Date: Tue, 23 Sep 2003 20:17:44 -0400 From: Mike Tancsa <mike@sentex.net> To: "J.A. Terranson" <measl@mfn.org> Cc: freebsd-questions@freebsd.org Subject: Re: WD drivers: Gone completely in 5.x? Message-ID: <6.0.0.22.0.20030923201347.02c8a6b0@209.112.4.2> In-Reply-To: <Pine.BSF.4.21.0309231852180.17575-100000@greeves.mfn.org> References: <6.0.0.22.0.20030923195126.08f946b8@209.112.4.2> <Pine.BSF.4.21.0309231852180.17575-100000@greeves.mfn.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Sounds like you are out of luck. Perhaps the other OSes that work for you
is the way to go.
---Mike
At 08:00 PM 23/09/2003, J.A. Terranson wrote:
>On Tue, 23 Sep 2003, Mike Tancsa wrote:
>
> > What hardware do you have that does not work with the ata drivers ?
>
>Mike, I don't want to get into a flame war here, as I've already been through
>this when the ATA drivers were first released: no matter what hardware I've
>used them with, I've had issues. The oldest I can understand, but I gave it
>another go two weeks ago with modern, brand new hardware (a new SiS based
>Asus that was on the HCL when I bought it, and a Maxtor 40g IDE) and had the
>same results. The 4.8 was rebuilt last night with WD drivers, and the 5.1
>was *supposed* to be rebuilt tonight, thus my email. The ATA drivers are
>buggy has hell, regardless of all the screaming I've heard to the
>contrary: timeouts, with or without DMA disabled, hard write errors, etc. I
>just can't do it - especially since I am constantly told the drivers are
>good, and my hardware is bad: if I take the setup that dies under ATA and
>load either WD or *any other OS*, they work flawlessly.
>
>I am a FBSD shop, have been since 2.2.5R, but I cannot use the ATA drivers -
>I need something reliable (speed is irrelevant if it doesn't work).
>
>Hrmmm.... I wasn't meaning to rant on you. I just looked up and there it was
>:-( Sorry... Frustration.
>
> >
> > ---Mike
>
>//Alif
>
>
>
> > At 07:40 PM 23/09/2003, J.A. Terranson wrote:
> >
> > >Yes, I know they are obsolete. Nevertheless, they have their place, and I
> > >have no been able to get a config to run against a wd specifying
> conf-file.
> > >
> > >Are they truly gone, or is there a magic chicken I can wave over the
> configs
> > >to make them work yet again?
> > >
> > >I am not subbed to the list, so please reply directly as well as to
> the list.
> > >
> > >Thanks!!!
> > >
> > >--
> > >Yours,
> > >J.A. Terranson
> > >sysadmin@mfn.org
> > >
> > > "Every living thing dies alone."
> > > Donnie Darko
> > >
> > >_______________________________________________
> > >freebsd-questions@freebsd.org mailing list
> > >http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > >To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe@freebsd.org"
> >
> >
>
>--
>Yours,
>J.A. Terranson
>sysadmin@mfn.org
>
> "Every living thing dies alone."
> Donnie Darko
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.0.20030923201347.02c8a6b0>