Date: Thu, 23 Jun 2011 10:30:28 GMT From: "Majdi S. Abbas" <msa@latt.net> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/158201: re0 driver quit working on Acer AO751h between 8.0 and 8.2 (also 9.0) Message-ID: <201106231030.p5NAUS32041683@red.freebsd.org> Resent-Message-ID: <201106231040.p5NAe8aA095409@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 158201
>Category: i386
>Synopsis: re0 driver quit working on Acer AO751h between 8.0 and 8.2 (also 9.0)
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Jun 23 10:40:08 UTC 2011
>Closed-Date:
>Last-Modified:
>Originator: Majdi S. Abbas
>Release: 8.2-RELEASE or 9.0-CURRENT
>Organization:
Lattice, L.L.C.
>Environment:
FreeBSD 9.0-CURRENT #1: Wed Jun 22 14:55:31 MST 2011
root@:/usr/src/sys/i386/compile/AO751h i386
>Description:
The re driver worked on this machine in 8.0.
Sometime between then and 8.2-RELEASE, it stopped working. It still doesn't work in -HEAD (as of 22-JUN-2011.)
Relevant dmesg output:
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd0110000-0xd0110fff,0xd0100000-0xd010ffff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: 00:23:8b:e5:63:3e
re0: link state changed to UP
After boot, if one attempts to use the interface (in this case via dhclient),
the interface sits there and flaps and hits watchdog resets
re0: link state changed to DOWN
re0: link state changed to UP
re0: watchdog timeout
re0: link state changed to DOWN
re0: link state changed to UP
re0: watchdog timeout
re0: link state changed to DOWN
re0: link state changed to UP
>How-To-Repeat:
Attempt to use attached re0 interface on 8.2 or -HEAD on a host with following card:
re0@pci0:2:0:0: class=0x020000 card=0x02441025 chip=0x813610ec rev=0x02 hdr=0x00
Here's the config for this build, but this occurs with GENERIC as well:
# Acer Aspire AO751h config
cpu I686_CPU
ident AO751h
#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options FLOWTABLE # per-cpu routing cache
#options KDTRACE_HOOKS # Kernel DTrace hooks
options INCLUDE_CONFIG_FILE # Include this file in kernel
options KDB # Kernel debugger related code
options KDB_TRACE # Print a stack trace for a panic
# To make an SMP kernel, the next two lines are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device pci
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
options ATA_STATIC_ID # Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device uart # Generic UART driver
# Parallel port
device ppbus # Parallel port bus (required)
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device ath # Atheros pci/cardbus NIC's
device ath_hal # pci/cardbus chip support
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
device ath_rate_sample # SampleRate tx rate control for ath
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device vlan # 802.1Q VLAN support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
options USB_DEBUG # enable debug msgs
device uhci # UHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
# USB Serial devices
device u3g # USB-based 3G modems (Option, Huawei, Sierra)
device uftdi # For FTDI usb serial adapters
device uplcom # Prolific PL-2303 serial adapters
# USB Wireless
device rum # Ralink Technology RT2501USB wireless NICs
device uath # Atheros AR5523 wireless NICs
device ural # Ralink Technology RT2500USB wireless NICs
device zyd # ZyDAS zb1211/zb1211b wireless NICs
device dcons # Dumb console driver
device dcons_crom # Configuration ROM for dcons
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201106231030.p5NAUS32041683>