Date: Mon, 18 Dec 2000 00:36:42 +0800 From: "Rosli Sukri" <rosli@skali.net> To: <questions@freebsd.org> Subject: rebooting problem with alpha 1000A 5/333 machine Message-ID: <200012180036.AA63177046@skali.net>
next in thread | raw e-mail | index | archive | help
HI All, I have a FreeBSD 4.2 installed on a Alpha 1000A 5/333 machine - everything works fine except that it couldn't do a complete reboot when we issue the reboot or shutdown -r command. It complains of TU PCI Bus Error : CSR5 : ffffffff any one out there can help me with this problem - the thing is that the same machine could reboot from the command line easily when using Dec Unix or even Linux - Rather annoying Attached will be the dmesg help please - Truly Rosli Sukri -------------------------------------------------------- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Fri Dec 15 05:54:57 MYT 2000 root@fuji.altek.com.my:/usr/src/sys/compile/GENERIC AlphaServer 1000/1000A AlphaServer 1000A 5/300, 300MHz 8192 byte page size, 1 processor. CPU: EV5 (21164) major=5 minor=5 OSF PAL rev: 0x1000600020117 real memory = 65019904 (63496K bytes) avail memory = 57032704 (55696K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000766000. md0: Malloc disk cia0: ALCOR/ALCOR2, pass 3 cia0: extended capabilities: 20<DWEN> pcib0: <2117x PCI host bus adapter> on cia0 pci0: <PCI bus> on pcib0 isab0: <Intel 82375EB PCI-EISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pcib1: <DEC 21050 PCI-PCI bridge> at device 8.0 on pci0 pci2: <PCI bus> on pcib1 isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x9000-0x90ff mem 0x81010000-0x81010fff irq 0 at device 0.0 on pci2 isp0: interrupting at CIA irq 0 de0: <Digital 21140 Fast Ethernet> port 0x10000-0x1007f mem 0x81100000-0x8110007f irq 1 at device 11.0 on pci0 de0: interrupting at CIA irq 1 de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2 de0: address 00:00:f8:03:4e:db de0: enabling 10baseT port fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: interrupting at ISA irq 1 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: cannot reserve interrupt, failed. lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 ppc0: interrupting at ISA irq 7 Timecounter "alpha" frequency 300022344 Hz Waiting 15 seconds for SCSI devices to settle isp0: 0.2 get user period 0x19 offset 0xc flags 0xfd00 isp0: 0.2 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.2 set current period 0x19 offset 0xc flags 0xfd00 isp0: 0.1 get user period 0x19 offset 0xc flags 0xfd00 isp0: 0.1 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.1 set current period 0x19 offset 0xc flags 0xdd00 isp0: 0.5 get user period 0x19 offset 0xc flags 0xfd00 isp0: 0.5 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.5 set current period 0x19 offset 0xc flags 0xd500 isp0: Auto Request Sense failed for 0.2.1 isp0: Auto Request Sense failed for 0.2.1 isp0: Auto Request Sense failed for 0.2.1 isp0: Auto Request Sense failed for 0.2.1 isp0: Auto Request Sense failed for 0.2.1 isp0: Auto Request Sense failed for 0.2.2 isp0: Auto Request Sense failed for 0.2.2 isp0: Auto Request Sense failed for 0.2.2 isp0: Auto Request Sense failed for 0.2.2 isp0: Auto Request Sense failed for 0.2.2 isp0: Auto Request Sense failed for 0.2.3 isp0: Auto Request Sense failed for 0.2.3 isp0: Auto Request Sense failed for 0.2.3 isp0: Auto Request Sense failed for 0.2.3 isp0: Auto Request Sense failed for 0.2.3 isp0: Auto Request Sense failed for 0.2.4 isp0: Auto Request Sense failed for 0.2.4 isp0: Auto Request Sense failed for 0.2.4 isp0: Auto Request Sense failed for 0.2.4 isp0: Auto Request Sense failed for 0.2.4 isp0: Auto Request Sense failed for 0.2.5 isp0: Auto Request Sense failed for 0.2.5 isp0: Auto Request Sense failed for 0.2.5 isp0: Auto Request Sense failed for 0.2.5 isp0: Auto Request Sense failed for 0.2.5 isp0: Auto Request Sense failed for 0.2.6 isp0: Auto Request Sense failed for 0.2.6 isp0: Auto Request Sense failed for 0.2.6 isp0: Auto Request Sense failed for 0.2.6 isp0: Auto Request Sense failed for 0.2.6 isp0: Auto Request Sense failed for 0.2.7 isp0: Auto Request Sense failed for 0.2.7 isp0: Auto Request Sense failed for 0.2.7 isp0: Auto Request Sense failed for 0.2.7 isp0: Auto Request Sense failed for 0.2.7 Mounting root from ufs:/dev/da0a da0 at isp0 bus 0 target 1 lun 0 da0: <DEC RZ29B (C) DEC 0016> Fixed Direct Access SCSI-2 device isp0: Auto Request Sense failed for 0.2.0 isp0: 0.1 get current period 0x19 offset 0xc flags 0xdd00 da0: 10.000MB/s transfers (10.000MHz, offset 12), Tagged Queueing Enabled da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) (cd0:isp0:0:5:0): got CAM status 0x50 (cd0:isp0:0:5:0): fatal error, failed to attach to device (cd0:isp0:0:5:0): lost device isp0: Auto Request Sense failed for 0.2.0 (cd0:isp0:0:5:0): removing device entry isp0: Auto Request Sense failed for 0.2.0 isp0: Auto Request Sense failed for 0.2.0 (da1:isp0:0:2:0): got CAM status 0x4c (da1:isp0:0:2:0): fatal error, failed to attach to device (da1:isp0:0:2:0): lost device (da1:isp0:0:2:0): removing device entry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200012180036.AA63177046>