Date: Sun, 02 May 1999 08:45:56 -0400 From: Chuck Pearce <0211g105@se.mediaone.net> To: freebsd-questions@FreeBSD.ORG Subject: PnP Devices Message-ID: <372C4904.BD9E3415@se.mediaone.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------F8D110BECB06A052F5045799
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Whenever I boot up, and try to use my modem it does not work, I have
been told this is because it is a PnP modem, I also have the same
problem with my network card. My modem is on COM 2 in windows, IRQ: 03,
I/O 02F8h-02FFh. I have been able to boot up my box with the boot -c
option and type this at the prompt:
pnp 2 0 enable os irq0 3 port0 0x3f8. I gave my boot record to someone
and they told me it looked like the modem was working, I still havent
been able to send it commands when I go to it with term, and when I use
KPPP it just locks up KPPP and also locks the modem from further use.
My modem is a U.S. Robotics 33.6 FAX INT PnP, and my Network card is an
Intel EtherExpress PRO/10+ PnP. IRQ: 05, I/O: 0230h-023Fh. I have
included in this file a copy of my kernel, and two boot records. The
dmesg.with is the record from when I booted using the -c command. The
boot record from dmesg.without is when I just let it boot up naturally.
Please let me know how to fix this.
Thank You
Chuck Pearce
--------------F8D110BECB06A052F5045799
Content-Type: text/plain; charset=us-ascii;
name="dmesg.with"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.with"
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #8: Sat May 1 14:38:16 EST 1999
root@Vulture:/usr/src/sys/compile/VULTURE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 400911061 Hz
CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping=1
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 67108864 (65536K bytes)
FreeBSD Kernel Configuration Utility - Version 1.2
Type "help" for help or "visual" to go to the visual
configuration interface (requires MGA/VGA display or
serial terminal capable of displaying ANSI graphics).
config> pnp 1 \^H \^H\^H \^H2 0 enable os irq0 3 port0 0x3f8
config> s\^H \^Hexit
avail memory = 62230528 (60772K bytes)
Preloaded elf kernel "kernel" at 0xf02e8000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
ahc0: <Adaptec aic7895 Ultra SCSI adapter> rev 0x04 int a irq 10 on pci0.14.0
ahc0: Illegal cable configuration!!. Only two connectors on the adapter may be used at a time!
ahc0: aic7895 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> rev 0x04 int b irq 10 on pci0.14.1
ahc1: Illegal cable configuration!!. Only two connectors on the adapter may be used at a time!
ahc1: aic7895 Wide Channel B, SCSI Id=7, 16/255 SCBs
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x03 int a irq 11 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: INT1030 [0x3010d425] Serial 0x00c28b69 Comp ID: @@@0000 [0x00000000]
CSN 2 Vendor ID: USR0002 [0x02007256] Serial 0xade1a29d Comp ID: @@@0000 [0x00000000]
sio2: type 16550A
sio2 (siopnp <USR0011> sn 0xade1a29d) at 0x3f8-0x3ff irq 3 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1 at 0x2f8-0x2ff irq 4 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
sb_reset_dsp failed
sb0 not found at 0x220
Waiting 15 seconds for SCSI devices to settle
changing root device to da0s1a
da1 at ahc0 bus 0 target 6 lun 0
da1: <QUANTUM FIREBALL SE6.4S PJ0A> Fixed Direct Access SCSI-2 device
da1: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da1: 6149MB (12594960 512 byte sectors: 255H 63S/T 784C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <CONNER CFP4207S 4.28GB 5767> Fixed Direct Access SCSI-2 device
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <PIONEER CD-ROM DR-U06S 1.05> Removable CD-ROM SCSI-2 device
cd0: 19.230MB/s transfers (19.230MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 4 lun 0
cd1: <PLEXTOR CD-R PX-R412C 1.02> Removable CD-ROM SCSI-2 device
cd1: 10.0MB/s transfers (10.0MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present
(da0:ahc0:0:0:0): tagged openings now 31
--------------F8D110BECB06A052F5045799
Content-Type: text/plain; charset=us-ascii;
name="dmesg.without"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.without"
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #8: Sat May 1 14:38:16 EST 1999
root@Vulture:/usr/src/sys/compile/VULTURE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 400910509 Hz
CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping=1
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 67108864 (65536K bytes)
avail memory = 62230528 (60772K bytes)
Preloaded elf kernel "kernel" at 0xf02e8000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
ahc0: <Adaptec aic7895 Ultra SCSI adapter> rev 0x04 int a irq 10 on pci0.14.0
ahc0: Illegal cable configuration!!. Only two connectors on the adapter may be used at a time!
ahc0: aic7895 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> rev 0x04 int b irq 10 on pci0.14.1
ahc1: Illegal cable configuration!!. Only two connectors on the adapter may be used at a time!
ahc1: aic7895 Wide Channel B, SCSI Id=7, 16/255 SCBs
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x03 int a irq 11 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: INT1030 [0x3010d425] Serial 0x00c28b69 Comp ID: @@@0000 [0x00000000]
CSN 2 Vendor ID: USR0002 [0x02007256] Serial 0xade1a29d Comp ID: @@@0000 [0x00000000]
CSN 2 is disabled.
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio1: configured irq 4 not in bitmap of probed irqs 0x8
sio1 at 0x2f8-0x2ff irq 4 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
sb_reset_dsp failed
sb0 not found at 0x220
Waiting 15 seconds for SCSI devices to settle
changing root device to da0s1a
da1 at ahc0 bus 0 target 6 lun 0
da1: <QUANTUM FIREBALL SE6.4S PJ0A> Fixed Direct Access SCSI-2 device
da1: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da1: 6149MB (12594960 512 byte sectors: 255H 63S/T 784C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <CONNER CFP4207S 4.28GB 5767> Fixed Direct Access SCSI-2 device
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <PIONEER CD-ROM DR-U06S 1.05> Removable CD-ROM SCSI-2 device
cd0: 19.230MB/s transfers (19.230MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 4 lun 0
cd1: <PLEXTOR CD-R PX-R412C 1.02> Removable CD-ROM SCSI-2 device
cd1: 10.0MB/s transfers (10.0MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present
--------------F8D110BECB06A052F5045799
Content-Type: text/plain; charset=us-ascii;
name="vulture"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="vulture"
#
# Vulture -- Pentium II 400 with 2 CDROM Drives,1 CD-R and a SoundBlaster 64
# COM2 Support enabled for a 33600 MODEM on ISA.
machine "i386"
#cpu "I386_CPU"
#cpu "I486_CPU"
#cpu "I586_CPU"
cpu "I686_CPU"
options "NO_F00F_HACK"
ident VULTURE
maxusers 32
#options MATH_EMULATE
options INET
options FFS
options FFS_ROOT
options MFS
options MFS_ROOT
options NFS
options NFS_ROOT
options MSDOSFS
options "CD9660"
options "CD9660_ROOT"
options PROCFS
options "COMPAT_43"
options SCSI_DELAY=15000
options UCONSOLE
options FAILSAFE
options USERCONFIG
options VISUAL_USERCONFIG
config kernel root on wd0
controller isa0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
options "CMD640"
#controller wdc0 at isa? port "IO_WD1" bio irq 14
#disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#options ATAPI
#options ATAPI_STATIC
#device acd0
#device wfd0
controller ncr0
controller ahb0
controller ahc0
controller isp0
controller dpt0
controller adw0
controller scbus0
device da0
device sa0
device pass0
device cd0
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device vga0 at isa? port ? conflicts
pseudo-device splash
device sc0 at isa? tty
device npx0 at isa? port IO_NPX irq 13
device psm0 at isa? tty irq 12
controller atkbdc0 at isa? port IO_KBD tty
device ppc0 at isa? port? net irq 7
controller ppbus0
device nlpt0 at ppbus?
device plip0 at ppbus?
device ppi0 at ppbus?
controller pnp0
#device ax0
#device de0
device fxp0
#device mx0
#device pn0
#device rl0
#device tl0
#device tx0
#device vr0
#device vx0
#device wb0
#device xl0
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip
options KTRACE
options SYSVSHM
options SYSVMSG
controller usb0
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1
device sio1 at isa? port "IO_COM2" tty irq 4 vector siointr
--------------F8D110BECB06A052F5045799--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?372C4904.BD9E3415>