Date: Fri, 30 Oct 2015 10:54:56 +0200 From: Vikash Badal <vikashb@where-ever.za.net> To: freebsd-x11@freebsd.org Subject: Testing the new i915 driver Kernel: 72bb3b3f9dcaf573be532ced9043eb59dedf21df Userland: r290134 Message-ID: <56333060.9030102@where-ever.za.net> In-Reply-To: <56320B91.10502@where-ever.za.net> References: <56320B91.10502@where-ever.za.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] As requested from https://wiki.freebsd.org/Graphics/Update%20i915%20GPU%20driver%20to%20Linux%203.8 Attached dmesg and Xorg.log Only issue i had so far was with wine and world of warcraft ( not local to FreeBSD ) playing videos via mplayer have been. have not done any further testing, Please let me know if you need more information Regards Vikash [-- Attachment #2 --] [ 331.084] X.Org X Server 1.17.2 Release Date: 2015-06-16 [ 331.084] X Protocol Version 11, Revision 0 [ 331.084] Build Operating System: FreeBSD 11.0-CURRENT amd64 [ 331.084] Current Operating System: FreeBSD m3800.where-ever.za.net 11.0-CURRENT FreeBSD 11.0-CURRENT #1 6af4d3c(drm-i915-update-38): Thu Oct 29 13:22:10 SAST 2015 root@m3800.where-ever.za.net:/usr/obj/usr/freebsd-base-graphics/sys/GENERIC amd64 [ 331.085] Build Date: 29 October 2015 11:07:14AM [ 331.085] [ 331.085] Current version of pixman: 0.32.8 [ 331.085] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 331.085] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 331.086] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 29 13:45:28 2015 [ 331.087] (==) Using config file: "/etc/X11/xorg.conf" [ 331.088] (==) ServerLayout "X.org Configured" [ 331.088] (**) |-->Screen "Screen0" (0) [ 331.088] (**) | |-->Monitor "Monitor0" [ 331.089] (**) | |-->Device "Card0" [ 331.089] (**) |-->Screen "Screen1" (1) [ 331.089] (**) | |-->Monitor "Monitor1" [ 331.089] (**) | |-->Device "Card1" [ 331.089] (**) |-->Screen "Screen2" (2) [ 331.089] (**) | |-->Monitor "Monitor2" [ 331.090] (**) | |-->Device "Card2" [ 331.090] (**) |-->Input Device "Mouse0" [ 331.090] (**) |-->Input Device "Keyboard0" [ 331.090] (==) Automatically adding devices [ 331.090] (==) Automatically enabling devices [ 331.090] (==) Not automatically adding GPU devices [ 331.091] (**) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/, /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/ [ 331.091] (**) ModulePath set to "/usr/local/lib/xorg/modules" [ 331.092] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 331.092] (WW) Disabling Mouse0 [ 331.092] (WW) Disabling Keyboard0 [ 331.092] (II) Loader magic: 0x809bf0 [ 331.092] (II) Module ABI versions: [ 331.092] X.Org ANSI C Emulation: 0.4 [ 331.092] X.Org Video Driver: 19.0 [ 331.092] X.Org XInput driver : 21.0 [ 331.092] X.Org Server Extension : 9.0 [ 331.093] (--) PCI:*(0:0:2:0) 8086:0416:1028:060d rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536 [ 331.093] (--) PCI: (0:2:0:0) 10de:0ff6:1028:060d rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128 [ 331.094] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 331.094] (II) LoadModule: "glx" [ 331.095] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 331.102] (II) Module glx: vendor="X.Org Foundation" [ 331.102] compiled for 1.17.2, module version = 1.0.0 [ 331.102] ABI class: X.Org Server Extension, version 9.0 [ 331.102] (==) AIGLX enabled [ 331.102] (II) LoadModule: "nv" [ 331.103] (II) Loading /usr/local/lib/xorg/modules/drivers/nv_drv.so [ 331.103] (II) Module nv: vendor="X.Org Foundation" [ 331.103] compiled for 1.17.2, module version = 2.1.20 [ 331.104] Module class: X.Org Video Driver [ 331.104] ABI class: X.Org Video Driver, version 19.0 [ 331.104] (II) LoadModule: "intel" [ 331.105] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 331.105] (II) Module intel: vendor="X.Org Foundation" [ 331.106] compiled for 1.17.2, module version = 2.21.15 [ 331.106] Module class: X.Org Video Driver [ 331.106] ABI class: X.Org Video Driver, version 19.0 [ 331.106] (II) LoadModule: "vesa" [ 331.107] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 331.107] (II) Module vesa: vendor="X.Org Foundation" [ 331.107] compiled for 1.17.2, module version = 2.3.4 [ 331.107] Module class: X.Org Video Driver [ 331.107] ABI class: X.Org Video Driver, version 19.0 [ 331.108] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420, GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go, GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL, GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL, GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X, GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL, Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL, Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X, GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL, Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra, GeForce FX 5800, Quadro FX 2000, Quadro FX 1000, GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT, GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700, GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M, Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra, GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra, GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700, GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700, Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800, GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT, GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000, GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT, GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400, Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT, GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600, GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL, GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550, Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500, GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM), GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400, GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX, GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800, GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE, GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2, GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150, Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100, GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400, GeForce 6100 nForce 420, GeForce 7150M / nForce 630M, GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a, GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a, GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS, GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS, GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330, GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260, GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295, Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800, Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512, GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2, GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX, GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT, GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M, GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+, GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250, GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2, Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M, Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS, GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140, GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS, GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT, GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO, GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT, GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS, GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT, GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M, GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S, Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT, Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400, GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100, GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M, Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M, Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200, GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200, nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a, GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M, GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI, GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200, GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200, GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE, ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M, GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M, GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M, GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210, GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M, NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M, GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M, Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320, GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M, GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M, GeForce GTS 360M, Quadro FX 1800M [ 331.162] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 331.168] (II) VESA: driver for VESA chipsets: vesa [ 331.168] (--) Using syscons driver with X support (version 2.0) [ 331.168] (--) using VT number 9 [ 331.205] (WW) NV: Ignoring unsupported device 0x10de0ff6 (GK107GLM [Quadro K1100M]) at 02@00:00:0 [ 331.209] (WW) Falling back to old probe method for vesa [ 331.209] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 331.210] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 331.210] (==) intel(0): RGB weight 888 [ 331.210] (==) intel(0): Default visual is TrueColor [ 331.211] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600 [ 331.212] (**) intel(0): Relaxed fencing enabled [ 331.212] (**) intel(0): Wait on SwapBuffers? enabled [ 331.212] (**) intel(0): Triple buffering? enabled [ 331.212] (**) intel(0): Framebuffer tiled [ 331.212] (**) intel(0): Pixmaps tiled [ 331.212] (**) intel(0): 3D buffers tiled [ 331.212] (**) intel(0): SwapBuffers wait enabled [ 331.213] (==) intel(0): video overlay key set to 0x101fe [ 331.215] (II) intel(0): Output eDP1 using monitor section Monitor1 [ 331.221] (II) intel(0): Output HDMI1 has no monitor section [ 331.230] (II) intel(0): Output DP1 has no monitor section [ 331.236] (II) intel(0): Output HDMI2 has no monitor section [ 331.245] (II) intel(0): Output DP2 has no monitor section [ 331.248] (II) intel(0): EDID for output eDP1 [ 331.248] (II) intel(0): Manufacturer: AUO Model: 11ed Serial#: 0 [ 331.248] (II) intel(0): Year: 2013 Week: 0 [ 331.248] (II) intel(0): EDID Version: 1.4 [ 331.248] (II) intel(0): Digital Display Input [ 331.248] (II) intel(0): 6 bits per channel [ 331.248] (II) intel(0): Digital interface is DisplayPort [ 331.248] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 331.249] (II) intel(0): Gamma: 2.20 [ 331.249] (II) intel(0): No DPMS capabilities specified [ 331.249] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 331.249] (II) intel(0): First detailed timing is preferred mode [ 331.249] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 331.249] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.320 greenY: 0.600 [ 331.249] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 331.249] (II) intel(0): Manufacturer's mask: 0 [ 331.250] (II) intel(0): Supported detailed timing: [ 331.250] (II) intel(0): clock: 141.0 MHz Image Size: 344 x 193 mm [ 331.250] (II) intel(0): h_active: 1920 h_sync: 1936 h_sync_end 1952 h_blank_end 2104 h_border: 0 [ 331.250] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1097 v_blanking: 1116 v_border: 0 [ 331.250] (II) intel(0): Supported detailed timing: [ 331.250] (II) intel(0): clock: 141.0 MHz Image Size: 344 x 193 mm [ 331.250] (II) intel(0): h_active: 1920 h_sync: 1936 h_sync_end 1952 h_blank_end 2104 h_border: 0 [ 331.250] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1097 v_blanking: 1116 v_border: 0 [ 331.251] (II) intel(0): 51RCY€B156HAN [ 331.251] (II) intel(0): Unknown vendor-specific block 0 [ 331.251] (II) intel(0): EDID (in hex): [ 331.251] (II) intel(0): 00ffffffffffff0006afed1100000000 [ 331.251] (II) intel(0): 001701049522137802e295a354529926 [ 331.251] (II) intel(0): 0f505400000001010101010101010101 [ 331.251] (II) intel(0): 010101010101143780b8703824401010 [ 331.251] (II) intel(0): 3e0058c11000001a143780b870382440 [ 331.251] (II) intel(0): 10103e0058c11000001a000000fe0035 [ 331.252] (II) intel(0): 31524359804231353648414e00000000 [ 331.252] (II) intel(0): 000041029e001000000a010a20200084 [ 331.252] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 331.252] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 331.252] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 331.253] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 331.253] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 331.253] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 331.253] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 331.253] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 331.253] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 331.253] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 331.253] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 331.253] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 331.253] (II) intel(0): Printing probed modes for output eDP1 [ 331.254] (II) intel(0): Modeline "1920x1080"x60.0 141.00 1920 1936 1952 2104 1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP) [ 331.254] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 331.254] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) [ 331.254] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 331.254] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 331.254] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 331.254] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 331.254] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 331.259] (II) intel(0): EDID for output HDMI1 [ 331.269] (II) intel(0): EDID for output DP1 [ 331.274] (II) intel(0): EDID for output HDMI2 [ 331.284] (II) intel(0): EDID for output DP2 [ 331.285] (II) intel(0): Output eDP1 connected [ 331.285] (II) intel(0): Output HDMI1 disconnected [ 331.285] (II) intel(0): Output DP1 disconnected [ 331.285] (II) intel(0): Output HDMI2 disconnected [ 331.285] (II) intel(0): Output DP2 disconnected [ 331.285] (II) intel(0): Using exact sizes for initial modes [ 331.285] (II) intel(0): Output eDP1 using initial mode 1920x1080 [ 331.286] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 331.286] (II) intel(0): Kernel page flipping support detected, enabling [ 331.286] (==) intel(0): DPI set to (96, 96) [ 331.286] (II) Loading sub module "fb" [ 331.286] (II) LoadModule: "fb" [ 331.287] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 331.288] (II) Module fb: vendor="X.Org Foundation" [ 331.288] compiled for 1.17.2, module version = 1.0.0 [ 331.289] ABI class: X.Org ANSI C Emulation, version 0.4 [ 331.289] (II) Loading sub module "dri2" [ 331.289] (II) LoadModule: "dri2" [ 331.289] (II) Module "dri2" already built-in [ 331.289] (II) UnloadModule: "vesa" [ 331.289] (II) Unloading vesa [ 331.290] (==) Depth 24 pixmap format is 32 bpp [ 331.290] (II) intel(0): [DRI2] Setup complete [ 331.290] (II) intel(0): [DRI2] DRI driver: i965 [ 331.290] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 331.318] (II) UXA(0): Driver registered support for the following operations: [ 331.318] (II) solid [ 331.319] (II) copy [ 331.319] (II) composite (RENDER acceleration) [ 331.319] (II) put_image [ 331.319] (II) get_image [ 331.319] (==) intel(0): Backing store enabled [ 331.319] (==) intel(0): Silken mouse enabled [ 331.319] (II) intel(0): Initializing HW Cursor [ 331.319] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 331.322] (==) intel(0): DPMS enabled [ 331.322] (==) intel(0): Intel XvMC decoder enabled [ 331.322] (II) intel(0): Set up textured video [ 331.322] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 331.322] (II) intel(0): direct rendering: DRI2 Enabled [ 331.337] (--) RandR disabled [ 331.391] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 331.391] (II) AIGLX: enabled GLX_ARB_create_context [ 331.391] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 331.391] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 331.391] (II) AIGLX: enabled GLX_INTEL_swap_event [ 331.391] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 331.391] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 331.391] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 331.391] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 331.392] (II) AIGLX: Loaded and initialized i965 [ 331.392] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 331.392] (II) intel(0): Setting screen physical size to 508 x 285 [ 331.503] (II) config/devd: probing input devices... [ 331.503] (II) config/devd: adding input device (null) (/dev/kbdmux) [ 331.503] (II) LoadModule: "kbd" [ 331.503] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 331.503] (II) Module kbd: vendor="X.Org Foundation" [ 331.503] compiled for 1.17.2, module version = 1.8.1 [ 331.503] Module class: X.Org XInput Driver [ 331.503] ABI class: X.Org XInput driver, version 21.0 [ 331.503] (II) Using input driver 'kbd' for 'kbdmux' [ 331.504] (**) kbdmux: always reports core events [ 331.504] (**) kbdmux: always reports core events [ 331.504] (**) Option "Protocol" "standard" [ 331.504] (**) Option "XkbRules" "base" [ 331.504] (**) Option "XkbModel" "pc105" [ 331.504] (**) Option "XkbLayout" "us" [ 331.504] (**) Option "config_info" "devd:kbdmux" [ 331.504] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6) [ 331.530] (II) config/devd: kbdmux is enabled, ignoring device atkbd0 [ 331.531] (II) config/devd: adding input device (null) (/dev/sysmouse) [ 331.531] (II) LoadModule: "mouse" [ 331.531] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 331.531] (II) Module mouse: vendor="X.Org Foundation" [ 331.531] compiled for 1.17.2, module version = 1.9.1 [ 331.531] Module class: X.Org XInput Driver [ 331.531] ABI class: X.Org XInput driver, version 21.0 [ 331.531] (II) Using input driver 'mouse' for 'sysmouse' [ 331.531] (**) sysmouse: always reports core events [ 331.531] (**) Option "Device" "/dev/sysmouse" [ 331.531] (==) sysmouse: Protocol: "Auto" [ 331.531] (**) sysmouse: always reports core events [ 331.531] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50 [ 331.531] (**) sysmouse: ZAxisMapping: buttons 4 and 5 [ 331.531] (**) sysmouse: Buttons: 5 [ 331.531] (**) Option "config_info" "devd:sysmouse" [ 331.531] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7) [ 331.532] (**) sysmouse: (accel) keeping acceleration scheme 1 [ 331.532] (**) sysmouse: (accel) acceleration profile 0 [ 331.532] (**) sysmouse: (accel) acceleration factor: 2.000 [ 331.532] (**) sysmouse: (accel) acceleration threshold: 4 [ 331.532] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0 [ 331.532] (II) sysmouse: SetupAuto: protocol is SysMouse [ 331.532] (II) config/devd: device /dev/psm0 already opened [ 335.390] (II) config/devd: terminating backend... [ 335.391] (II) UnloadModule: "mouse" [ 335.391] (II) UnloadModule: "kbd" [ 336.466] (II) Server terminated successfully (0). Closing log file. [-- Attachment #3 --] Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #1 6af4d3c(drm-i915-update-38): Thu Oct 29 13:22:10 SAST 2015 root@m3800.where-ever.za.net:/usr/obj/usr/freebsd-base-graphics/sys/GENERIC amd64 FreeBSD clang version 3.7.0 (tags/RELEASE_370/final 246257) 20150906 WARNING: WITNESS option enabled, expect reduced performance. VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i7-4702HQ CPU @ 2.20GHz (2194.96-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8152444928 (7774 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL CL09> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80edc4f0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <DELL CL09 > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Haswell GT2 mobile> on vgapci1 agp0: aperture size is 256M, detected 32764k stolen memory vgapci1: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xf7a1c000-0xf7a1ffff irq 16 at device 3.0 on pci0 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7a00000-0xf7a0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7a24000-0xf7a243ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 hdac1: <Intel Lynx Point HDA Controller> mem 0xf7a18000-0xf7a1bfff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <unknown> at device 0.0 (no driver attached) ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7a23000-0xf7a233ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7a22000-0xf7a227ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 ppc0: cannot reserve I/O port range coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 coretemp4: <CPU On-Die Thermal Sensors> on cpu4 est4: <Enhanced SpeedStep Frequency Control> on cpu4 coretemp5: <CPU On-Die Thermal Sensors> on cpu5 est5: <Enhanced SpeedStep Frequency Control> on cpu5 coretemp6: <CPU On-Die Thermal Sensors> on cpu6 est6: <Enhanced SpeedStep Frequency Control> on cpu6 coretemp7: <CPU On-Die Thermal Sensors> on cpu7 est7: <Enhanced SpeedStep Frequency Control> on cpu7 usbus0: 5.0Gbps Super Speed USB v3.0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Realtek (0x0668) HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek (0x0668) Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek (0x0668) (Analog 2.0+HP/2.0)> at nid 20,21 and 18 on hdaa1 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 acpi_tz1: _TMP value is absurd, ignored (-265.7C) ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST500LM000-1EJ162 DEMC> ACS-2 ATA SATA 3.x device ada0: Serial Number W7656J5H ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) SMP: AP CPU #1 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1097481429 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. Root mount waiting for: usbus2 usbus1 usbus0 uhub2: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub0: 21 ports with 21 removable, self powered Root mount waiting for: usbus2 usbus1 usbus0 ugen0.2: <ASIX Elec. Corp.> at usbus0 ugen2.2: <vendor 0x8087> at usbus2 uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 ugen1.2: <vendor 0x8087> at usbus1 uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 uhub4: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered Root mount waiting for: usbus0 usb_alloc_device: Failure selecting configuration index 0:USB_ERR_IOERROR, port 6, addr 2 (ignored) ugen0.3: <vendor 0x06cb> at usbus0 Root mount waiting for: usbus0 usb_alloc_device: set address 4 failed (USB_ERR_TIMEOUT, ignored) Root mount waiting for: usbus0 usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT Root mount waiting for: usbus0 usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT Root mount waiting for: usbus0 Root mount waiting for: usbus0 usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT Root mount waiting for: usbus0 Root mount waiting for: usbus0 usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT Root mount waiting for: usbus0 Root mount waiting for: usbus0 usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT ugen0.4: <Unknown> at usbus0 (disconnected) uhub_reattach_port: could not allocate new device Root mount waiting for: usbus0 ugen0.4: <CN0Y2TKG7248741DAH15A00> at usbus0 Trying to mount root from zfs:zroot/ROOT/default []... axge0: <NetworkInterface> on usbus0 miibus0: <MII bus> on axge0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow ue0: <USB Ethernet> on axge0 ue0: Ethernet address: 50:3f:56:01:14:87 ue0: link state changed to DOWN ue0: link state changed to UP KLD nvidia.ko: depends on kernel - not available or version mismatch linker_load_file: Unsupported file type info: [drm] Initialized drm 1.1.0 20060810 [drm:pid843:drm_probe_helper] drmn1 desc: Intel Haswell (GT2 mobile) drmn1: <Intel Haswell (GT2 mobile)> on vgapci1 [drm:pid843:drm_get_pci_dev] [drm:pid843:drm_ctxbitmap_next] bit : 0 [drm:pid843:drm_ctxbitmap_init] drm_ctxbitmap_init : 0 [drm:pid843:drm_get_minor] [drm:pid843:drm_get_minor] new minor assigned 65 [drm:pid843:drm_get_minor] [drm:pid843:drm_get_minor] new minor assigned 1 [drm:KMS:pid843:i915_dump_device_info] i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_force_wake,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,info: [drm] Memory usable by graphics device = 2048M [drm:KMS:pid843:i915_gem_gtt_init] GMADR size = 256M [drm:KMS:pid843:i915_gem_gtt_init] GTT stolen size = 0M [drm:pid843:drm_addmap_core] offset = 0xf7400000, size = 0x00200000, type = 1 info: [drm] MTRR allocation failed. Graphics performance may suffer. [drm:KMS:pid843:intel_detect_pch] Found LynxPoint PCH iicbus0: <Philips I2C bus>error: [drm:pid843:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100 on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 iicbus2: <Philips I2C bus> on iicbb1 addr 0x0 iic2: <I2C generic I/O> on iicbus2 iic3: <I2C generic I/O> on iicbus3 iicbus4: <Philips I2C bus> on iicbb2 addr 0x0 iic4: <I2C generic I/O> on iicbus4 iic5: <I2C generic I/O> on iicbus5 iicbus6: <Philips I2C bus> on iicbb3 addr 0x0 iic6: <I2C generic I/O> on iicbus6 iic7: <I2C generic I/O> on iicbus7 iicbus8: <Philips I2C bus> on iicbb4 addr 0x0 iic8: <I2C generic I/O> on iicbus8 iic9: <I2C generic I/O> on iicbus9 iicbus10: <Philips I2C bus> on iicbb5 addr 0x0 iic10: <I2C generic I/O> on iicbus10 iic11: <I2C generic I/O> on iicbus11 [drm:pid843:intel_opregion_setup] graphic opregion physical addr: 0xcb522018 [drm:pid843:intel_opregion_setup] Public ACPI methods supported [drm:pid843:intel_opregion_setup] SWSCI supported [drm:pid843:intel_opregion_setup] ASLE supported [drm:pid843:drm_pci_enable_msi] MSI count = 1 info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. [drm:KMS:pid843:init_vbt_defaults] Set default to SSC at 100MHz [drm:KMS:pid843:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL d [drm:KMS:pid843:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [drm:KMS:pid843:parse_general_definitions] crt_ddc_bus_pin: 0 [drm:KMS:pid843:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [drm:KMS:pid843:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x8 0xa [drm:KMS:pid843:parse_lfp_panel_data] VBT initial LVDS value 20033c [drm:KMS:pid843:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [drm:KMS:pid843:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [drm:KMS:pid843:parse_sdvo_device_mapping] No SDVO device info is found in VBT [drm:KMS:pid843:intel_modeset_init] 3 display pipes available. [drm:KMS:pid843:intel_ddi_pll_init] CDCLK running at 540MHz [drm:KMS:pid843:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation [drm:KMS:pid843:intel_lvds_init] LVDS is not present in VBT [drm:KMS:pid843:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 200 t9 2000 t10 500 t11_t12 6000 [drm:KMS:pid843:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 200 t9 2000 t10 500 t11_t12 5000 [drm:KMS:pid843:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [drm:KMS:pid843:intel_dp_init_panel_power_sequencer] backlight on delay 20, off delay 200 [drm:KMS:pid843:intel_dp_i2c_init] i2c_init DPDDC-A [drm:KMS:pid843:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid843:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd000f [drm:KMS:pid843:intel_dp_i2c_aux_ch] aux_i2c nack [drm:KMS:pid843:intel_dp_i2c_aux_ch] aux_i2c nack [drm:KMS:pid843:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid843:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid843:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid843:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid843:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d000c8, PP_OFF 0x1f407d0, PP_DIV 0x186906 [drm:KMS:pid843:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid843:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid843:iic_dp_aux_xfer] dp_aux_xfer return 0 [drm:KMS:pid843:iic_dp_aux_xfer] dp_aux_xfer return 0 [drm:KMS:pid843:drm_edid_to_eld] ELD: no CEA Extension found [drm:KMS:pid843:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid843:intel_panel_get_backlight] get backlight PWM = 4942 [drm:KMS:pid843:intel_dp_i2c_init] i2c_init DPDDC-B [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid843:intel_dp_i2c_init] i2c_init DPDDC-C [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_i2c_aux_ch] aux_ch failed -60 drmn1: taking over the fictitious range 0xd0000000-0xe0000000 [drm:KMS:pid843:init_status_page] render ring hws offset: 0x00000000 [drm:KMS:pid843:init_status_page] bsd ring hws offset: 0x00022000 [drm:KMS:pid843:init_status_page] blitter ring hws offset: 0x00043000 [drm:KMS:pid843:create_default_context] Default HW context loaded [drm:KMS:pid843:i915_gem_context_init] HW context support initialized [drm:KMS:pid843:intel_prepare_ddi_buffers] Initializing DDI buffers for port A in DP mode [drm:KMS:pid843:intel_prepare_ddi_buffers] Initializing DDI buffers for port B in DP mode [drm:KMS:pid843:intel_prepare_ddi_buffers] Initializing DDI buffers for port C in DP mode [drm:KMS:pid843:intel_prepare_ddi_buffers] Initializing DDI buffers for port D in DP mode [drm:KMS:pid843:intel_prepare_ddi_buffers] Initializing DDI buffers for port E in FDI mode [drm:KMS:pid843:intel_modeset_setup_hw_state] Pipe A using transcoder EDP [drm:KMS:pid843:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled [drm:KMS:pid843:intel_modeset_setup_hw_state] [CRTC:5] hw state readout: disabled [drm:KMS:pid843:intel_modeset_setup_hw_state] [CRTC:7] hw state readout: disabled [drm:KMS:pid843:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000 [drm:KMS:pid843:intel_modeset_setup_hw_state] [ENCODER:9:TMDS-9] hw state readout: enabled, pipe=0 [drm:KMS:pid843:intel_modeset_setup_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe=0 [drm:KMS:pid843:intel_modeset_setup_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe=0 [drm:KMS:pid843:intel_modeset_setup_hw_state] [CONNECTOR:10:eDP-1] hw state readout: enabled [drm:KMS:pid843:intel_modeset_setup_hw_state] [CONNECTOR:19:HDMI-A-1] hw state readout: disabled [drm:KMS:pid843:intel_modeset_setup_hw_state] [CONNECTOR:20:DP-1] hw state readout: disabled [drm:KMS:pid843:intel_modeset_setup_hw_state] [CONNECTOR:22:HDMI-A-2] hw state readout: disabled [drm:KMS:pid843:intel_modeset_setup_hw_state] [CONNECTOR:23:DP-2] hw state readout: disabled [drm:KMS:pid843:intel_connector_check_state] [CONNECTOR:10:eDP-1] [drm:KMS:pid843:intel_modeset_check_state] [ENCODER:9:TMDS-9] [drm:KMS:pid843:intel_modeset_check_state] [ENCODER:18:TMDS-18] [drm:KMS:pid843:intel_modeset_check_state] [ENCODER:21:TMDS-21] [drm:KMS:pid843:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid843:intel_modeset_check_state] [CRTC:5] [drm:KMS:pid843:intel_modeset_check_state] [CRTC:7] [drm:pid843:drm_irq_install] irq=268 info: [drm] Connector eDP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.eDP-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-2 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DP-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-2 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:10:eDP-1] [drm:KMS:pid843:intel_dp_detect] DPCD: 11 0A FF 41 00 00 01 FF 02 00 00 00 0F 0B 00 [drm:KMS:pid843:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid843:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid843:intel_dp_probe_oui] Sink OUI: 001cf8 [drm:KMS:pid843:intel_dp_probe_oui] Branch OUI: 000000 [drm:KMS:pid843:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid843:drm_edid_to_eld] ELD: no CEA Extension found [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:10:eDP-1] probed modes : [drm:KMS:pid843:drm_mode_debug_printmodeline] Modeline 25:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9 [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] disconnected [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:20:DP-1] [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:20:DP-1] disconnected [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid843:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid843:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] disconnected [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-2] [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid843:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [drm:KMS:pid843:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-2] disconnected [drm:KMS:pid843:drm_setup_crtcs] [drm:KMS:pid843:drm_enable_connectors] connector 10 enabled? yes [drm:KMS:pid843:drm_enable_connectors] connector 19 enabled? no [drm:KMS:pid843:drm_enable_connectors] connector 20 enabled? no [drm:KMS:pid843:drm_enable_connectors] connector 22 enabled? no [drm:KMS:pid843:drm_enable_connectors] connector 23 enabled? no [drm:KMS:pid843:drm_target_preferred] looking for cmdline mode on connector 10 [drm:KMS:pid843:drm_target_preferred] looking for preferred mode on connector 10 [drm:KMS:pid843:drm_target_preferred] found mode 1920x1080 [drm:KMS:pid843:drm_setup_crtcs] picking CRTCs for 8192x8192 config [drm:KMS:pid843:drm_setup_crtcs] desired mode 1920x1080 set on crtc 3 [drm:KMS:pid843:intelfb_create] allocated 1920x1080 (s 24bits) fb: 0x00073000, bo 0xfffff8001e934a00 fbd1 on drmn1 VT: Replacing driver "vga" with new "fb". [drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:12] #connectors=1 (x y) (0 0) [drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set [drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 11:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9 [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3] [drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 11:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9 [drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:KMS:pid0:intel_dp_mode_fixup] DP link computation with max lane count 2 max bw 0a pixel clock 141000KHz [drm:KMS:pid0:intel_dp_mode_fixup] DP link bw 0a lane count 2 clock 270000 bpp 24 [drm:KMS:pid0:intel_dp_mode_fixup] DP link bw required 338400 available 432000 [drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:3] [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0 [drm:KMS:pid0:ironlake_edp_backlight_off] info: [drm] Initialized i915 1.6.0 20080730 for drmn1 on minor 1 [drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode. [drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid0:ironlake_edp_panel_off] Turn eDP power off [drm:KMS:pid0:ironlake_wait_panel_off] Wait for panel power off time [drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 00000000 status 80000008 control abcd0000 [drm:KMS:pid0:intel_enable_rc6] Haswell: only RC6 available info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [drm:pid0:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:KMS:pid0:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) to EDID reported max of 6 [drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 6) [drm:KMS:pid0:haswell_crtc_mode_set] Mode for pipe 0: [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 11:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9 [drm:KMS:pid0:ironlake_update_plane] Writing base 00073000 00000000 0 0 7680 [drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:9:TMDS-9] set [MODE:11:1920x1080] [drm:KMS:pid0:intel_ddi_mode_set] Preparing DDI mode for Haswell on port A, pipe A [drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 16, cursor: 6 [drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle [drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [drm:KMS:pid0:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x00000000 PCH_PP_CONTROL: 0xabcd0008 [drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP was not running [drm:KMS:pid0:ironlake_edp_panel_on] Turn eDP power on [drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle [drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [drm:KMS:pid0:ironlake_wait_panel_on] Wait for panel power on [drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [drm:KMS:pid0:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid0:ironlake_panel_vdd_off_sync] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd0003 [drm:KMS:pid0:intel_dp_start_link_train] training pattern 1 signal levels 00000000 [drm:KMS:pid0:intel_dp_start_link_train] clock recovery OK [drm:KMS:pid0:intel_dp_complete_link_train] Channel EQ done. DP Training successfull [drm:KMS:pid0:ironlake_edp_backlight_on] [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 4942 [drm:pid0:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 2104, vtotal 1116, vdisplay 1080 [drm:pid0:drm_calc_timestamping_constants] crtc 3: clock 270000 kHz framedur 8695872 linedur 7792, pixeldur 3 [drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:10:eDP-1] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:9:TMDS-9] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:18:TMDS-18] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:21:TMDS-21] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:5] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:7] [drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3] [drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56333060.9030102>