Date: Sun, 17 Feb 2002 16:48:50 +0100 (CET) From: Cliff Sarginson <csfbsd@raggedclown.net> To: FreeBSD-gnats-submit@freebsd.org Subject: ports/35050: Failure of port drm-kmod to correctly initialise Message-ID: <20020217154850.213F1225BC@angel.raggedclown.net>
next in thread | raw e-mail | index | archive | help
>Number: 35050
>Category: ports
>Synopsis: Failure of port drm-kmod to correctly initialise
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-ports
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Feb 17 07:50:03 PST 2002
>Closed-Date:
>Last-Modified:
>Originator: Cliff Sarginson
>Release: FreeBSD 4.5-STABLE i386
>Organization:
>Environment:
System: FreeBSD angel.raggedclown.intra 4.5-STABLE FreeBSD 4.5-STABLE #6: Thu Feb 14 07:11:29 CET 2002 toor@angel.raggedclown.intra:/usr/obj/usr/src/sys/ANGEL-S i386
Asus TUSL2-C Socket 370 m/board Intel 815Ep Chipset
Matrox G450 AGP video
>Description:
I installed the drm-kmod port in order to enable DRI in X11.
This fails to initialise properly, under 4.4-RC, 4.5-Release
and the 4.5-Stable releases (as of the last few days).
The ports were cvsuped on 14th February and a re-installation
produced the same problem.
DRI is therefore disabled when starting X11.
Below is the output of the startup messages, dmesg and kldstat -v
-----------------------------------------------------------------
Startup message
---------------
Local package initialization: agpdrm0: <Matrox G400 (AGP)> mem 0xf4800000-0xf4ff
ffff,0xf5000000-0xf5003fff,0xf6000000-0xf7ffffff irq 11 at device 0.0 on pci1
error: [drm:mga_init] *ERROR* Cannot initialize the agpgart module.
device_probe_and_attach: drm0 attach returned 12
dmesg
-----
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #6: Thu Feb 14 07:11:29 CET 2002
toor@angel.raggedclown.intra:/usr/obj/usr/src/sys/ANGEL-S
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1005.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536784896 (524204K bytes)
config> q
avail memory = 518660096 (506504K bytes)
Preloaded elf kernel "kernel" at 0xc0392000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc039209c.
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc00c525f (c000525f)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f13a0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
sym0: <895> port 0xd800-0xd8ff mem 0xf3800000-0xf3800fff,0xf4000000-0xf40000ff irq 9 at device 10.0 on pci2
sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking
rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xf3000000-0xf30000ff irq 9 at device 11.0 on pci2
rl0: Ethernet address: 00:10:a7:05:10:37
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xd000-0xd01f irq 9 at device 12.0 on pci2
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xa800-0xa80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xa400-0xa41f irq 5 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Motorola MC141555 hub controller, class 9/0, rev 1.00/1.00, addr 2
uhub1: 5 ports with 5 removable, self powered
uhub2: Atmel Standard USB Hub, class 9/0, rev 1.10/3.00, addr 3
uhub2: 4 ports with 4 removable, self powered
ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1
ums0: 5 buttons and Z dir.
uhid0: LG Elec?ronics Inc. USB Mon?tor, rev 1.00/1.00, addr 5, iclass 3/0
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xa000-0xa01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xcc000-0xcffff,0xd0000-0xd1fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master UDMA100
ad2: 39082MB <Maxtor 5T040H4> [79406/16/63] at ata1-master UDMA33
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-105S 0111> at ata0-slave using UDMA33
acd1: CD-RW <SONY CD-RW CRX160E> at ata1-slave using UDMA33
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
da0 at sym0 bus 0 target 6 lun 0
da0: <QUANTUM ATLAS_V_18_WLS 0230> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17510MB (35861388 512 byte sectors: 255H 63S/T 2232C)
drm0: <Matrox G400 (AGP)> mem 0xf4800000-0xf4ffffff,0xf5000000-0xf5003fff,0xf6000000-0xf7ffffff irq 11 at device 0.0 on pci1
error: [drm:mga_init] *ERROR* Cannot initialize the agpgart module.
device_probe_and_attach: drm0 attach returned 12
kldstat -v
----------
Id Refs Address Size Name
1 6 0xc0100000 290814 kernel
Contains modules:
Id Name
1 rootbus
2 miibus/inphy
3 miibus/mlphy
4 miibus/nsphy
5 miibus/nsgphy
6 miibus/pnphy
7 miibus/pnaphy
8 miibus/tlphy
9 miibus/rlphy
10 pci/uhci
11 miibus/xmphy
12 miibus/lxtphy
13 miibus/qsphy
14 ohci/usb
15 uhci/usb
16 uhub/ugen
17 uhub/uhid
18 uhub/ums
19 uhub/ulpt
20 usb/uhub
21 uhub/uhub
22 uhub/uscanner
23 miibus/acphy
24 isab/isa
25 nexus/isa
26 isa/isahint
27 isa/orm
28 isa/pnp
29 isa/snd_ad1816
30 isa/snd_es1888
31 sbc/snd_ess
32 isa/esscontrol
33 isa/snd_gusc
34 isa/snd_mss
35 isa/snd_pnpmss
36 gusc/snd_guspcm
37 sbc/snd_sb16
38 sbc/snd_sb8
39 isa/snd_sbc
40 pci/snd_als
41 pci/snd_cmipci
42 pci/snd_cs4281
43 pci/snd_csa
44 csa/snd_csapcm
45 pci/snd_ds1
46 pci/snd_emu10k1
47 pci/emujoy
48 pci/snd_es137x
49 pci/fm801
50 pci/snd_ich
51 pci/snd_maestro
52 pci/snd_neomagic
53 pci/snd_solo
54 pci/snd_t4dwave
55 pci/via
56 pci/snd_sonicvibes
57 pci/if_rl
58 rl/miibus
59 intpm/intsmb
60 pci/intpm
61 pci/if_ncr
62 pci/sym
63 pcib/pci
64 snd_pcm
65 pci/pcib
66 isa/ata
67 pci/atapci
68 atapci/ata
69 pci/isab
70 pci/chip
71 pci/ign
72 miibus/ukphy
73 ppbus/lpt
74 miibus/amphy
75 ppc/ppbus
76 ppbus/ppi
77 iicsmb/smbus
78 bti2c/smbus
79 scterm-sc
80 scrndr-vga
81 intsmb/smbus
82 nexus/apm
83 alsmb/smbus
84 ichsmb/smbus
85 amdsmb/smbus
86 smbus/smb
87 miibus/brgphy
88 miibus/dcphy
89 root/nexus
90 miibus/e1000phy
91 isa/fdc
92 fdc/fd
93 nexus/npx
94 nexus/pcib
95 vesa
96 atkbdc/atkbd
97 miibus/xlphy
98 isa/atkbdc
99 isa/ppc
100 atkbdc/psm
101 isa/sio
102 pci/sio
103 isa/sc
104 isa/vga
105 procfs
106 mfs
107 cd9660
108 ufs
109 nfs
110 ext2fs
111 msdos
112 if_ppp
113 if_sl
114 if_faith
115 if_tun
116 if_gif
117 if_loop
118 shell
119 aout
120 elf
2 1 0xc1f51000 7000 linprocfs.ko
Contains modules:
Id Name
121 linprocfs
3 1 0xc1fbb000 2000 blank_saver.ko
Contains modules:
Id Name
122 blank_saver
4 1 0xc1fbd000 14000 linux.ko
Contains modules:
Id Name
123 linuxelf
124 linuxaout
5 1 0xc1fea000 9000 agp.ko
Contains modules:
Id Name
125 pci/agp_intel
126 pci/agp_via
127 pci/agp_sis
128 pci/agp_ali
129 pci/agp_amd
130 pci/agp_i810
6 1 0xc1ffa000 16000 mga.ko
Contains modules:
Id Name
131 pci/mga
>How-To-Repeat:
Happens every time with above configuration.
>Fix:
None found, maintainer was informed a while ago.
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020217154850.213F1225BC>