Date: Wed, 31 Mar 1999 10:00:44 +0200 (CEST) From: Edwin de Graaf <graaf@iae.nl> To: freebsd-scsi@freebsd.org Cc: admin@iae.nl Subject: CAM timeout in dataout phase (3.1-STABLE) Message-ID: <19990331075950.7691794F1@surf.iae.nl>
next in thread | raw e-mail | index | archive | help
On a 3.1-STABLE server with an onboard Adaptec controller we are getting these messages: Adaptec boot: ------------- ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 12 on pci0.6.0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs DTC RAID controller boot: ------------------------- da1 at ahc0 bus 0 target 1 lun 0 da1: <DOMEX DMX-8230 0211> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 25500MB (52224000 512 byte sectors: 255H 63S/T 3250C) Timeout error messages: ----------------------- Mar 30 10:24:30 iaehv /kernel: (da1:ahc0:0:1:0): SCB 0x2a - timed out in dataoutphase, SEQADDR == 0x5d Mar 30 10:24:30 iaehv /kernel: (da1:ahc0:0:1:0): BDR message in message buffer Mar 30 10:24:31 iaehv /kernel: (da1:ahc0:0:1:0): SCB 0x2a - timed out in dataoutphase, SEQADDR == 0x5d Mar 30 10:24:31 iaehv /kernel: (da1:ahc0:0:1:0): no longer in timeout, status =34b Mar 30 10:24:31 iaehv /kernel: ahc0: Issued Channel A Bus Reset. 255 SCBs aborted Could anyone suggest a solution, or a way to find out what is going on here? The sources for 3.1-STABLE were compiled about two weeks ago, should we resup? Thanks a lot for your help. Best regards, Edwin de Graaf -- "O Oysters, come and walk with us!" The Walrus did beseech. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990331075950.7691794F1>