From owner-freebsd-multimedia Wed Jan 27 15:17:17 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA28342 for freebsd-multimedia-outgoing; Wed, 27 Jan 1999 15:17:17 -0800 (PST) (envelope-from owner-freebsd-multimedia@FreeBSD.ORG) Received: from arthur.caida.org (arthur.caida.org [204.212.46.6]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id PAA28329 for ; Wed, 27 Jan 1999 15:17:12 -0800 (PST) (envelope-from dwm@arthur.caida.org) Received: from arthur.caida.org (localhost.caida.org [127.0.0.1]) by arthur.caida.org (8.9.0/8.9.0.Beta5) with ESMTP id RAA00794; Wed, 27 Jan 1999 17:17:05 -0600 (CST) Message-Id: <199901272317.RAA00794@arthur.caida.org> Location: CAIDA Ann Arbor, MI To: Randy Bush cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: can't get back to luigi on 4.0-current In-reply-to: Message from of Wed Jan 27, 1999 14:49 PST Date: Wed, 27 Jan 1999 18:17:04 -0500 From: Daniel McRobb Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org The problem is probably that /dev/mixer, /dev/dsp and /dev/audio (all symlinks) are pointing to pcm0 devices. The driver entry points you want are /dev/dsp1, /dev/mixer1 and /dev/audio1. Just fix the symlinks in /dev to point at the right devices. Daniel ~~~~~~ > so i had moved my sound card (awe64) from luigi to vox to try and chase the > fxtv problem the other week, until i found that the brooktree driver does > not yet support the hauppauge tuner sound stuff. > > well, i need the mbone tools, and vat seems to want luigi. so i rehacked > the kernel (4.0-current as of 990126) to luigi, i think. kernel config sez > > device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr > > but it is not working. when i run vat or xmix, they syslog the following: > > pcm0: unit not configured, perhaps you want pcm1 ? > > and > > # xmix > Error opening mixer device /dev/mixer: Device not configured > > maybe it is that /kernel.config is not getting run in 4.0? because it has > the > USERCONFIG > pnp 1 0 enable os port0 0x220 port1 0x330 port2 0x388 irq0 5 drq0 1 drq1 5 > pnp 1 1 enable os port0 0x200 > pnp 1 2 enable os port0 0x620 port1 0xa20 port2 0xe20 > quit > which i suspect needs to be run. > > dmesg appended. > > randy > > > > Copyright (c) 1992-1999 FreeBSD Inc. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 4.0-CURRENT #0: Wed Jan 27 14:27:50 PST 1999 > root@rip.psg.com:/usr/src/sys/compile/RIP > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 300683703 Hz > CPU: Pentium II (quarter-micron) (300.68-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x651 Stepping=1 > Features=0x183fbff> > real memory = 134217728 (131072K bytes) > config> quit > avail memory = 127856640 (124860K bytes) > Preloaded elf kernel "kernel" at 0xf02ab000. > ccd0-5: Concatenated disk drivers > Probing for devices on PCI bus 0: > chip0: rev 0x02 on pci0.0.0 > chip1: rev 0x02 on pci0.1.0 > chip2: rev 0x02 on pci0.4.0 > chip3: rev 0x02 on pci0.4.3 > ahc0: tec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 15 on pci0.6.0 > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs > fxp0: rev 0x05 int a irq 15 on pci0.9.0 > fxp0: Ethernet address 00:a0:c9:df:c8:4e > bktr0: rev 0x02 int a irq 10 on pci0.10.0 > bti2c0: > iicbb0: on bti2c0 > iicbus0: on iicbb0 master-only > iicsmb0: on iicbus0 > smbus0: on iicsmb0 > smb0: on smbus0 > iic0: on iicbus0 > smbus1: on bti2c0 > smb1: on smbus1 > Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c stereo. > Probing for devices on PCI bus 1: > vga0: rev 0x00 int a irq 11 on pci1.0.0 > Probing for PnP devices: > CSN 1 Vendor ID: CTL00c3 [0xc3008c0e] Serial 0x1fd0a682 Comp ID: PNPb02f [0x2fb0d041] > pcm1 (SB16pnp > sn 0x1fd0a682) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa > Probing for devices on the ISA bus: > sc0 on isa > sc0: VGA color <16 virtual consoles, flags=0x0> > atkbdc0 at 0x60-0x6f on motherboard > atkbd0 irq 1 on isa > psm0 irq 12 on isa > psm0: model Generic PS/2 mouse, device ID 0 > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 16550A > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A > pcm0 not probed due to drq conflict with pcm1 at 1 > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wl0 at 0x300-0x30f irq 7 on isa > wl0: address 08:00:6a:2b:dd:a7, NWID 0xaaaa > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > npx0 on motherboard > npx0: INT 16 interface > Waiting 15 seconds for SCSI devices to settle > changing root device to da0s1a > da1 at ahc0 bus 0 target 1 lun 0 > da1: Fixed Direct Access SCSI-2 device > da1: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled > da1: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) > da0 at ahc0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled > da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) > cd0 at ahc0 bus 0 target 4 lun 0 > cd0: Removable CD-ROM SCSI-2 device > cd0: 20.0MB/s transfers (20.0MHz, offset 16) > cd0: Attempt to query device size failed: NOT READY, Medium not present > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-multimedia" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message