Date: Fri, 26 Sep 1997 14:00:51 GMT From: jm@pluriproj.pt (Jose Monteiro) To: freebsd-questions@FreeBSD.ORG Subject: Problem starting X Message-ID: <3434bf91.20889477@mail.leirianet.pt>
next in thread | raw e-mail | index | archive | help
Hi,
I've properly (I think) configured X with XF86Config, but when i try
to startx I get the following messages:
root@thor ~/ #startx
XFree86 Version 3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6100)
Release Date: Oct 26 1996
If the server is older than 6-12 months, or if your card is
newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: FreeBSD 2.2.0
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, et4000, et4000w32, et4000w32i, et4000w32p,
et4000w32p,
et6000, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24,
wd90c31,
wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d,
tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9320lcd, tgui9400cxi,
tgui9420,
tgui9420dgi, tgui9430dgi, tgui9440agi, tgui9660xgi, tgui9680,
cyber938x, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
clgd5429,
clgd5430, clgd5434, clgd5436, clgd5446, clgd5462, clgd5464,
clgd6205,
clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
clgd7548,
ncr77c22, ncr77c22e, mga2064w, oti067, oti077, oti087, oti037c,
al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410,
cl6412,
cl6420, cl6440, video7, ct65520, ct65530, ct65540, ct65545,
ct65546,
ct65548, ct65550, ct65554, ark1000vl, ark1000pv, ark2000pv,
ark2000mt,
mx, realtek, AP6422, generic
Using syscons driver with X support (version 2.0)
(using VT number 4)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "pt"
(**) Mouse: type: Microsoft, device: /dev/ttyd0, baudrate: 1200,
samplerate: 35, 3 button emulation (timeout: 55ms)
(**) SVGA: Graphics device ID: "Primary Card"
(**) SVGA: Monitor ID: "Primary Monitor"
(--) SVGA: Mode "640x480" needs hsync freq of 31.43 kHz. Deleted.
(--) SVGA: Mode "320x240" needs vert refresh rate of 60.07 Hz.
Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) SVGA: PCI: ATI Mach64 CT rev 9, Memory @ 0xc0000000
ATI 264CT graphics controller detected.
Chip type 0053 (CT), class 0, revision 0x9.
Sparse I/O base is 0x02EC
ATI Mach64 video adapter detected.
Internal RAMDAC (subtype 0) detected.
Internal programmable clock generator detected.
(--) SVGA: chipset: ati
(--) SVGA: videoram: 2048k
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(--) SVGA: There is no mode definition named "640x480"
(--) SVGA: Removing mode "640x480" from list of valid modes.
(--) SVGA: There is no mode definition named "320x240"
Fatal server error:
No valid modes found.
X connection to :0.0 broken (explicit kill or server shutdown).
root@thor ~/ #
What's missing?
Thanks in advance,
Jose Monteiro
*--------------Jose Monteiro <jm@pluriproj.pt>--------------*
| Pluriproj - Redes e Sistemas de Comunicacoes Lda. |
| Agente IP em Leiria http://www.pluriproj.pt |
*.¸¸.·´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸¸.·*
| Tel: +351 44 8182063 Fax: +351 44 8182061 |
| Finger me or search key servers for my PGP public key |
*-----------------------------------------------------------*
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3434bf91.20889477>