Date: Wed, 28 Dec 2005 14:41:30 +0000 From: eoghan <freebsd@redry.net> To: Tofik Suleymanov <secnews@oxygen.az> Cc: freebsd <freebsd-questions@freebsd.org> Subject: Re: dvd drive Message-ID: <42AA7A5B-953E-4148-B950-9DF672ADE4A8@redry.net> In-Reply-To: <43B2B55B.3040904@oxygen.az> References: <244E8E94-A4F7-48B9-B527-06EF505B3BC9@redry.net> <43B2B55B.3040904@oxygen.az>
next in thread | previous in thread | raw e-mail | index | archive | help
On 28 Dec 2005, at 15:55, Tofik Suleymanov wrote: > eoghan wrote: > >> Hello >> Im wondering how to tell freeBSD about my 2 dvd drives. k3b >> automatically detects them but it hasnt found either. >> Thanks >> Eoghan >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to "freebsd-questions- >> unsubscribe@freebsd.org" >> > Post your dmesg output here. > I have copied it below, thanks: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Sun Dec 4 17:43:10 UTC 2005 root@nathaniel:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 1400MHz (1395.76-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf07 Stepping = 7 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 402157568 (383 MB) avail memory = 384102400 (366 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL DIM 8100> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 3 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link5: <ACPI PCI Link LNKF> on acpi0 pci_link6: <ACPI PCI Link LNKG> on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82850 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 fwohci0: <VIA Fire II (VT6306)> port 0xec80-0xecff mem 0xff1ff800-0xff1fffff irq 10 at device 8.0 on pci2 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:11:06:00:00:99:d9:eb fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:06:99:d9:eb fwe0: Ethernet address: 02:11:06:99:d9:eb fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci2: <multimedia, audio> at device 10.0 (no driver attached) pci2: <simple comms> at device 11.0 (no driver attached) xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem 0xff1ff400-0xff1ff47f irq 11 at device 12.0 on pci2 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:b0:d0:e7:e9:7d isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xff80-0xff9f irq 11 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xff60-0xff7f irq 9 at device 31.4 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcbfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1395762544 Hz quality 800 Timecounters tick every 1.000 msec ad0: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> ad0: 19470MB <QUANTUM FIREBALLlct20 20 APL.0900> at ata0-master UDMA100 ad1: 78167MB <Maxtor 4R080J0 RAMB1TU0> at ata0-slave UDMA100 acd0: DVDROM <NEC DV-5800A/1.07> at ata1-master UDMA33 acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33 Trying to mount root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42AA7A5B-953E-4148-B950-9DF672ADE4A8>