Date: Tue, 8 May 2018 17:39:41 -0700 (PDT) From: "Rodney W. Grimes" <freebsd-rwg@pdx.rh.CN85.dnsmgr.net> To: Gary Palmer <gpalmer@freebsd.org> Cc: Grzegorz Junka <list1@gjunka.com>, freebsd-infiniband@freebsd.org, freebsd-net@freebsd.org Subject: Re: Unrecognized Inifiniband HCA Message-ID: <201805090039.w490dfXn063341@pdx.rh.CN85.dnsmgr.net> In-Reply-To: <20180508234225.GA13355@in-addr.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> On Tue, May 08, 2018 at 08:59:20PM +0000, Grzegorz Junka wrote: > > Hi All, > > > > pciconf -lv > > > > gives me > > > > none1@pci0:3:0:0:???????????? class=0x0c0600 card=0x000315b3 chip=0x634015b3 > > rev=0xa0 hdr=0x00 > > ?????? vendor???????? = 'Mellanox Technologies' > > ?????? device???????? = 'MT25408 [ConnectX VPI - IB SDR / 10GigE]' > > ?????? class?????????? = serial bus > > > > Does it mean that my card is unrecognized? It supposed to be 10GB x 2 > > Infiniband PCI-E HCA 500EX-D Dual-Port Card Mellanox Firmware. Currently > > the card doesn't show when doing ifconfig. What should I do to have the > > proper device name instead of none1 or for the card to appear in ifconfig? > > > > # kldstat > > Id Refs Address?????????????????????? Size???????? Name > > ??1???? 28 0xffffffff80200000 1f67a88?? kernel > > ??2?????? 1 0xffffffff82169000 316708???? zfs.ko > > ??3?????? 2 0xffffffff82480000 cb78???????? opensolaris.ko > > ??4?????? 1 0xffffffff8248d000 42c28?????? mps.ko > > ??5?????? 1 0xffffffff82621000 bdb0???????? if_lagg.ko > > ??6?????? 1 0xffffffff8262d000 3650???????? ums.ko > > ??7?????? 1 0xffffffff82631000 6679???????? nullfs.ko > > ??8?????? 1 0xffffffff82638000 bdfe???????? unionfs.ko > > ??9?????? 2 0xffffffff82644000 2094f?????? mlx5.ko > > 10?????? 2 0xffffffff82665000 103e1?????? linuxkpi.ko > > 11?????? 1 0xffffffff82676000 15965?????? mlx5en.ko > > mlx5en is for ConnectX-4. I think that's an older card. Try mlx4en, > which supports ConnectX-2 and ConnectX-3. >From a quick grep this infact should be supported by the mlx4/mlx5en drivers: net/mlx4/main.c: /* MT25408 "Hermon" SDR */ net/mlx4/main.c: /* MT25408 "Hermon" DDR */ net/mlx4/main.c: /* MT25408 "Hermon" QDR */ net/mlx4/main.c: /* MT25408 "Hermon" DDR PCIe gen2 */ net/mlx4/main.c: /* MT25408 "Hermon" QDR PCIe gen2 */ net/mlx4/main.c: /* MT25408 "Hermon" EN 10GigE */ net/mlx4/main.c: /* MT25408 "Hermon" EN 10GigE PCIe gen2 */ > > Regards, > > Gary -- Rod Grimes rgrimes@freebsd.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201805090039.w490dfXn063341>