Date: Sat, 13 Jun 2009 15:13:18 +0100 From: Peter Harrison <peter.piggybox@virgin.net> To: Nikolay Tychina <niktychina@gmail.com> Cc: , acpi@freebsd.org, Peter Harrison <peter.piggybox@virgin.net> Subject: Re: ACPI problems with lenovo s10e Message-ID: <20090613141318.GA1090@ideapad.piggybox> In-Reply-To: <fe3551530906130638r720e8642wd167a883d0bca813@mail.gmail.com> References: <20090613080039.GA1934@ideapad.piggybox> <fe3551530906130638r720e8642wd167a883d0bca813@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Saturday, 13 June 2009 at 17:38:16 +0400, Nikolay Tychina said: > try to disable "ec" Do I do that with debug.acpi.disable=ec in loader.conf? What functionality will I lose by setting that? Thanks for your help. Peter Harrison. > > > 2009/6/13 Peter Harrison <peter.piggybox@virgin.net> > > > I'm having some acpi problems with a lenovo s10e netbook. > > > > The machine boots and runs basically OK, but it doesn't poweroff on > > shutdown -p and it seems to have a problem querying the battery's status. It > > will sometimes continually spam this to /var/log/messages: > > > > 175a176,212 > > > acpi_ec0: wait timed out (no response), forcing polled mode > > > acpi_ec0: EcRead: failed waiting to get data > > > ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by > > Handler for [EmbeddedControl] [20070320] > > > ACPI Error (psparse-0626): Method parse/execution failed > > [\\_SB_.BAT0.UPBS] (Node 0xc45bfac0), AE_NO_HARDWARE_RESPONSE > > > > over and over again. > > > > It doesn't happen on every boot, but on some it's so bad that the system > > will become sporadically unresponsive for a second or two at a time > > throughout use. > > > > I've been scanning through the acpi man page and wondered whether turning > > off part of the acpi system would help - if so which bit? Would upgrading to > > CURRENT help? Any thoughts or help really appreciated. > > > > Please cc me as I'm not subscribed. Thanks, > > > > > > Peter Harrison. > > > > > > > > This is on: > > > > FreeBSD ideapad.piggybox 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 > > 08:49:13 UTC 2009 root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > > i386 > > > > and here's a dmesg from a 'good' boot: > > > > Copyright (c) 1992-2009 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD is a registered trademark of The FreeBSD Foundation. > > FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 > > root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.01-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2 > > > > Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,<b22>> > > AMD Features=0x100000<NX> > > AMD Features2=0x1<LAHF> > > Logical CPUs per core: 2 > > real memory = 1064108032 (1014 MB) > > avail memory = 1023393792 (975 MB) > > ACPI APIC Table: <INTEL CALISTGA> > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > > cpu0 (BSP): APIC ID: 0 > > cpu1 (AP/HT): APIC ID: 1 > > ioapic0: Changing APIC ID to 1 > > ioapic0 <Version 2.0> irqs 0-23 on motherboard > > kbd1 at kbdmux0 > > acpi0: <PTLTD XSDT> on motherboard > > acpi0: [ITHREAD] > > acpi0: Power Button (fixed) > > Timecounter "HPET" frequency 14318180 Hz quality 900 > > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > > acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 > > acpi_button0: <Power Button> on acpi0 > > acpi_button1: <Sleep Button> on acpi0 > > acpi_acad0: <AC Adapter> on acpi0 > > battery0: <ACPI Control Method Battery> on acpi0 > > acpi_lid0: <Control Method Lid Switch> on acpi0 > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > pci0: <ACPI PCI bus> on pcib0 > > vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem > > 0xf0500000-0xf057ffff,0xd0000000-0xdfffffff,0xf0600000-0xf063ffff irq 16 at > > device 2.0 on pci0 > > agp0: <Intel 945GME SVGA controller> on vgapci0 > > agp0: detected 7932k stolen memory > > agp0: aperture size is 256M > > vgapci1: <VGA-compatible display> mem 0xf0580000-0xf05fffff at device 2.1 > > on pci0 > > hdac0: <Intel 82801G High Definition Audio Controller> mem > > 0xf0640000-0xf0643fff irq 22 at device 27.0 on pci0 > > hdac0: HDA Driver Revision: 20090329_0131 > > hdac0: [ITHREAD] > > pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > > pci2: <ACPI PCI bus> on pcib1 > > bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xf0200000-0xf020ffff irq > > 16 at device 0.0 on pci2 > > miibus0: <MII bus> on bge0 > > brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0 > > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > bge0: Ethernet address: 00:23:8b:34:79:8a > > bge0: [ITHREAD] > > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 > > pci3: <ACPI PCI bus> on pcib2 > > pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > > pci5: <ACPI PCI bus> on pcib3 > > ndis0: <Broadcom 802.11g Network Adapter> mem 0xf0400000-0xf0403fff irq 18 > > at device 0.0 on pci5 > > ndis0: [ITHREAD] > > ndis0: NDIS API version: 5.1 > > ndis0: WARNING: using obsoleted if_watchdog interface > > ndis0: Ethernet address: 00:23:4e:93:a4:de > > uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device > > 29.0 on pci0 > > uhci0: [GIANT-LOCKED] > > uhci0: [ITHREAD] > > usb0: <UHCI (generic) USB controller> on uhci0 > > usb0: USB revision 1.0 > > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > > uhub0: 2 ports with 2 removable, self powered > > uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device > > 29.1 on pci0 > > uhci1: [GIANT-LOCKED] > > uhci1: [ITHREAD] > > usb1: <UHCI (generic) USB controller> on uhci1 > > usb1: USB revision 1.0 > > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > > uhub1: 2 ports with 2 removable, self powered > > uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device > > 29.2 on pci0 > > uhci2: [GIANT-LOCKED] > > uhci2: [ITHREAD] > > usb2: <UHCI (generic) USB controller> on uhci2 > > usb2: USB revision 1.0 > > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > > uhub2: 2 ports with 2 removable, self powered > > uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device > > 29.3 on pci0 > > uhci3: [GIANT-LOCKED] > > uhci3: [ITHREAD] > > usb3: <UHCI (generic) USB controller> on uhci3 > > usb3: USB revision 1.0 > > uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > > uhub3: 2 ports with 2 removable, self powered > > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem > > 0xf0844000-0xf08443ff irq 23 at device 29.7 on pci0 > > ehci0: [GIANT-LOCKED] > > ehci0: [ITHREAD] > > usb4: EHCI version 1.0 > > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > > usb4: USB revision 2.0 > > uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 > > uhub4: 8 ports with 8 removable, self powered > > ugen0: <BISON Corporation Lenovo EasyCamera, class 239/2, rev 2.00/14.04, > > addr 2> on uhub4 > > umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/58.87, addr 3> on uhub4 > > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > > pci6: <ACPI PCI bus> on pcib4 > > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel ICH7 UDMA100 controller> port > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 > > ata0: <ATA channel 0> on atapci0 > > ata0: [ITHREAD] > > atapci1: <Intel ICH7M SATA300 controller> port > > 0x18c8-0x18cf,0x18c0-0x18c3,0x18a8-0x18af,0x180c-0x180f,0x18b0-0x18bf mem > > 0xf0844400-0xf08447ff irq 19 at device 31.2 on pci0 > > atapci1: [ITHREAD] > > atapci1: AHCI called from vendor specific driver > > atapci1: AHCI Version 01.10 controller with 4 ports detected > > ata2: <ATA channel 0> on atapci1 > > ata2: [ITHREAD] > > ata3: <ATA channel 1> on atapci1 > > ata3: port not implemented > > ata3: [ITHREAD] > > ata4: <ATA channel 2> on atapci1 > > ata4: [ITHREAD] > > ata5: <ATA channel 3> on atapci1 > > ata5: port not implemented > > ata5: [ITHREAD] > > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > > acpi_tz0: <Thermal Zone> on acpi0 > > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > kbd0 at atkbd0 > > atkbd0: [GIANT-LOCKED] > > atkbd0: [ITHREAD] > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: [GIANT-LOCKED] > > psm0: [ITHREAD] > > psm0: model Generic PS/2 mouse, device ID 0 > > cpu0: <ACPI CPU> on acpi0 > > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > > cpu1: <ACPI CPU> on acpi0 > > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > > pmtimer0 on isa0 > > orm0: <ISA Option ROMs> at iomem 0xdf000-0xdf7ff,0xe0000-0xe17ff pnpid > > ORM0000 on isa0 > > ppc0: parallel port not found. > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > sio0: port may not be enabled > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > sio0: port may not be enabled > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 8250 or not responding > > sio0: [FILTER] > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > sio1: port may not be enabled > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > ugen1: <Broadcom Corp BCM2046 Bluetooth Device, class 224/1, rev 2.00/6.01, > > addr 2> on uhub1 > > Timecounters tick every 1.000 msec > > ad4: 76319MB <HITACHI HTS543280L9SA00 FB1ZC43C> at ata2-master SATA150 > > hdac0: HDA Codec #0: Realtek ALC269 > > pcm0: <HDA Realtek ALC269 PCM #0 Analog> at cad 0 nid 1 on hdac0 > > GEOM_LABEL: Label for provider ad4s1a is ufsid/4a20f9c76d1ce80d. > > GEOM_LABEL: Label for provider ad4s1d is ufsid/4a20f9cb4eb76445. > > GEOM_LABEL: Label for provider ad4s1e is ufsid/4a20f9c7c991bdb8. > > GEOM_LABEL: Label for provider ad4s1f is ufsid/4a20f9c769a0ccbb. > > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 > > (probe0:umass-sim0:0:0:0): Medium not present > > (probe0:umass-sim0:0:0:0): Unretryable error > > SMP: AP CPU #1 Launched! > > da0 at umass-sim0 bus 0 target 0 lun 0 > > da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device > > da0: 40.000MB/s transfers > > da0: Attempt to query device size failed: NOT READY, Medium not present > > Trying to mount root from ufs:/dev/ad4s1a > > GEOM_LABEL: Label ufsid/4a20f9c76d1ce80d removed. > > GEOM_LABEL: Label for provider ad4s1a is ufsid/4a20f9c76d1ce80d. > > GEOM_LABEL: Label ufsid/4a20f9c7c991bdb8 removed. > > GEOM_LABEL: Label for provider ad4s1e is ufsid/4a20f9c7c991bdb8. > > GEOM_LABEL: Label ufsid/4a20f9c769a0ccbb removed. > > GEOM_LABEL: Label for provider ad4s1f is ufsid/4a20f9c769a0ccbb. > > GEOM_LABEL: Label ufsid/4a20f9cb4eb76445 removed. > > GEOM_LABEL: Label for provider ad4s1d is ufsid/4a20f9cb4eb76445. > > GEOM_LABEL: Label ufsid/4a20f9c76d1ce80d removed. > > GEOM_LABEL: Label ufsid/4a20f9c7c991bdb8 removed. > > GEOM_LABEL: Label ufsid/4a20f9c769a0ccbb removed. > > GEOM_LABEL: Label ufsid/4a20f9cb4eb76445 removed. > > drm0: <Intel i945GME> on vgapci0 > > vgapci0: child drm0 requested pci_enable_busmaster > > info: [drm] AGP at 0xd0000000 256MB > > info: [drm] Initialized i915 1.6.0 20080730 > > drm0: [ITHREAD] > > _______________________________________________ > > freebsd-acpi@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090613141318.GA1090>