Date: Tue, 22 Jul 1997 20:09:39 +0200 (MET DST) From: Tomas Klockar <dateck@ludd.luth.se> To: multimedia@FreeBSD.ORG Subject: problems with guspnp pro & vat Message-ID: <199707221809.UAA00802@sister.ludd.luth.se>
next in thread | raw e-mail | index | archive | help
Hi! I have a small problem. When I use vat i can't send anything. I have just compiled in guspnp11.tar.gz in my kernel. It haven't worked before and it's still not working. My sound card is a Real GUS PnP Pro. Dvs I bought it this way. I have 8MB ram on it. I have Their mic and its plugged in to the soundcard. Is this a vat problem or are anything broken in guspnp11 ? I would guess vat but... Version of vat 4.0b2 Playing works perfect. Here's cat /dev/sndstat VoxWare Sound Driver:3.5-alpha11-9707221 (Mon Jul 21 18:41:01 PDT 1997 Amancio Hasty@rah.star-gate.com) Config options: Installed drivers: Type 4: Gravis Ultrasound Card config: Gravis Ultrasound at 0x220 irq 5 drq 3,1 Audio devices: 0: GUS PNP (CS4231) (DUPLEX) 1: Gravis UltraSound (DUPLEX) Synth devices: 0: Gravis PNP (1024k) Midi devices: 0: Gravis UltraSound Midi Timers: 0: System clock 1: GUS Mixers: 0: AD1848/CS4248/CS4231 1: Gravis Ultrasound and dmesg avail memory = 18411520 (17980K bytes) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16450 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface mse0: disabled, not probed. psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 765 fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa wdc0: unit 0 (wd0): <ST52520A>, multi-block-16 wd0: 2446MB (5009760 sectors), 4970 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): <ST3660A>, multi-block-16 wd1: 520MB (1065456 sectors), 1057 cyls, 16 heads, 63 S/T, 512 B/S wdc1 not found at 0x170 aic0 at 0x140-0x15f irq 11 on isa (aic0:5:0): "IOMEGA ZIP 100 N*32" type 0 removable SCSI 2 sd0(aic0:5:0): Direct-Access sd0(aic0:5:0): ILLEGAL REQUEST asc:24,0 Invalid field in CDB sd0 could not mode sense (4). Using ficticious geometry 96MB (196608 512 byte sectors) 1 3C5x9 board(s) on ISA found at 0x300 ep0 at 0x300-0x30f irq 10 on isa ep0: aui/utp/bnc[*UTP*] address 00:20:af:42:ee:33 npx0 on motherboard npx0: INT 16 interface joy0 at 0x201 on isa joy0: joystick -- sndtable_probe(4) -- installing card 0 -- Driver name 'Gravis Ultrasound' probe 0xf01d1888 Checking for GUS Plug-n-Play ... Board Vendor ID: GRV0001 Board Serial Number: 00000001 -- Hardware probed OK gus0 at 0x220 irq 5 drq 3 flags 0x101 on isa sndtable_init_card(4) entered Located card - calling attach routine ad1848_detect(32c) ad1848_detect() - step A ad1848_detect() - step B, test indirect register ad1848_detect() - step C ad1848_detect() - step D, last 4 bits of I12 readonly ad1848: detect - chip revision 0x0a ad1848_detect() - step F ad1848_detect() - step G ad1848_detect() - step H ad1848_detect() - step I ad1848_detect() - step I ad1848_detect() - step K ad1848_detect() - step L ad1848_detect() - Detected OK ad1848_detect(32c) at 0x32c dma 1,3 at 0x220 irq 5 dma 3,1 attach routine finished isa_dmastart: channel 3 busy isa_dmastart: channel 3 busy isa_dmastart: channel 1 busy Suggestions, comments, questions? I would realy like to know whats not working. Thank you. /Tomas -- Tomas Klockar can be found at the following adresses: Kårhusvägen 4:23 | Furuvägen 102 | dateck@ludd.luth.se 977 54 Luleå | 871 52 Härnösand | dateck@solace.mh.se Tel: +46-920-231335 | Tel: +46-611-13393 | d94-tkl@sm.luth.se Mob: +46-70-664 33 26 | qtxtkl@etxb.ericsson.se
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199707221809.UAA00802>