Date: Sat, 22 Jan 2005 09:50:09 GMT From: Carsten Menke <bootsy52@gmx.net> To: freebsd-usb@FreeBSD.org Subject: Re: usb/76240: USB camera panics kernel Message-ID: <200501220950.j0M9o94f098233@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR usb/76240; it has been noted by GNATS. From: Carsten Menke <bootsy52@gmx.net> To: freebsd-gnats-submit@FreeBSD.org, marko@FreeBSD.org Cc: Subject: Re: usb/76240: USB camera panics kernel Date: Sat, 22 Jan 2005 09:44:59 +0100 Exactly the same here, before I was running 5.3-RELEASE then at least as root it was possible to use the camera with digikam (I have exactly the same model) and I also have OHCI. After updating yesterday to 5.3-STABLE it now is 100% reproducible as I'm now completley unable to use the camera as every attempt completley freezes the system (no panic though). the only thing I found in the logs is: Jan 18 08:41:57 chantal kernel: ugen0: detached Jan 18 09:34:21 chantal kernel: ugen0: Canon Inc. Canon Digital Camera, rev 1.10/0.01, addr 2 Jan 18 09:34:58 chantal su: chantal to root on /dev/ttyp4 Jan 18 09:34:58 chantal su: chantal to root on /dev/ttyp4 Jan 18 09:41:35 chantal kernel: ugen0: at uhub0 port 1 (addr 2) disconnected Jan 18 09:42:35 chantal kernel: usb_detach_wait: ugen0 didn't detach Jan 18 09:43:35 chantal kernel: usb_detach_wait: ugen0 didn't detach I will try the patch, too. Hope it helps at least a bit. Here is my dmesg: //Carsten Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #6: Thu Jan 20 06:54:05 CET 2005 root@chantal.bootsy.home:/usr/src/sys/i386/compile/BOOTSY52 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) Processor (1394.08-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x644 Stepping = 4 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> real memory = 536805376 (511 MB) avail memory = 515616768 (491 MB) acpi0: <AMIINT SiS735XX> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 11 at device 2.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xcffff000-0xcfffffff irq 5 at device 2.3 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiS 735 UDMA100 controller> port 0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcm0: <SiS 7012> port 0xd800-0xd83f,0xdc00-0xdcff irq 11 at device 2.7 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Realtek ALC100 AC97 Codec> xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xcfffdf80-0xcfffdfff irq 5 at device 11.0 on pci0 miibus0: <MII bus> on xl0 bmtphy0: <3c905B 10/100 internal PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:50:04:50:fb:41 acpi_button0: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1394075963 Hz quality 800 Timecounters tick every 10.000 msec ad0: 58644MB <IC35L060AVV207-0/V22OA66A> [119150/16/63] at ata0-master UDMA100 acd0: CDRW <R/RW 4x4x32/1.4B> at ata1-master PIO4 acd1: CDROM <ATAPI CDROM 48X/V130Y> at ata1-slave UDMA33 cd1 at ata1 bus 0 target 1 lun 0 cd1: < ATAPI CDROM.48X 130Y> Removable CD-ROM SCSI-0 device cd1: 33.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present cd0 at ata1 bus 0 target 0 lun 0 cd0: <IDE-CD R/RW 4x4x32 1.4B> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /home was not properly dismounted /home: mount pending error: blocks 60 files 9 /home: superblock summary recomputed WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 468 files 4 /usr: superblock summary recomputed WARNING: /var was not properly dismounted /var: mount pending error: blocks 2560 files 2 /var: superblock summary recomputed drm0: <ATI Rage 128 RL (AGP)> port 0xb800-0xb8ff mem 0xcfefc000-0xcfefffff,0xc8000000-0xcbffffff irq 5 at device 0.0 on pci1 info: [drm] AGP at 0xd0000000 64MB info: [drm] Initialized r128 2.5.0 20030725 on minor 0 -- "There are two major products that come out of Berkeley: LSD and UNIX. We don't believe this to be a coincidence." --Jeremy S. Anderson
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200501220950.j0M9o94f098233>