Date: Wed, 20 Feb 2008 16:39:22 +0000 From: "Kemian Dang" <dangkm@gmail.com> To: "Kemian Dang" <dangkm@gmail.com>, freebsd-questions@freebsd.org Subject: Re: port net/acx100 for usr5410 pcmcia wireless FBSD 6.3 Message-ID: <82f916c90802200839j3580ca15i7ab59bedbd17f1d@mail.gmail.com> In-Reply-To: <20080220154901.GA1674@mech-aslap33.men.bris.ac.uk> References: <20080201111805.GA7580@mech-aslap33.men.bris.ac.uk> <20080219142254.GA77217@mech-aslap33.men.bris.ac.uk> <82f916c90802200421n2b22229alc9e40f64373c4b45@mail.gmail.com> <20080220154901.GA1674@mech-aslap33.men.bris.ac.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Try add it to the /boot/loader.conf and restart to see whether it works. My ndis0 can not get response from "ifconfig ndis0 scan", but I can give it the ssid manually and make it work. kemian On 20/02/2008, Anton Shterenlikht <mexas@bristol.ac.uk> wrote: > > On 19/02/2008, Anton Shterenlikht <mexas@bristol.ac.uk> wrote: > > > I tried to contact the port maintainer, but haven't heard anything back. > > > > > > I'd like to use US Robotics usr5410 wireless pcmcia card on my FBSD 6.3 > > > laptop. I understand this card is (was?) supported by port net/acx100. > > > However, the net/acx100/Makefile has: > > > > > > BROKEN= Does not compile on FreeBSD >= 6.x > > > > > > In addition the port maintainer's website, dev.kewl.org, states that > > > acx100 is obsolete, and was replaced by acx100+111. However, there > > > is no FBSD port for acx100+111. > > > > > > Is anybody using net/acx100? On what version of FBSD? > > > > > > Is anybody using acx100+111? What is the best way to install it? > > > > > > Is anybody using usr5410? With what driver? And what version of FBSD? > > > > > > Any other advice on getting usr5410 working on FBSD 6.3? > > > > On Wed, Feb 20, 2008 at 12:21:22PM +0000, Kemian Dang wrote: > > Try ndis, it works for my broadcom wireless adapter. > > I added ndis to the kernel and built the kernel module using > http://www.linuxant.com/usr11gv40q.zip driver. > > However, when I load the module: > > # kldstat -vn usr* > Id Refs Address Size Name > 2 1 0xc216c000 3d000 usr11g_sys.ko > Contains modules: > Id Name > 180 pci/usr11g_sys > 181 cardbus/usr11g_sys > 182 pccard/usr11g_sys > 183 uhub/usr11g_sys > # > > I get errors. From dmesg: > > cardbus1: Expecting link target, got 0xed > cardbus1: Resource not specified in CIS: id=10, size=2000 > cardbus1: Resource not specified in CIS: id=14, size=20000 > ndis0: <U.S. Robotics 802.11g Wireless Turbo Adapter> mem 0x88020000-0x88021fff,0x88000000-0x8801ffff irq 11 at device 0.0 on cardbus1 > ndis0: NDIS API version: 5.1 > ndis0: init handler failed > device_attach: ndis0 attach returned 6 > > > What am I doing wrong? > > -- > Anton Shterenlikht > Room 2.6, Queen's Building > Mech Eng Dept > Bristol University > University Walk, Bristol BS8 1TR, UK > Tel: +44 (0)117 928 8233 > Fax: +44 (0)117 929 4423 >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?82f916c90802200839j3580ca15i7ab59bedbd17f1d>