Date: Tue, 17 Aug 2004 20:28:13 +1000 From: Michael McCormack <jne@iinet.net.au> To: freebsd-mobile@freebsd.org Subject: -CURRENT and NEWCARD Message-ID: <4121DDBD.7040600@iinet.net.au>
next in thread | raw e-mail | index | archive | help
I hate to complain, because my latest CVSUP (yesterday) is the only
version of ANY unix EVER to cope with the weird BIOS on my armada E500,
to the extent that I can actually run X on it now..
But is anybody else having trouble with -CURRENT and NEWCARD? more
specifically, errors of the type:
device_probe_and_attach: xxxx attach returned 6
where xxxx is any given PCMCIA card driver
I've googled on this, found a lot of problem reports but very few
solutions; adding hw.pci.allow_unsupported_io_range=1 to loader.conf
didn't work.
Anybody have any ideas?
dmesg follows.
--
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Mon Aug 16 23:43:31 EST 2004
root@Avestriel:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (796.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 402587648 (383 MB)
avail memory = 384266240 (366 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ RSDTBL> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
acpi link get: empty IRQ resource
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0x50000000-0x53ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.C005.C012 -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1225 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11 at
device 4.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1225 PCI-CardBus Bridge> mem 0x41200000-0x41200fff irq 11 at
device 4.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x4010-0x401f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4020-0x403f irq
11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Atmel UHB124 hub, class 9/0, rev 1.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x4040-0x407f mem
0x41100000-0x4111ffff,0x41280000-0x41280fff irq 11 at device 9.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:d0:59:4c:0d:04
fxp0: [GIANT-LOCKED]
pci0: <simple comms, UART> at device 9.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib2
atapci1: <CMD 646U2 UDMA33 controller> port
0x190-0x19f,0x364-0x367,0x160-0x167,0x3e4-0x3e7,0x1e0-0x1e7 irq 11 at
device 7.0 on pci4
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_cmbat2: <Control Method Battery> on acpi0
acpi_cmbat3: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2
on acpi0
sio1 port 0x100-0x107,0x3e8-0x3ef irq 3 drq 5 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd17ff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 796541185 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ATAPI_RESET time = 60us
ad0: 9590MB <IBM-DJSA-210/JS2OAB8A> [19485/16/63] at ata0-master UDMA33
acd0: CDROM <CD-224E/9.8C> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4121DDBD.7040600>