification to /etc/fstab // reboot How could accomplish to the same task with 9.0-RELEASE? Thanks, -- d.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.was0h7dqdwq0iw>